yo dudes, this is good to know. too bad, elitegroup top hat flash does not work on M57. maybe thf requires a fwh instead of lpc or particular circuitry on the mainboard. so I got to put a socket on as well ...
Andreas B. Mundt schrieb: > Hello everybody! > > Encouraged by the reported success with the Gigabyte M57SLI-S4 > (Many thanks to all contributers!), I started to try this board as well. > I followed ST's instructions with the 2nd socket and the pull-down/switch. > This worked quite fine for me. Two things can perhaps be added to ST's > instructions/wiki: > > - I used a 100k standard resistor (no SMD!) > - the pull-down current to ground is in both cases about 0.033mA. > -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
