I play some trick. Rom_address(src/devices/pci_rom.c) is manually set to
0xfff80000 if class is detected as 3 and subclass is detected as 0 (VGA
device). The boot log shows on a monitor, too. The attached is the boot log.
But it is against the purpose of PCI, hardware independence, I still need a
complete solution. Thank you for your support these days, Mr Lu.
========================================================
PCI: 00:0c.0 init
rom address for PCI: 00:0c.0 = fc220000
BTDC: device class = 0
BTDC: device class = 3
BTDC: set rom_address manually
copying VGA ROM Image from 0xfff80000 to 0xc0000, 0x9000 bytes
entering emulator
un-inited int vector
halt_sys: file /home/fengl/LinuxBIOSv2-2584/src/devices/emulator/x86emu/ops.c,
line 4387
=========================================================
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-----Original Message-----
From: yhlu [mailto:[EMAIL PROTECTED]
Sent: Friday, April 27, 2007 2:43 PM
To: Feng, Libo
Cc: [EMAIL PROTECTED]; [email protected]
Subject: Re: How to enable VGA on Tyan S3992?
it looks familiar about mmio resource allocation is not right.
It seems i fixed it some time ago, but it is still in my tree.
Let me compare public tree with my own tree this weekend, or I will send your
my partial tree to you.
YH
LinuxBIOS-2.0.0_Fallback Sat Apr 28 00:15:55 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 started:
SBLink=00
NC node|link=00
begin msr fid, vid 3106121206100202
set vid failed for apicid =00
end msr fid, vid 3106120606100210
ht reset -
LinuxBIOS-2.0.0_Fallback Sat Apr 28 00:15:55 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 started:
SBLink=00
NC node|link=00
begin msr fid, vid 3106120606100210
end msr fid, vid 3106120606100210
SMBus controller enabled
Ram1.00
Ram2.00
device=00000650
SPD_MEM_TYPE=00000008
device=00000651
SPD_MEM_TYPE=fffffffd
device=00000652
SPD_MEM_TYPE=fffffffd
device=00000653
SPD_MEM_TYPE=fffffffd
device=00000654
SPD_MEM_TYPE=fffffffd
device=00000655
SPD_MEM_TYPE=fffffffd
device=00000656
SPD_MEM_TYPE=fffffffd
device=00000657
SPD_MEM_TYPE=fffffffd
Registered
333Mhz
Interleaved
RAM: 0x00100000 KB
Ram3
Initializing memory: done
Setting variable MTRR 02, base: 0000MB, range: 0400MB, type WB
DQS Training:RcvrEn:Pass1: 00
train_DqsRcvrEn: begin ctrl 00000000
TrainRcvEn: 0 ctrl00000000
CTLRMaxDelay=0b
train_DqsRcvrEn: end ctrl 00000000
done
DQS Training:DQSPos: 00
train_DqsPos: begin ctrl 00000000
TrainDQSRdWrPos: 0 ctrl 00000000
TrainDQSRdWrPos: 00000005
train_DqsPos: end ctrl 00000000
done
DQS Training:RcvrEn:Pass2: 00
train_DqsRcvrEn: begin ctrl 00000000
TrainRcvEn: 0 ctrl00000000
CTLRMaxDelay=27
train_DqsRcvrEn: end ctrl 00000000
done
DQS Training:tsc[00]=000000001c8508ba
DQS Training:tsc[01]=0000000020ca4649
DQS Training:tsc[02]=0000000020d604b8
DQS Training:tsc[03]=000000015fe156b7
DQS Training:tsc[04]=000000016525568d
Ram4
v_esp=000cefe4
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffe0000
dst=00100000
linxbios_ram.nrv2b length = 0000d429
linxbios_ram.bin length = 00022490
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_Fallback Sat Apr 28 00:15:55 CST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [1166/0130] enabled
PCI: 00:06.0 [1166/0130] enabled next_unitid: 000c
PCI: 00:00.0 subbordinate bus PCI-X
PCI: 00:00.0 [1166/0036] enabled
PCI: 00:0c.0 [1166/0036] enabled next_unitid: 000f
PCI: pci_scan_bus for bus 00
PCI: 00:01.0 [1166/0036] enabled
