Author: uwe
Date: 2007-06-05 17:02:18 +0200 (Tue, 05 Jun 2007)
New Revision: 2713
Modified:
trunk/LinuxBIOSv2/util/flashrom/README
trunk/LinuxBIOSv2/util/flashrom/board_enable.c
trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c
Log:
flashrom: Document the newly supported IBM x3455 board and the
now-supported Broadcom HT-1000 chipset (trivial).
Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
Acked-by: Uwe Hermann <[EMAIL PROTECTED]>
Modified: trunk/LinuxBIOSv2/util/flashrom/README
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/README 2007-06-05 12:51:52 UTC (rev
2712)
+++ trunk/LinuxBIOSv2/util/flashrom/README 2007-06-05 15:02:18 UTC (rev
2713)
@@ -53,6 +53,7 @@
* IWILL DK8-HTX: use -m iwill:dk8_htx
* Agami Aruma: use -m AGAMI:ARUMA
* ASUS P5A: use -m asus:p5a
+* IBM x3455: use -m ibm:x3455
ROM Layout Support
@@ -153,6 +154,7 @@
AMD Geode SC1100
AMD AMD-8111
ATI SB400
+Broadcom HT-1000
Intel ICH0-ICH8 (all variations)
Intel PIIX4/PIIX4E/PIIX4M
NVIDIA CK804
Modified: trunk/LinuxBIOSv2/util/flashrom/board_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/board_enable.c 2007-06-05 12:51:52 UTC
(rev 2712)
+++ trunk/LinuxBIOSv2/util/flashrom/board_enable.c 2007-06-05 15:02:18 UTC
(rev 2713)
@@ -250,10 +250,10 @@
{
uint8_t byte;
- /* Set GPIO lines in HT1000 southbridge */
+ /* Set GPIO lines in the Broadcom HT-1000 southbridge. */
outb(0x45, 0xcd6);
byte = inb(0xcd7);
- outb(byte|0x20, 0xcd7);
+ outb(byte | 0x20, 0xcd7);
return 0;
}
Modified: trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c 2007-06-05 12:51:52 UTC
(rev 2712)
+++ trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c 2007-06-05 15:02:18 UTC
(rev 2713)
@@ -387,12 +387,11 @@
}
-
static int enable_flash_ht1000(struct pci_dev *dev, char *name)
{
- unsigned char byte;
+ uint8_t byte;
- /* Set the 4MB enable bit */
+ /* Set the 4MB enable bit. */
byte = pci_read_byte(dev, 0x41);
byte |= 0x0e;
pci_write_byte(dev, 0x41, byte);
@@ -462,7 +461,7 @@
{0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, /* ATI
Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
- {0x1166, 0x0205, "BCM HT1000", enable_flash_ht1000},
+ {0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000},
};
/*
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
