Author: uwe
Date: 2007-07-24 01:18:41 +0200 (Tue, 24 Jul 2007)
New Revision: 464
Modified:
LinuxBIOSv3/arch/x86/geodelx/geodelx.c
LinuxBIOSv3/arch/x86/geodelx/stage1.c
LinuxBIOSv3/include/arch/x86/msr.h
LinuxBIOSv3/northbridge/amd/geodelx/geodelx.c
LinuxBIOSv3/northbridge/amd/geodelx/geodelxinit.c
LinuxBIOSv3/northbridge/amd/geodelx/raminit.c
LinuxBIOSv3/southbridge/amd/cs5536/cs5536.c
LinuxBIOSv3/southbridge/amd/cs5536/stage1.c
Log:
Various code cleanups:
- Simplify lots of code, especially msr-related code.
- Move struct msrinit declaration into msr.h as we use it quite often
and there's no use to duplicate it again and again in each file.
- Remove unrequired variable usage (e.g. numEnabled, msrnum, val, port).
- Remove useless comments.
Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
Acked-by: Marc Jones <[EMAIL PROTECTED]>
Modified: LinuxBIOSv3/arch/x86/geodelx/geodelx.c
===================================================================
--- LinuxBIOSv3/arch/x86/geodelx/geodelx.c 2007-07-23 16:49:00 UTC (rev
463)
+++ LinuxBIOSv3/arch/x86/geodelx/geodelx.c 2007-07-23 23:18:41 UTC (rev
464)
@@ -255,6 +255,12 @@
return 33;
}
+static const struct msrinit msr_table[] = {
+ {CPU_BC_MSS_ARRAY_CTL0, {.hi = 0x00000000, .lo = 0x2814D352}},
+ {CPU_BC_MSS_ARRAY_CTL1, {.hi = 0x00000000, .lo = 0x1068334D}},
+ {CPU_BC_MSS_ARRAY_CTL2, {.hi = 0x00000106, .lo = 0x83104104}},
+};
+
/**
* Delay Control Settings table from AMD (MCP 0x4C00000F).
*/
@@ -308,44 +314,29 @@
*/
static void set_delay_control(u8 dimm0, u8 dimm1)
{
- u32 msrnum, glspeed;
+ u32 glspeed;
u8 spdbyte0, spdbyte1, dimms, i;
struct msr msr;
glspeed = geode_link_speed();
/* Fix delay controls for DM and IM arrays. */
- msrnum = CPU_BC_MSS_ARRAY_CTL0;
- msr.hi = 0;
- msr.lo = 0x2814D352;
- wrmsr(msrnum, msr);
+ for (i = 0; i < ARRAY_SIZE(msr_table); i++)
+ wrmsr(msr_table[i].msrnum, msr_table[i].msr);
- msrnum = CPU_BC_MSS_ARRAY_CTL1;
- msr.hi = 0;
- msr.lo = 0x1068334D;
- wrmsr(msrnum, msr);
-
- msrnum = CPU_BC_MSS_ARRAY_CTL2;
- msr.hi = 0x00000106;
- msr.lo = 0x83104104;
- wrmsr(msrnum, msr);
-
- msrnum = GLCP_FIFOCTL;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLCP_FIFOCTL);
msr.hi = 0x00000005;
- wrmsr(msrnum, msr);
+ wrmsr(GLCP_FIFOCTL, msr);
/* Enable setting. */
- msrnum = CPU_BC_MSS_ARRAY_CTL_ENA;
msr.hi = 0;
msr.lo = 0x00000001;
- wrmsr(msrnum, msr);
+ wrmsr(CPU_BC_MSS_ARRAY_CTL_ENA, msr);
/* Debug Delay Control setup check.
* Leave it alone if it has been setup. FS2 or something is here.
*/
- msrnum = GLCP_DELAY_CONTROLS;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLCP_DELAY_CONTROLS);
if (msr.lo & ~(DELAY_LOWER_STATUS_MASK))
return;
@@ -409,85 +400,74 @@
*/
void cpu_reg_init(int debug_clock_disable, u8 dimm0, u8 dimm1)
{
- int msrnum;
struct msr msr;
/* Castle 2.0 BTM periodic sync period. */
/* [40:37] 1 sync record per 256 bytes. */
- msrnum = CPU_PF_CONF;
- msr = rdmsr(msrnum);
+ msr = rdmsr(CPU_PF_CONF);
msr.hi |= (0x8 << 5);
- wrmsr(msrnum, msr);
+ wrmsr(CPU_PF_CONF, msr);
/* Castle performance setting.