PCI: 00:02.0 [1166/0205] enabled
PCI: 00:02.1 [1166/0214] enabled
PCI: 00:02.2 [1166/0234] enabled
PCI: 00:02.3 [1166/0238] enabled
PCI: 00:02.4 [1166/0235] enabled
PCI: 00:02.5 [1166/0235] enabled
PCI: 00:02.6 [1166/0235] enabled
PCI: 00:03.0 [1166/0223] enabled
PCI: 00:03.1 [1166/0223] enabled
PCI: 00:03.2 [1166/0223] enabled
PCI: 00:04.0 [8086/1229] enabled
PCI: 00:06.0 [1166/0130] enabled
PCI: 00:07.0 [1166/0130] enabled
PCI: 00:08.0 [1166/0132] enabled
PCI: 00:09.0 [1166/0132] enabled
PCI: 00:0a.0 [1166/0132] enabled
PCI: 00:0b.0 [1166/0132] enabled
PCI: 00:0c.0 [1002/515e] enabled
PCI: pci_scan_bus for bus 01
PCI: 01:0d.0 subbordinate bus PCI-X
PCI: 01:0d.0 [1166/0104] enabled
PCI: 01:0e.0 [1166/024a] enabled
PCI: 01:0e.1 [1166/024a] enabled
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: 02: Conventional PCI
PCI: pci_scan_bus returning with max=002
PCI: 01: 133MHz PCI-X
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: 04:04.0 [14e4/166a] enabled
PCI: 04:04.1 [14e4/166a] enabled
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus for bus 08
PCI: pci_scan_bus returning with max=008
PCI: pci_scan_bus returning with max=008
PCI: pci_scan_bus returning with max=008
done
Allocating resources...
Reading resources...
PCI: 01:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
PCI: 01:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
PCI: 01:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
PCI: 00:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 01 prefmem
PCI: 00:06.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:06.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:07.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:07.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:08.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:08.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:08.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:09.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:09.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:09.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 08 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 08 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 08 mem
LinuxBIOS-2.0.0_Fallback Sat Apr 28 00:15:55 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 started:
SBLink=00
NC node|link=00
begin msr fid, vid 3106121206100202
set vid failed for apicid =00
end msr fid, vid 3106120606100210
ht reset -
LinuxBIOS-2.0.0_Fallback Sat Apr 28 00:15:55 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 started:
SBLink=00
NC node|link=00
begin msr fid, vid 3106120606100210
end msr fid, vid 3106120606100210
SMBus controller enabled
Ram1.00
Ram2.00
device=00000650
SPD_MEM_TYPE=00000008
device=00000651
SPD_MEM_TYPE=fffffffd
device=00000652
SPD_MEM_TYPE=fffffffd
device=00000653
SPD_MEM_TYPE=fffffffd
device=00000654
SPD_MEM_TYPE=fffffffd
device=00000655
SPD_MEM_TYPE=fffffffd
device=00000656
SPD_MEM_TYPE=fffffffd
device=00000657
SPD_MEM_TYPE=fffffffd
Registered
333Mhz
Interleaved
RAM: 0x00100000 KB
Ram3
Initializing memory: done
Setting variable MTRR 02, base: 0000MB, range: 0400MB, type WB
DQS Training:RcvrEn:Pass1: 00
train_DqsRcvrEn: begin ctrl 00000000
TrainRcvEn: 0 ctrl00000000
CTLRMaxDelay=0a
train_DqsRcvrEn: end ctrl 00000000
done
DQS Training:DQSPos: 00
train_DqsPos: begin ctrl 00000000
TrainDQSRdWrPos: 0 ctrl 00000000
TrainDQSRdWrPos: 00000005
train_DqsPos: end ctrl 00000000
