Hi Indrek,
I didn't get problems with buildrom, the only problem is that it
gets the files from svn and I needed modify some files, so I compiled the
linuxbios by hand.
My Locale is pt_BR and char set is UTF-8.
Regards,
Otávio
On 5/30/07, Indrek Kruusa <[EMAIL PROTECTED]> wrote:
Ühel kenal päeval (kolmapäev 30 mai 2007 3:31 pm) kirjutas Otávio
Alcântara:
> Hello,
>
> I used the buildrom tool
Did you have trouble with buildrom-devel? I mean building the packages
etc.
Currently I can't get it to work.
sed tool can be sensitive to locale (in bad way). I have seen that several
times and the solution is that my estonian default needs "export
LC_ALL=en"
and things start working (especiell configure scripts ). What is your
default
locale and did you have similar trouble?
thanks,
Indrek
> , but the norwich board uses the companion
> serial and my board uses SUPERIO WINBOND w83267hf. So, I modified the
code
> of /mainboar/amd/norwich/cache_as_ram_auto.c to work with this chip.
> It worked fine, but the boot process stop with :
>
> Before VSA:
> do_vsmbios
>
> I'm not including the vsa in the linuxbios.rom, is that the
problem?
> And how can I concatenate the two files correctly?
>
> Regards,
>
> Otávio Alcântara
>
> On 5/24/07, Otávio Alcântara <[EMAIL PROTECTED]> wrote:
> > Thanks Marc,
> >
> > I will try buildrom.
> >
> > Regards,
> >
> > Otavio
> >
> > On 5/23/07, Marc Jones < [EMAIL PROTECTED] > wrote:
> > > Otávio Alcântara wrote:
> > > > I used a dissambly and there is no jump in the reset vector. I've
> > >
> > > tried
> > >
> > > > other board (amd rumba, using the same tools JTAG and memory
> > > > programmer) and it starts normaly the boot process, just don't
finish
> > >
> > > it
> > >
> > > > because the processor is a Geode GX and my board is a LX one. I'll
> > > > try
> > > >
> > > > the norwich board that is similar to mine.
> > > > The problem I saw with msm800 is that linuxbios.rom is not on a
valid
> > > > format, the file doesn't size like the ROM_SIZE option of
> > > > targets/../../Config.lb.
> > > >
> > > > Thanks,
> > > >
> > > > Otávio
> > >
> > > Are you using buildrom?
> > >
> > > http://linuxbios.org/Buildrom
> > >
> > > It is recommended to use it for LX systems. It should handle putting
> > > the
> > >
> > > VSA image with the LB binary to make the complete image.
> > > Marc
> > >
> > > > On 5/23/07, *ron minnich* < [EMAIL PROTECTED]
> > > > <mailto: [EMAIL PROTECTED]>> wrote:
> > > >
> > > > The first thing I ever do with problems of this type is
simple:
> > > > hexdump romimage
> > > >
> > > > and see if I see a jump at end.
> > > >
> > > > ron
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Otávio Alcântara
> > > > "I'll never cross to the Dark Side."
> > >
> > > --
> > > Marc Jones
> > > Senior Software Engineer
> > > (970) 226-9684 Office
> > > mailto: [EMAIL PROTECTED]
> > > http://www.amd.com/embeddedprocessors
> >
> > --
> > Otávio Alcântara
> > "I'll never cross to the Dark Side."
--
Otávio Alcântara
"I'll never cross to the Dark Side."
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
