On Wed, Apr 18, 2007 at 04:51:52PM -0400, Corey Osgood wrote: > Peter Stuge wrote: > >> In the src/northbridge and src/sourthbridge directories I assume > >> I'll need to create a cx700 directory. > > > > northbridge yes, southbridge maybe. The southbridge seems to be a > > vt8237 core, perhaps you don't need to make a special southbridge > > directory for it. > > > > I'm rather curious, I'm wondering if CX700 = CN700 + VT8237.
Probably. > If that's the case, CX700 should work with CN700 code They've probably tweaked it a bit. It's like GX1+CS5530 -> Geode; Very similar, but not identical. > >> I think I'll have a place where I can at least start working and > >> try things. If I use the EPIA-M setup, do you think I'll at > >> least get that far? > > > > Maybe if you're lucky. epia-m has vt8235. Try it. :) > > VT8235 has its own superio, and epia-m uses it. VT8237 doesn't. Ah. No go then. > Also, the device IDs are entirely different, and so are some of the > registers. I used epia-m as a starting point also, but it requires > a lot of gutting out and fixing up. Aye. I'll attempt an epia-cn port once cn700 is working. Maybe even in v3. //Peter -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