done
DQS Training:RcvrEn:Pass2: 00
train_DqsRcvrEn: begin ctrl 00000000
TrainRcvEn: 0 ctrl00000000
CTLRMaxDelay=27
train_DqsRcvrEn: end ctrl 00000000
done
DQS Training:tsc[00]=000000001c83c079
DQS Training:tsc[01]=0000000020a07aba
DQS Training:tsc[02]=0000000020ac396d
DQS Training:tsc[03]=000000015fddcd1c
DQS Training:tsc[04]=00000001653762f1
Ram4
v_esp=000cefe4
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffe0000
dst=00100000
linxbios_ram.nrv2b length = 0000d429
linxbios_ram.bin length = 00022490
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_Fallback Sat Apr 28 00:15:55 CST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [1166/0130] enabled
PCI: 00:06.0 [1166/0130] enabled next_unitid: 000c
PCI: 00:00.0 subbordinate bus PCI-X
PCI: 00:00.0 [1166/0036] enabled
PCI: 00:0c.0 [1166/0036] enabled next_unitid: 000f
PCI: pci_scan_bus for bus 00
PCI: 00:01.0 [1166/0036] enabled
PCI: 00:02.0 [1166/0205] enabled
PCI: 00:02.1 [1166/0214] enabled
PCI: 00:02.2 [1166/0234] enabled
PCI: 00:02.3 [1166/0238] enabled
PCI: 00:02.4 [1166/0235] enabled
PCI: 00:02.5 [1166/0235] enabled
PCI: 00:02.6 [1166/0235] enabled
PCI: 00:03.0 [1166/0223] enabled
PCI: 00:03.1 [1166/0223] enabled
PCI: 00:03.2 [1166/0223] enabled
PCI: 00:04.0 [8086/1229] enabled
PCI: 00:06.0 [1166/0130] enabled
PCI: 00:07.0 [1166/0130] enabled
PCI: 00:08.0 [1166/0132] enabled
PCI: 00:09.0 [1166/0132] enabled
PCI: 00:0a.0 [1166/0132] enabled
PCI: 00:0b.0 [1166/0132] enabled
PCI: 00:0c.0 [1002/515e] enabled
PCI: pci_scan_bus for bus 01
PCI: 01:0d.0 subbordinate bus PCI-X
PCI: 01:0d.0 [1166/0104] enabled
PCI: 01:0e.0 [1166/024a] enabled
PCI: 01:0e.1 [1166/024a] enabled
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: 02: Conventional PCI
PCI: pci_scan_bus returning with max=002
PCI: 01: 133MHz PCI-X
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: 04:04.0 [14e4/166a] enabled
PCI: 04:04.1 [14e4/166a] enabled
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus for bus 08
PCI: pci_scan_bus returning with max=008
PCI: pci_scan_bus returning with max=008
PCI: pci_scan_bus returning with max=008
done
Allocating resources...
Reading resources...
PCI: 01:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
PCI: 01:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
PCI: 01:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
PCI: 00:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 01 prefmem
PCI: 00:06.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:06.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:07.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:07.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:08.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:08.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:08.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:09.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:09.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:09.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 08 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 08 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 08 mem
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
Done reading resources.
Allocating VGA resource PCI: 00:0c.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc2fffff] mem <node 0 link 0>
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:18.0 1da <- [0x0000004000 - 0x0000003fff] io <node 0 link 2>