* Enable Quack for fewer re-RAS on the MC.
*/
- msrnum = GLIU0_ARB;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLIU0_ARB);
msr.hi &= ~ARB_UPPER_DACK_EN_SET;
msr.hi |= ARB_UPPER_QUACK_EN_SET;
- wrmsr(msrnum, msr);
+ wrmsr(GLIU0_ARB, msr);
- msrnum = GLIU1_ARB;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLIU1_ARB);
msr.hi &= ~ARB_UPPER_DACK_EN_SET;
msr.hi |= ARB_UPPER_QUACK_EN_SET;
- wrmsr(msrnum, msr);
+ wrmsr(GLIU1_ARB, msr);
/* GLIU port active enable, limit south pole masters (AES and PCI) to
* one outstanding transaction.
*/
- msrnum = GLIU1_PORT_ACTIVE;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLIU1_PORT_ACTIVE);
msr.lo &= ~0x880;
- wrmsr(msrnum, msr);
+ wrmsr(GLIU1_PORT_ACTIVE, msr);
/* Set the Delay Control in GLCP. */
set_delay_control(dimm0, dimm1);
/* Enable RSDC. */
- msrnum = CPU_AC_SMM_CTL;
- msr = rdmsr(msrnum);
+ msr = rdmsr(CPU_AC_SMM_CTL);
msr.lo |= SMM_INST_EN_SET;
- wrmsr(msrnum, msr);
+ wrmsr(CPU_AC_SMM_CTL, msr);
/* FPU imprecise exceptions bit. */
- msrnum = CPU_FPU_MSR_MODE;
- msr = rdmsr(msrnum);
+ msr = rdmsr(CPU_FPU_MSR_MODE);
msr.lo |= FPU_IE_SET;
- wrmsr(msrnum, msr);
+ wrmsr(CPU_FPU_MSR_MODE, msr);
/* Power savers (do after BIST). */
/* Enable Suspend on HLT & PAUSE instructions. */
- msrnum = CPU_XC_CONFIG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(CPU_XC_CONFIG);
msr.lo |= XC_CONFIG_SUSP_ON_HLT | XC_CONFIG_SUSP_ON_PAUSE;
- wrmsr(msrnum, msr);
+ wrmsr(CPU_XC_CONFIG, msr);
/* Enable SUSP and allow TSC to run in Suspend (keep speed
* detection happy).
*/
- msrnum = CPU_BC_CONF_0;
- msr = rdmsr(msrnum);
+ msr = rdmsr(CPU_BC_CONF_0);
msr.lo |= TSC_SUSP_SET | SUSP_EN_SET;
msr.lo &= 0x0F0FFFFFF;
msr.lo |= 0x002000000; /* PBZ213: Set PAUSEDLY = 2. */
- wrmsr(msrnum, msr);
+ wrmsr(CPU_BC_CONF_0, msr);
/* Disable the debug clock to save power. */
/* Note: Leave it enabled for FS2 debug. */
if (debug_clock_disable && 0) {
- msrnum = GLCP_DBGCLKCTL;
msr.hi = 0;
msr.lo = 0;
- wrmsr(msrnum, msr);
+ wrmsr(GLCP_DBGCLKCTL, msr);
}
/* Setup throttling delays to proper mode if it is ever enabled. */
- msrnum = GLCP_TH_OD;
msr.hi = 0;
msr.lo = 0x00000603C;
- wrmsr(msrnum, msr);
+ wrmsr(GLCP_TH_OD, msr);
/* Fix CPU bugs. */
#warning testing fixing bugs in initram
Modified: LinuxBIOSv3/arch/x86/geodelx/stage1.c
===================================================================
--- LinuxBIOSv3/arch/x86/geodelx/stage1.c 2007-07-23 16:49:00 UTC (rev
463)
+++ LinuxBIOSv3/arch/x86/geodelx/stage1.c 2007-07-23 23:18:41 UTC (rev
464)
@@ -23,10 +23,7 @@
#include <msr.h>
#include <amd_geodelx.h>
-static const struct msrinit {
- u32 msrnum;
- struct msr msr;
-} msr_table[] = {
+static const struct msrinit msr_table[] = {
/* Setup access to cache under 1MB. */
{CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, // 0x00000-0xA0000
{CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, // 0xA0000-0xBFFFF
@@ -43,17 +40,18 @@
};
/**
- * Set up Geode LX registers for sane behaviour.
