> [EMAIL PROTECTED] wrote: >>> Do you have a POST card? If so, set up a post code at the start of w83977af_early_serial() so you can make sure LinuxBIOS is in fact making >>> it that far. Do a post code with outb(0x[code], 0x80); >>> >> >> For this question the POST is Power-On Self-Test, but I don't know what is >> the POST card !!! > > POST codes are codes sent to port 0x80 while the computer is booting (POST-ing), which can then be detected by an ISA or PCI card, and usually are displayed on an LCD screen. Like this one: > http://www.newegg.com/Product/Product.aspx?Item=N82E16815158065 > > They're also sometimes called PCI debug cards or port 80 debug cards. And you can get them for much cheaper than the one I linked to, I spent like $9 on mine on ebay, with shipping. > > -Corey >
Ok thanks for your explanation, but I don't have a pci or isa port on my embedded motherboard :( regards Tigroo_TDN -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