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:18.0 1aa <- [0x00fc300000 - 0x00fc2fffff] prefmem <node 0 link 2>
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:18.0 1a2 <- [0x00fc300000 - 0x00fc2fffff] mem <node 0 link 2>
PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] bus 01 io
PCI: 00:01.0 20 <- [0x00fc000000 - 0x00fc0fffff] bus 01 mem
PCI: 01:0e.0 10 <- [0x0000001030 - 0x0000001037] io
PCI: 01:0e.0 14 <- [0x0000001070 - 0x0000001073] io
PCI: 01:0e.0 18 <- [0x0000001040 - 0x0000001047] io
PCI: 01:0e.0 1c <- [0x0000001080 - 0x0000001083] io
PCI: 01:0e.0 20 <- [0x0000001000 - 0x000000101f] io
PCI: 01:0e.0 24 <- [0x00fc020000 - 0x00fc021fff] mem
PCI: 01:0e.0 30 <- [0x00fc000000 - 0x00fc01ffff] romem
PCI: 01:0e.1 10 <- [0x0000001050 - 0x0000001057] io
PCI: 01:0e.1 14 <- [0x0000001090 - 0x0000001093] io
PCI: 01:0e.1 18 <- [0x0000001060 - 0x0000001067] io
PCI: 01:0e.1 1c <- [0x00000010a0 - 0x00000010a3] io
PCI: 01:0e.1 20 <- [0x0000001020 - 0x000000102f] io
PCI: 00:02.0 90 <- [0x0000003040 - 0x000000304f] io
PCI: 00:02.1 10 <- [0x0000003060 - 0x0000003067] io
PCI: 00:02.1 14 <- [0x0000003080 - 0x0000003083] io
PCI: 00:02.1 18 <- [0x0000003070 - 0x0000003077] io
PCI: 00:02.1 1c <- [0x0000003090 - 0x0000003093] io
PCI: 00:02.1 20 <- [0x0000003050 - 0x000000305f] io
PCI: 00:02.1 64 <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:02.3 10 <- [0x00fc250000 - 0x00fc250fff] mem
PCI: 00:02.4 10 <- [0x00fc251000 - 0x00fc251fff] mem
PCI: 00:02.5 10 <- [0x00fc252000 - 0x00fc252fff] mem
PCI: 00:02.6 10 <- [0x00fc253000 - 0x00fc253fff] mem
PCI: 00:03.0 10 <- [0x00fc254000 - 0x00fc254fff] mem
PCI: 00:03.0 14 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:03.1 10 <- [0x00fc255000 - 0x00fc255fff] mem
PCI: 00:03.1 14 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:03.2 10 <- [0x00fc256000 - 0x00fc256fff] mem
PCI: 00:03.2 14 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:04.0 10 <- [0x00fc257000 - 0x00fc257fff] mem
PCI: 00:04.0 14 <- [0x0000003000 - 0x000000303f] io
PCI: 00:04.0 18 <- [0x00fc200000 - 0x00fc21ffff] mem
PCI: 00:07.0 20 <- [0x00fc100000 - 0x00fc1fffff] bus 04 mem
PCI: 04:04.0 10 <- [0x00fc100000 - 0x00fc10ffff] mem64
PCI: 04:04.0 18 <- [0x00fc110000 - 0x00fc11ffff] mem64
PCI: 04:04.1 10 <- [0x00fc120000 - 0x00fc12ffff] mem64
PCI: 04:04.1 18 <- [0x00fc130000 - 0x00fc13ffff] mem64
PCI: 00:0c.0 10 <- [0x00f0000000 - 0x00f7ffffff] prefmem
PCI: 00:0c.0 14 <- [0x0000002c00 - 0x0000002cff] io
PCI: 00:0c.0 18 <- [0x00fc240000 - 0x00fc24ffff] mem
PCI: 00:0c.0 30 <- [0x00fc220000 - 0x00fc23ffff] romem
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 147
PCI: 01:0d.0 bridge ctrl <- 0003
PCI: 01:0d.0 cmd <- 140
PCI: 01:0e.0 cmd <- 143
PCI: 01:0e.1 cmd <- 141
PCI: 00:02.0 cmd <- 147
PCI: 00:02.1 cmd <- 141
PCI: 00:02.2 cmd <- 144
PCI: 00:02.3 cmd <- 146
PCI: 00:02.4 cmd <- 146
PCI: 00:02.5 cmd <- 146
PCI: 00:02.6 cmd <- 146
PCI: 00:03.0 cmd <- 143
PCI: 00:03.1 cmd <- 143
PCI: 00:03.2 cmd <- 143
PCI: 00:04.0 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0003
PCI: 00:06.0 cmd <- 140
PCI: 00:07.0 bridge ctrl <- 0003
PCI: 00:07.0 cmd <- 146
PCI: 04:04.0 cmd <- 142
PCI: 04:04.1 cmd <- 142
PCI: 00:08.0 bridge ctrl <- 0003
PCI: 00:08.0 cmd <- 140
PCI: 00:09.0 bridge ctrl <- 0003
PCI: 00:09.0 cmd <- 140
PCI: 00:0a.0 bridge ctrl <- 0003
PCI: 00:0a.0 cmd <- 140
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 cmd <- 1c3
PCI: 00:00.0 missing enable_resources
