On Wed, May 02, 2007 at 08:01:14AM +0200, Marcel Graber wrote: > Is there a solution to get the via epia-m2 board to auto Power
There's a simple way to do it in hardware at least, put a capacitor over the PWRSW pins. I've gotten the most reliable results with a 1uF electrolytic capacitor, higher capacitances have been unreliable. (Note the polarity if you're using an electrolytic capacitor.) //Peter -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
