Can you try using just 1 memory module to start with and see if that helps.
>Hi! > >I checked out r2717 and at first it behaved like Markus Boas Epia V >but then I applied Ben's patch to the vt8231_early_serial.c and it >booted into filo, once, then hanged at the dram setup. then I applied >the vt8231_lpc.c patch and it hangs on this: > >LinuxBIOS-2.0.0.0Normal Mon Jun 11 22:28:57 CEST 2007 starting... >87 is the comm register >SMBus controller enabled >vt8601 init starting >00000000 is the north > 1106 0601 >0120d4 is the computed timing > NOP >PRECHARGE >DUMMY READS >CBR >MRS >NORMAL >set ref. rate >enable multi-page open >Slot 00 is SDRAM 10000000 bytes >000e is the MA type >Slot 01 is SDRAM 08000000 bytes x2 >000c is the MA type >Slot 02 is empty >Slot 03 is empty >vt8601 done >Copying LinuxBIOS to RAM. >Jumping to LinuxBIOS. >LinuxBIOS-2.0.0.0Normal Mon Jun 11 22:28:57 CEST 2007 booting... >Enumerating buses... >scan_static_bus for Root Device >Finding PCI configuration type. >PCI: Using configuration type 1 >PCI_DOMAIN: 0000 enabled >APIC_CLUSTER: 0 enabled >PCI_DOMAIN: 0000 scanning... >PCI: pci_scan_bus for bus 00 >PCI: 00:00.0 [1106/0601] ops >PCI: 00:00.0 [1106/0601] enabled >malloc Enter, size 668, free_mem_ptr 00018000 >malloc 0x00018000 >Capability: 0x07 @ 0x80 >Capability: 0x08 @ 0x80 >Capability: 0x10 @ 0x80 >PCI: 00:01.0 [1106/8601] enabled >PCI: devfn 0x10, bad id 0xffffffff >PCI: devfn 0x18, bad id 0xffffffff >PCI: devfn 0x20, bad id 0xffffffff >PCI: devfn 0x28, bad id 0xffffffff >PCI: devfn 0x30, bad id 0xffffffff >PCI: devfn 0x38, bad id 0xffffffff >PCI: devfn 0x40, bad id 0xffffffff >PCI: devfn 0x48, bad id 0xffffffff >PCI: devfn 0x50, bad id 0xffffffff >PCI: devfn 0x58, bad id 0xffffffff >PCI: devfn 0x60, bad id 0xffffffff >PCI: devfn 0x68, bad id 0xffffffff >PCI: devfn 0x70, bad id 0xffffffff >PCI: devfn 0x78, bad id 0xffffffff >PCI: devfn 0x80, bad id 0xffffffff >PCI: 00:11.0 [1106/8231] bus ops >PCI: 00:11.0 [1106/8231] enabled >PCI: 00:11.1 [1106/0571] ops >PCI: 00:11.1 [1106/0571] enabled >PCI: 00:11.2 [1106/3038] disabled >PCI: 00:11.3 [1106/3038] disabled >PCI: 00:11.4 [1106/8235] ops >PCI: 00:11.4 [1106/8235] disabled >PCI: 00:11.5 [1106/3058] disabled >PCI: 00:11.6 [1106/3068] enabled >PCI: devfn 0x8f, bad id 0xffffffff >PCI: 00:12.0 [1106/3065] ops >PCI: 00:12.0 [1106/3065] enabled >PCI: devfn 0x98, bad id 0xffffffff >malloc Enter, size 668, free_mem_ptr 0001829c >malloc 0x0001829c >PCI: 00:14.0 [1106/3065] ops >PCI: 00:14.0 [1106/3065] enabled >PCI: devfn 0xa8, bad id 0xffffffff >PCI: devfn 0xb0, bad id 0xffffffff >PCI: devfn 0xb8, bad id 0xffffffff >PCI: devfn 0xc0, bad id 0xffffffff >PCI: devfn 0xc8, bad id 0xffffffff >PCI: devfn 0xd0, bad id 0xffffffff >PCI: devfn 0xd8, bad id 0xffffffff >PCI: devfn 0xe0, bad id 0xffffffff >PCI: devfn 0xe8, bad id 0xffffffff >PCI: devfn 0xf0, bad id 0xffffffff >PCI: devfn 0xf8, bad id 0xffffffff >do_pci_scan_bridge for PCI: 00:01.0 >PCI: pci_scan_bus for bus 01 >PCI: devfn 0x0, bad id 0xffffffff >PCI: devfn 0x8, bad id 0xffffffff >PCI: devfn 0x10, bad id 0xffffffff >PCI: devfn 0x18, bad id 0xffffffff >PCI: devfn 0x20, bad id 0xffffffff >PCI: devfn 0x28, bad id 0xffffffff >PCI: devfn 0x30, bad id 0xffffffff >PCI: devfn 0x38, bad id 0xffffffff >PCI: devfn 0x40, bad id 0xffffffff >PCI: devfn 0x48, bad id 0xffffffff >PCI: devfn 0x50, bad id 0xffffffff >PCI: devfn 0x58, bad id 0xffffffff >PCI: devfn 0x60, bad id 0xffffffff >PCI: devfn 0x68, bad id 0xffffffff >PCI: devfn 0x70, bad id 0xffffffff >PCI: devfn 0x78, bad id 0xffffffff >PCI: devfn 0x80, bad id 0xffffffff >PCI: devfn 0x88, bad id 0xffffffff >PCI: devfn 0x90, bad id 0xffffffff >PCI: devfn 0x98, bad id 0xffffffff >PCI: devfn 0xa0, bad id 0xffffffff >PCI: devfn 0xa8, bad id 0xffffffff >PCI: devfn 0xb0, bad id 0xffffffff >PCI: devfn 0xb8, bad id 0xffffffff >PCI: devfn 0xc0, bad id 0xffffffff >PCI: devfn 0xc8, bad id 0xffffffff >PCI: devfn 0xd0, bad id 0xffffffff >PCI: devfn 0xd8, bad id 0xffffffff >PCI: devfn 0xe0, bad id 0xffffffff >PCI: devfn 0xe8, bad id 0xffffffff >PCI: devfn 0xf0, bad id 0xffffffff >PCI: devfn 0xf8, bad id 0xffffffff >PCI: pci_scan_bus returning with max=001 >do_pci_scan_bridge returns max 1 >scan_static_bus for PCI: 00:11.0 >malloc Enter, size 668, free_mem_ptr 00018538 >malloc 0x00018538 >malloc Enter, size 668, free_mem_ptr 000187d4 >malloc 0x000187d4 >malloc Enter, size 668, free_mem_ptr 00018a70 >malloc 0x00018a70 >malloc Enter, size 668, free_mem_ptr 00018d0c >malloc 0x00018d0c >malloc Enter, size 668, free_mem_ptr 00018fa8 >malloc 0x00018fa8 >malloc Enter, size 668, free_mem_ptr 00019244 >malloc 0x00019244 >malloc Enter, size 668, free_mem_ptr 000194e0 >malloc 0x000194e0 >malloc Enter, size 668, free_mem_ptr 0001977c >malloc 0x0001977c >malloc Enter, size 668, free_mem_ptr 00019a18 >malloc 0x00019a18 >malloc Enter, size 668, free_mem_ptr 00019cb4 >malloc 0x00019cb4 >malloc Enter, size 668, free_mem_ptr 00019f50 >malloc 0x00019f50 >PNP: 002e.0 disabled >PNP: 002e.1 disabled >PNP: 002e.2 enabled >PNP: 002e.3 disabled >PNP: 002e.5 enabled >PNP: 002e.6 disabled >PNP: 002e.7 disabled >PNP: 002e.8 disabled >PNP: 002e.9 disabled >PNP: 002e.a disabled >PNP: 002e.b enabled >PNP: 607a.0 enabled >PNP: 607a.1 enabled >PNP: 607a.2 enabled >PNP: 607a.3 enabled >PNP: 607a.5 enabled >PNP: 607a.6 enabled >PNP: 607a.7 enabled >PNP: 607a.8 enabled >PNP: 607a.9 enabled >PNP: 607a.a enabled >PNP: 607a.b enabled >scan_static_bus for PCI: 00:11.0 done >PCI: pci_scan_bus returning with max=001 >Unexpected Exception: 6 @ 10:e2c3f00a - Halting >Code: 0 eflags: 00010093 >eax: ffffff00 ebx: 00000000 ecx: 000003f8 edx: 00017eec >edi: 00000000 esi: 00000000 ebp: 00000000 esp: 00010004 > > >Any ideas would be great! > >Thanks! >/Thomas > >-- >linuxbios mailing list >[email protected] >http://www.linuxbios.org/mailman/listinfo/linuxbios -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