PCI: 00:01.0 missing enable_resources
PCI: 00:02.0 missing enable_resources
PCI: 00:03.0 missing enable_resources
PCI: 00:04.0 missing enable_resources
PCI: 00:05.0 missing enable_resources
PCI: 00:00.0 missing enable_resources
PCI: 00:01.0 missing enable_resources
PCI: 00:01.1 missing enable_resources
PCI: 00:01.2 missing enable_resources
PCI: 00:01.3 missing enable_resources
PCI: 00:01.4 missing enable_resources
PCI: 00:01.5 missing enable_resources
PCI: 00:01.6 missing enable_resources
PCI: 00:02.0 missing enable_resources
PCI: 00:02.1 missing enable_resources
PCI: 00:02.2 missing enable_resources
PCI: 00:03.0 missing enable_resources
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
Initializing CPU #1
Initializing CPU #0
CPU: vendor AMD device 40f12
CPU: vendor AMD device 40f12
CPU: family 0f, model 41, stepping 02
CPU: family 0f, model 41, stepping 02
brandId=0351
brandId=0351
Enabling cache
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB
Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Opteron(tm) Processor 172
CPU model AMD Opteron(tm) Processor 172
Setting up local apic...Setting up local apic... apic_id: 0x01 done.
apic_id: 0x00 done.
CPU #1 Initialized
Clearing memory 2048K - 1048576K: --------------- done
CPU #0 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:02.0 init
PCI: 00:02.1 init
PCI: 00:02.2 init
RTC Init
Invalid CMOS LB checksum
PCI: 00:02.3 init
PCI: 00:02.4 init
PCI: 00:02.5 init
PCI: 00:02.6 init
PCI: 00:03.0 init
PCI: 00:03.1 init
PCI: 00:03.2 init
PCI: 00:04.0 init
PCI: 00:08.0 init
PCI: 00:09.0 init
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
rom address for PCI: 00:0c.0 = fc220000
BTDC: device class = 0
BTDC: device class = 3
BTDC: set rom_address manually
copying VGA ROM Image from 0xfff80000 to 0xc0000, 0x9000 bytes
entering emulator
un-inited int vector
halt_sys: file /home/fengl/LinuxBIOSv2-2584/src/devices/emulator/x86emu/ops.c, l
ine 4387
PCI: 01:0e.0 init
init PHY...
port 0 PHY status = 04
after reset port 0 PHY status = 04
port 1 PHY status = 04
after reset port 1 PHY status = 04
port 2 PHY status = 04
after reset port 2 PHY status = 04
port 3 PHY status = 04
after reset port 3 PHY status = 04
PCI: 01:0e.1 init
PCI: 04:04.0 init
PCI: 04:04.1 init
Devices initialized
bus_isa=4
bus_isa=5
bus_isa=6
bus_isa=7
bus_isa=8
bus_isa=9
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 0000024c
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000de8 checksum a2f0
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdffff
Found ELF candidate at offset 0
New segment addr 0x100000 size 0x3de70 offset 0xc0 filesize 0x14328
(cleaned up) New segment addr 0x100000 size 0x3de70 offset 0xc0 filesize 0x14328
New segment addr 0x13de80 size 0x48 offset 0x14400 filesize 0x48
(cleaned up) New segment addr 0x13de80 size 0x48 offset 0x14400 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x000000003ff68000 memsz: 0x000000000003de70 filesz: 0x00
00000000014328
Clearing Segment: addr: 0x000000003ff7c328 memsz: 0x0000000000029b48
Loading Segment: addr: 0x000000003ffa5e80 memsz: 0x0000000000000048 filesz: 0x00
00000000000048
Jumping to boot code at 0x10eb48
FILO version 0.5 ([EMAIL PROTECTED]) Wed Apr 11 22:30:37 CST 2007
menu: hda3:/boot/filo/menu.lst
IDE time out
No drive detected on IDE channel 0
Press any key to continue.
Press any key to continue.
Press any key to continue.
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
