Have a look at src/northbridge/via/vt8601/raminit.c, this board is pretty screwy.
On Sun, 2007-05-27 at 21:14 +0200, Markus Boas wrote: > <shnip> > LinuxBIOS-2.0.0.0Fallback Sun May 27 20:19:19 UTC 2007 starting... > 87 is the comm register > SMBus controller enabled > vt8601 init starting > 00000000 is the north > 1106 0601 Odd, this should be 1106 8601... > 0120d4 is the computed timing Right here's one problem, this should be 0x1d0. Looking at raminit.c, this appears to not be used at all, but it still is somewhat concerning > NOP > PRECHARGE > DUMMY READS > CBR > MRS > NORMAL > set ref. rate > enable multi-page open There should be some output from setting the MA map type here. Not sure why there isn't, but it's odd to say the least. > Slot 00 is SDRAM > <snap> > > On screen runs a defect ascii-output throu > > Markus And there's absolutely nothing beyond this? Oh, and the other question: are you using dual-sided dimms? From what I can see, that's what the code's assuming at the moment. -Corey -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
