it is MB related, it should be in MB/mainboard.c YH
On 5/11/07, Ward Vandewege <[EMAIL PROTECTED]> wrote: > Hi all, > > This patch initializes fan control on the ADT7463/ADM1027 chip to be > dynamically regulated by the hardware, and sets sane temperature treshold > values. > > Note that this is *not* the same as what the proprietary bios does on the > Tyan S2881; that BIOS initializes the fans to blow at full speed, but sets > fan control to manual mode allowing programmatic control of fan speed. > > It's easy to change the fan control mode to manual once the machine has > booted, so this seems like a smarter approach - the fans should last longer, > and they will use less power. Machines will also be a whole lot quieter. > > There are a few mainboard specific bits for the s2881 missing, but I've still > got to figure out how to get those loaded at the right time (i.e. after the > adm1027 code has been run). > > Comments more than welcome, of course. > > Thanks, > Ward. > > -- > Ward Vandewege <[EMAIL PROTECTED]> > Free Software Foundation - Senior System Administrator > > -- > linuxbios mailing list > [email protected] > http://www.linuxbios.org/mailman/listinfo/linuxbios > > -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