- */
+ * Set up Geode LX registers for sane behaviour.
+ */
void geodelx_msr_init(void)
{
}
/**
- * Disable Cache As RAM(CAR) after memory is setup.
- * Geode can write back the cache contents to RAM and continue on.
- * Assumes that anything in the cache was under 1MB.
- */
+ * Disable Cache As RAM (CAR) after memory is setup.
+ *
+ * Geode can write back the cache contents to RAM and continue on.
+ * Assumes that anything in the cache was under 1MB.
+ */
void disable_car(void)
{
int i;
Modified: LinuxBIOSv3/include/arch/x86/msr.h
===================================================================
--- LinuxBIOSv3/include/arch/x86/msr.h 2007-07-23 16:49:00 UTC (rev 463)
+++ LinuxBIOSv3/include/arch/x86/msr.h 2007-07-23 23:18:41 UTC (rev 464)
@@ -21,12 +21,16 @@
#define CPU_X86_MSR_H
/* standard MSR operations, everyone has written these one hundred times */
-struct msr
-{
+struct msr {
u32 lo;
u32 hi;
};
+struct msrinit {
+ u32 msrnum;
+ struct msr msr;
+};
+
static inline struct msr rdmsr(u32 index)
{
struct msr result;
Modified: LinuxBIOSv3/northbridge/amd/geodelx/geodelx.c
===================================================================
--- LinuxBIOSv3/northbridge/amd/geodelx/geodelx.c 2007-07-23 16:49:00 UTC
(rev 463)
+++ LinuxBIOSv3/northbridge/amd/geodelx/geodelx.c 2007-07-23 23:18:41 UTC
(rev 464)
@@ -100,10 +100,7 @@
#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
/* TODO: Not used!? */
-static const struct msr_defaults {
- u32 msr_no;
- struct msr msr;
-} msr_defaults[] = {
+static const struct msrinit msr_defaults[] = {
{ 0x1700, {.hi = 0,.lo = IM_QWAIT}},
{ 0x1800, {.hi = DMCF_WRITE_SERIALIZE_REQUEST,
.lo = DMCF_SERIAL_LOAD_MISSES}},
@@ -235,6 +232,7 @@
{
struct resource *resource, *last;
unsigned int link;
+ struct bus *bus;
u8 line;
last = &dev->resource[dev->resources];
@@ -248,7 +246,6 @@
}
for (link = 0; link < dev->links; link++) {
- struct bus *bus;
bus = &dev->link[link];
if (bus->children) {
printk(BIOS_DEBUG,
@@ -402,9 +399,7 @@
unsigned int max)
{
printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __FUNCTION__);
-
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
- return max;
+ return pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
}
/**
Modified: LinuxBIOSv3/northbridge/amd/geodelx/geodelxinit.c
===================================================================
--- LinuxBIOSv3/northbridge/amd/geodelx/geodelxinit.c 2007-07-23 16:49:00 UTC
(rev 463)
+++ LinuxBIOSv3/northbridge/amd/geodelx/geodelxinit.c 2007-07-23 23:18:41 UTC
(rev 464)
@@ -25,6 +25,9 @@
#include <cpu.h>
#include <amd_geodelx.h>
+/* Function prototypes */
+extern int sizeram(void);
+
struct gliutable {
unsigned long desc_name;
unsigned short desc_type;
@@ -80,11 +83,6 @@
static struct gliutable *gliutables[] = { gliu0table, gliu1table, 0 };
-struct msrinit {
- unsigned long msrnum;
- struct msr msr;
-};
-
static struct msrinit clock_gating_default[] = {
{GLIU0_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}},
{MC_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0001}},
@@ -113,8 +111,6 @@
{0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}},
};
-extern int sizeram(void);
-
/**
* Write a GeodeLink MSR.
