[EMAIL PROTECTED] wrote:
> Quoting [EMAIL PROTECTED]:
>
>> Hello,
>> Pardon my C, can you tell me if this function is setup correctly and
>> going to return the correct value to the register??
>>
>> /* This function sets the DRAM Controller Mode Register to NOP. */
>> static long set_drc_mode_nop(const struct mem_controller *ctrl)
>> {
>> pci_write_config32(ctrl->f0, DRC, (1<<4));
>> return 0;
>> }
>>
>>
>> Thanks - Joe
>>
>
> Let me elaborate on this. I am wondering if I can use a Bitwise Shift
> Operator in this function or does it need to be a 32 bit hex variable.
>
> pci_write_config32(ctrl->f0, DRC, (1<<4));
>
>
> Thanks - Joe
>
>
Whoops, sorry, meant to respond. Yes, you can use bitwise shift, it just
gets converted to a hex value. Is 0x10 the correct value though? You'd
also run into complexities with CBR, which would be something like (1 <<
4)|(1 << 5). I'd much rather see NOP defined like it is in the 440bx's
raminit.c, it makes things much more readable.
-Corey
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
