Yes I saw ticket #7 after I sent that. Based on a hint that Uniflash works, I punk'd the GPIO enable for this MSI MS-6337, and now it works!
Uniflash was working, but doesn't support SST49LF016C dev=pci_dev_find(0x8086, 0x2440); // ICH2 ISA bridge base=pci_read_word(dev,0x58) & 0x7fc0; val=inb(base+0xe); val |= 0x80; outb(val, base+0xe); Regards, Jeremy On Tue, 2007-05-15 at 23:26 +0200, Uwe Hermann wrote: > On Tue, May 15, 2007 at 04:06:03PM -0400, Jeremy Jackson wrote: > > Ok it seems panic *isn't* the best approach after all: > > > > After dusting off an Intel 82815 + 82801BA (ICH2) based board, and > > reading the datasheets, I find I can get "flashrom" can detect > > SST49LF016C as follows: > > > > Vendor BIOS sets southbridge ICH2 for a 1MB decode, with all but the top > > block having seemingly random IDSEL settings. I corrected this: > > I can't help much with the other stuff, but flashrom not being able to > write on ICH2 is a known problem, I experienced the same. > > http://tracker.linuxbios.org/trac/LinuxBIOS/ticket/7 > > I didn't find the time to look further into the issue, yet. > > > Uwe. > -- > linuxbios mailing list > [email protected] > http://www.linuxbios.org/mailman/listinfo/linuxbios -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