*
@@ -126,9 +122,8 @@
msr.lo = gl->lo;
msr.hi = gl->hi;
- wrmsr(gl->desc_name, msr); /* MSR - see table above. */
- printk(BIOS_SPEW,
- "%s: MSR 0x%08x, val 0x%08x:0x%08x\n",
+ wrmsr(gl->desc_name, msr);
+ printk(BIOS_SPEW, "%s: MSR 0x%08x, val 0x%08x:0x%08x\n",
__FUNCTION__, gl->desc_name, msr.hi, msr.lo);
}
@@ -179,7 +174,7 @@
sizebytes |= 0x100; /* Start at 1 MB. */
msr.lo = sizebytes;
- wrmsr(gl->desc_name, msr); /* MSR - see table above. */
+ wrmsr(gl->desc_name, msr);
printk(BIOS_DEBUG, "%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__,
gl->desc_name, msr.hi, msr.lo);
}
@@ -210,7 +205,7 @@
msr.lo = SMM_OFFSET << 8;
msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff;
- wrmsr(gl->desc_name, msr); /* MSR - See table above. */
+ wrmsr(gl->desc_name, msr);
printk(BIOS_DEBUG, "%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__,
gl->desc_name, msr.hi, msr.lo);
}
@@ -232,7 +227,7 @@
msr.lo = (SMM_OFFSET << 8) & 0xFFF00000;
msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff;
- wrmsr(gl->desc_name, msr); /* MSR - See table above. */
+ wrmsr(gl->desc_name, msr);
printk(BIOS_DEBUG, "%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__,
gl->desc_name, msr.hi, msr.lo);
}
@@ -280,16 +275,16 @@
{
struct gliutable *gl = NULL;
struct msr msr;
- int i, msrnum, enable_preempt, enable_cpu_override;
+ int i, enable_preempt, enable_cpu_override;
int nic_grants_control, enable_bus_parking;
+ unsigned long pah, pal;
/* R0 - GLPCI settings for Conventional Memory space. */
msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */
msr.lo = 0; /* 0 */
msr.lo |= GLPCI_RC_LOWER_EN_SET + GLPCI_RC_LOWER_PF_SET +
GLPCI_RC_LOWER_WC_SET;
- msrnum = GLPCI_RC0;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_RC0, msr);
/* R1 - GLPCI settings for SysMem space. */
/* Get systop from GLIU0 SYSTOP Descriptor. */
@@ -299,10 +294,9 @@
break;
}
}
+
if (gl) {
- unsigned long pah, pal;
- msrnum = gl->desc_name;
- msr = rdmsr(msrnum);
+ msr = rdmsr(gl->desc_name);
/* Example: R_SYSMEM value 20:00:00:0f:fb:f0:01:00
* translates to a base of 0x00100000 and top of 0xffbf0000
@@ -327,8 +321,7 @@
printk(BIOS_DEBUG,
"GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n",
msr.lo, msr.hi);
- msrnum = GLPCI_RC1;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_RC1, msr);
}
/* R2 - GLPCI settings for SMM space. */
@@ -338,8 +331,7 @@
msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET;
printk(BIOS_DEBUG, "GLPCI R2: system msr.lo 0x%08x msr.hi 0x%08x\n",
msr.lo, msr.hi);
- msrnum = GLPCI_RC2;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_RC2, msr);
/* This is done elsewhere already, but it does no harm to do
* it more than once.
@@ -349,41 +341,25 @@
*/
msr.lo = 0x021212121; /* Cache disabled and write serialized. */
msr.hi = 0x021212121; /* Cache disabled and write serialized. */
+ wrmsr(CPU_RCONF_A0_BF, msr);
+ wrmsr(CPU_RCONF_C0_DF, msr);
+ wrmsr(CPU_RCONF_E0_FF, msr);
- msrnum = CPU_RCONF_A0_BF;
- wrmsr(msrnum, msr);
-
- msrnum = CPU_RCONF_C0_DF;
- wrmsr(msrnum, msr);
-
- msrnum = CPU_RCONF_E0_FF;
- wrmsr(msrnum, msr);
-
/* Set Non-Cacheable Read Only for NorthBound Transactions to
* Memory. The Enable bit is handled in the Shadow setup.
