You could use btext console in LinuxBIOS for it. The etherboot (with filo) should still include btext console too.
YH On 5/31/07, Jeremy Jackson <[EMAIL PROTECTED]> wrote: > Hi, > > I'm using the LinuxBIOS ragexl support, combined with linux framebuffer > driver "atyfb". Doing it this way is 100% native, no vendor BIOS is > needed, but you don't get video until linux has booted. > > Config.lb looks like this > device pci 8.0 on end # SATA 0 > device pci 9.0 on end # PCI > chip drivers/ati/ragexl > device pci 5.0 on end > end > > > The other option is to have LinuxBIOS use the vendor BIOS to initialize > the rageXL chip, you get video earlier but you need to enable the > emulator and retrieve the vendor bios, > > http://linuxbios.org/VGA_support > > Regards, > > Jeremy > > On Thu, 2007-05-31 at 17:43 +0400, Savchenko Mikhail wrote: > > Working with Linuxbios on tyan s2850, want to use... > > > The same question about Ati video interesting to, there is a driver in > > LinusBios sources, can I use it instead of Ami bios part one? > > > > > -- > linuxbios mailing list > [email protected] > http://www.linuxbios.org/mailman/listinfo/linuxbios > -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
