roger wrote: > On Thu, 2007-04-26 at 23:35 -0700, roger wrote: > >> On Fri, 2007-04-27 at 00:45 +0200, Uwe Hermann wrote: >> > > >>> Strange, the patch looks correct. Have you tried all variations in this >>> line (0x2e, 0x4e, 0x3f0, 0x3f8)? >>> >> I'm not sure exactly which iobase ports I haven't tried. >> >> But I just realized. We're not assigning a iobase to the port yet.. >> this is just needed for early_serial.c to get an initial console >> correct? >> >> If so, my bag. Although 0x3f8 should work, I should really try all of >> them then. >> > > Just a quick note, from the success I've just experienced with the > LinuxBiosV2 on my Tyan S1832DL board just now, console_init seems not to > be taking place at all. The DFI P2XBL post codes go in a regular > session "0x80 > 0x88 > 0xE7 (or whatever)" and takes a span of several > seconds. Linuxbios boots in milliseconds. I should be seeing tons of > stuff coming out on the serial port, but nothing. Remove everything but the serial stuff (and mtrr init) from auto.c, and see if those post codes still appear. I suspect that port 80 is being used for a timer, and that's what you're seeing.
-Corey -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