*/
- msrnum = GLPCI_A0_BF;
- msr.hi = 0x35353535;
msr.lo = 0x35353535;
- wrmsr(msrnum, msr);
-
- msrnum = GLPCI_C0_DF;
msr.hi = 0x35353535;
- msr.lo = 0x35353535;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_A0_BF, msr);
+ wrmsr(GLPCI_C0_DF, msr);
+ wrmsr(GLPCI_E0_FF, msr);
- msrnum = GLPCI_E0_FF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
- wrmsr(msrnum, msr);
-
/* Set WSREQ. */
- msrnum = CPU_DM_CONFIG0;
- msr = rdmsr(msrnum);
+ msr = rdmsr(CPU_DM_CONFIG0);
msr.hi &= ~(7 << DM_CONFIG0_UPPER_WSREQ_SHIFT);
/* Reduce to 1 for safe mode. */
msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT;
- wrmsr(msrnum, msr);
+ wrmsr(CPU_DM_CONFIG0, msr);
/* The following settings will not work with a CS5530 southbridge.
* We are ignoring the CS5530 case for now, and perhaps forever.
@@ -392,28 +368,22 @@
/* 553x NB Init */
/* Arbiter setup */
- enable_preempt =
- GLPCI_ARB_LOWER_PRE0_SET | GLPCI_ARB_LOWER_PRE1_SET |
- GLPCI_ARB_LOWER_PRE2_SET | GLPCI_ARB_LOWER_CPRE_SET;
+ enable_preempt = GLPCI_ARB_LOWER_PRE0_SET | GLPCI_ARB_LOWER_PRE1_SET |
+ GLPCI_ARB_LOWER_PRE2_SET | GLPCI_ARB_LOWER_CPRE_SET;
enable_cpu_override = GLPCI_ARB_LOWER_COV_SET;
enable_bus_parking = GLPCI_ARB_LOWER_PARK_SET;
- nic_grants_control =
- (0x4 << GLPCI_ARB_UPPER_R2_SHIFT) | (0x3 <<
- GLPCI_ARB_UPPER_H2_SHIFT);
+ nic_grants_control = (0x4 << GLPCI_ARB_UPPER_R2_SHIFT) |
+ (0x3 << GLPCI_ARB_UPPER_H2_SHIFT);
- msrnum = GLPCI_ARB;
- msr = rdmsr(msrnum);
-
+ msr = rdmsr(GLPCI_ARB);
msr.hi |= nic_grants_control;
msr.lo |= enable_cpu_override | enable_preempt | enable_bus_parking;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_ARB, msr);
- msrnum = GLPCI_CTRL;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLPCI_CTRL);
/* Out will be disabled in CPUBUG649 for < 2.0 parts. */
msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET |
- GLPCI_CTRL_LOWER_PCD_SET;
- msr.lo |= GLPCI_CTRL_LOWER_LDE_SET;
+ GLPCI_CTRL_LOWER_PCD_SET | GLPCI_CTRL_LOWER_LDE_SET;
msr.lo &= ~(0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT);
msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT;
@@ -435,24 +405,21 @@
msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT);
msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_CTRL, msr);
/* Set GLPCI Latency Timer */
- msrnum = GLPCI_CTRL;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLPCI_CTRL);
/* Change once 1.x is gone. */
msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_CTRL, msr);
/* GLPCI_SPARE */
- msrnum = GLPCI_SPARE;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLPCI_SPARE);
msr.lo &= ~0x7;
- msr.lo |=
- GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET |
- GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET |
- GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
- wrmsr(msrnum, msr);
+ msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET |
+ GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET |
+ GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
+ wrmsr(GLPCI_SPARE, msr);
}
/**
@@ -462,14 +429,12 @@
{
struct msr msr;
struct msrinit *gating = clock_gating_default;
- int i;
- for (i = 0; gating->msrnum != 0xffffffff; i++) {
+ for (/* Nothing */; gating->msrnum != 0xffffffff; gating++) {
msr = rdmsr(gating->msrnum);
msr.hi |= gating->msr.hi;
msr.lo |= gating->msr.lo;
- wrmsr(gating->msrnum, msr); /* MSR - See table above. */
- gating += 1;
+ wrmsr(gating->msrnum, msr);
}
}
@@ -480,15 +445,13 @@
{
struct msr msr;
struct msrinit *prio = geode_link_priority_table;
- int i;
- for (i = 0; prio->msrnum != 0xffffffff; i++) {
+ for (/* Nothing */; prio->msrnum != 0xffffffff; prio++) {
msr = rdmsr(prio->msrnum);
msr.hi |= prio->msr.hi;
msr.lo &= ~0xfff;
msr.lo |= prio->msr.lo;
- wrmsr(prio->msrnum, msr); /* MSR - See table above. */
- prio += 1;
+ wrmsr(prio->msrnum, msr);
}
}
@@ -523,6 +486,7 @@
int bit;
u8 shadowByte;
struct msr msr = { 0, 0 };
+
shadowByte = (u8) (shadowLo >> 16);
/* Load up D000 settings in edx. */
@@ -614,7 +578,6 @@
msr.hi &= 0xFFFF0000;
msr.hi |=
((u32) (shadowSettings >> 32)) & 0x0000FFFF;
- /* MSR - See the table above. */
wrmsr(pTable->desc_name, msr);
}
}
@@ -661,8 +624,8 @@
*/
static void enable_L1_cache(void)
{
- struct gliutable *gl = NULL;
int i;
+ struct gliutable *gl = NULL;
struct msr msr;
u8 SysMemCacheProp;
@@ -678,7 +641,6 @@
while (1); /* TODO: Should be hlt()? */
}
-// sysdescfound:
msr = rdmsr(gl->desc_name);
/* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the
@@ -806,7 +768,7 @@
if (gl) {
msr = rdmsr(gl->desc_name);
systop = ((msr.hi & 0xFF) << 24) | ((msr.lo & 0xFFF00000) >> 8);
- systop += 0x1000; /* 4K */
+ systop += 4 * 1024; /* 4K */
} else {
systop =
((sizeram() - CONFIG_VIDEO_MB) * 1024) - SMM_SIZE - 1024;
@@ -824,7 +786,6 @@
void northbridge_init_early(void)
{
int i;
- struct msr msr;
printk(BIOS_DEBUG, "Enter %s\n", __FUNCTION__);
Modified: LinuxBIOSv3/northbridge/amd/geodelx/raminit.c
===================================================================
--- LinuxBIOSv3/northbridge/amd/geodelx/raminit.c 2007-07-23 16:49:00 UTC
(rev 463)
+++ LinuxBIOSv3/northbridge/amd/geodelx/raminit.c 2007-07-23 23:18:41 UTC
(rev 464)
@@ -80,14 +80,17 @@
/* Size = Module Density * Module Banks */
dimm_size = smbus_read_byte(dimm, SPD_BANK_DENSITY);
+
/* Align so 1 GB (bit 0) is bit 8. This is a little weird to get gcc
* to not optimize this out.
*/
dimm_size |= (dimm_size << 8);
+
/* And off 2 GB DIMM size: not supported and the 1 GB size we just
* moved up to bit 8 as well as all the extra on top.
*/
dimm_size &= 0x01FC;
+
/* Module Density * Module Banks */
/* Shift to multiply by the number of DIMM banks. */
dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1;
@@ -130,11 +133,11 @@
post_code(ERROR_SET_PAGE);
hlt();
}
+
spd_byte -= 7;
/* If the value is above 6 it means >12 address lines... */
- if (spd_byte > 5) {
+ if (spd_byte > 5)
spd_byte = 7; /* ...which means >32k so set to disabled. */
- }
/* 0 = 1k, 1 = 2k, 2 = 4k, etc. */
dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT;
@@ -181,9 +184,8 @@
#endif
/* Use the slowest DIMM. */
- if (spd_byte0 < spd_byte1) {
+ if (spd_byte0 < spd_byte1)
spd_byte0 = spd_byte1;
- }
/* Turn SPD ns time into MHz. Check what the asm does to this math. */
speed = 2 * ((10000 / (((spd_byte0 >> 4) * 10) + (spd_byte0 & 0x0F))));
@@ -214,22 +216,19 @@
spd_byte0 = smbus_read_byte(dimm0, SPD_REFRESH);
spd_byte0 &= 0xF;
- if (spd_byte0 > 5) {
+ if (spd_byte0 > 5)
spd_byte0 = 5;
- }
rate0 = REFRESH_RATE[spd_byte0];
spd_byte1 = smbus_read_byte(dimm1, SPD_REFRESH);
spd_byte1 &= 0xF;
- if (spd_byte1 > 5) {
+ if (spd_byte1 > 5)
spd_byte1 = 5;
- }
rate1 = REFRESH_RATE[spd_byte1];
/* Use the faster rate (lowest number). */
- if (rate0 > rate1) {
+ if (rate0 > rate1)
rate0 = rate1;
- }
msr = rdmsr(MC_CF07_DATA);
msr.lo |= ((rate0 * (geode_link_speed() / 2)) / 16)
@@ -488,14 +487,10 @@
spd_byte1 &= spd_byte0;
msr = rdmsr(MC_CF07_DATA);
- if (spd_byte1 & 1) {
- /* Drive Strength Control */
- msr.lo |= CF07_LOWER_EMR_DRV_SET;
- }
- if (spd_byte1 & 2) {
- /* FET Control */
- msr.lo |= CF07_LOWER_EMR_QFC_SET;
- }
+ if (spd_byte1 & 1)
+ msr.lo |= CF07_LOWER_EMR_DRV_SET; /* Drive Strength Control */
+ if (spd_byte1 & 2)
+ msr.lo |= CF07_LOWER_EMR_QFC_SET; /* FET Control */
wrmsr(MC_CF07_DATA, msr);
}
@@ -508,15 +503,13 @@
msr = rdmsr(GLCP_DELAY_CONTROLS);
msr.hi &= ~(7 << 20); /* Clear bits 54:52. */
- if (geode_link_speed() < 200) {
+ if (geode_link_speed() < 200)
msr.hi |= 2 << 20;
- }
wrmsr(GLCP_DELAY_CONTROLS, msr);
msr = rdmsr(MC_CFCLK_DBUG);
- msr.hi |=
- CFCLK_UPPER_MTST_B2B_DIS_SET | CFCLK_UPPER_MTEST_EN_SET |
- CFCLK_UPPER_MTST_RBEX_EN_SET;
+ msr.hi |= CFCLK_UPPER_MTST_B2B_DIS_SET | CFCLK_UPPER_MTEST_EN_SET |
+ CFCLK_UPPER_MTST_RBEX_EN_SET;
msr.lo |= CFCLK_LOWER_TRISTATE_DIS_SET;
wrmsr(MC_CFCLK_DBUG, msr);
@@ -530,32 +523,27 @@
void sdram_set_registers(void)
{
struct msr msr;
- u32 msrnum;
/* Set Timing Control */
- msrnum = MC_CF1017_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF1017_DATA);
msr.lo &= ~(7 << CF1017_LOWER_RD_TMG_CTL_SHIFT);
- if (geode_link_speed() < 334) {
+ if (geode_link_speed() < 334)
msr.lo |= (3 << CF1017_LOWER_RD_TMG_CTL_SHIFT);
- } else {
+ else
msr.lo |= (4 << CF1017_LOWER_RD_TMG_CTL_SHIFT);
- }
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF1017_DATA, msr);
/* Set Refresh Staggering */
- msrnum = MC_CF07_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF07_DATA);
msr.lo &= ~0xF0;
msr.lo |= 0x40; /* Set refresh to 4 SDRAM clocks. */
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
/* Memory Interleave: Set HOI here otherwise default is LOI. */
#if 0
- msrnum = MC_CF8F_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF8F_DATA);
msr.hi |= CF8F_UPPER_HOI_LOI_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF8F_DATA, msr);
#endif
}
@@ -636,7 +624,7 @@
*/
void sdram_enable(u8 dimm0, u8 dimm1)
{
- u32 i, msrnum;
+ u32 i;
struct msr msr;
post_code(POST_MEM_ENABLE);
@@ -658,38 +646,33 @@
}
/* Set CKEs. */
- msrnum = MC_CFCLK_DBUG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CFCLK_DBUG);
msr.lo &= ~(CFCLK_LOWER_MASK_CKE_SET0 | CFCLK_LOWER_MASK_CKE_SET1);
- wrmsr(msrnum, msr);
+ wrmsr(MC_CFCLK_DBUG, msr);
/* Force Precharge All on next command, EMRS. */
- msrnum = MC_CFCLK_DBUG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CFCLK_DBUG);
msr.lo |= CFCLK_LOWER_FORCE_PRE_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CFCLK_DBUG, msr);
/* EMRS to enable DLL (pre-setup done in setExtendedModeRegisters). */
- msrnum = MC_CF07_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF07_DATA);
msr.lo |= CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DDR_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~(CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DDR_SET);
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
/* Clear Force Precharge All. */
- msrnum = MC_CFCLK_DBUG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CFCLK_DBUG);
msr.lo &= ~CFCLK_LOWER_FORCE_PRE_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CFCLK_DBUG, msr);
/* MRS Reset DLL - set. */
- msrnum = MC_CF07_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF07_DATA);
msr.lo |= CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DLL_RESET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~(CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DLL_RESET);
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
/* 2us delay (200 clocks @ 200Mhz). We probably really don't need
* this but... better safe.
@@ -701,59 +684,52 @@
while (!(~inb(0x61)));
/* Force Precharge All on the next command, auto-refresh. */
- msrnum = MC_CFCLK_DBUG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CFCLK_DBUG);
msr.lo |= CFCLK_LOWER_FORCE_PRE_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CFCLK_DBUG, msr);
/* Manually AUTO refresh #1. If auto refresh was not enabled above we
* would need to do 8 refreshes to prime the pump before these 2.
*/
- msrnum = MC_CF07_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF07_DATA);
msr.lo |= CF07_LOWER_REF_TEST_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~CF07_LOWER_REF_TEST_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
/* Clear Force Precharge All. */
- msrnum = MC_CFCLK_DBUG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CFCLK_DBUG);
msr.lo &= ~CFCLK_LOWER_FORCE_PRE_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CFCLK_DBUG, msr);
/* Manually AUTO refresh.
* The MC should insert the right delay between the refreshes.
*/
- msrnum = MC_CF07_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF07_DATA);
msr.lo |= CF07_LOWER_REF_TEST_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~CF07_LOWER_REF_TEST_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
/* MRS Reset DLL - clear. */
- msrnum = MC_CF07_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF07_DATA);
msr.lo |= CF07_LOWER_PROG_DRAM_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~CF07_LOWER_PROG_DRAM_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF07_DATA, msr);
/* Allow MC to tristate during idle cycles with MTEST OFF. */
- msrnum = MC_CFCLK_DBUG;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CFCLK_DBUG);
msr.lo &= ~CFCLK_LOWER_TRISTATE_DIS_SET;
- wrmsr(msrnum, msr);
+ wrmsr(MC_CFCLK_DBUG, msr);
/* Disable SDCLK DIMM 1 slot if no DIMM installed (to save power). */
msr = rdmsr(MC_CF07_DATA);
if ((msr.hi & (7 << CF07_UPPER_D1_PSZ_SHIFT)) ==
(7 << CF07_UPPER_D1_PSZ_SHIFT)) {
- msrnum = GLCP_DELAY_CONTROLS;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLCP_DELAY_CONTROLS);
msr.hi |= (1 << 23); /* SDCLK bit for 2.0 */
- wrmsr(msrnum, msr);
+ wrmsr(GLCP_DELAY_CONTROLS, msr);
}
/* Set PMode0 Sensitivity Counter. */
@@ -762,10 +738,9 @@
wrmsr(MC_CF_PMCTR, msr);
/* Set PMode1 Up delay enable. */
- msrnum = MC_CF1017_DATA;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MC_CF1017_DATA);
msr.lo |= (209 << 8); /* bits[15:8] = 209 */
- wrmsr(msrnum, msr);
+ wrmsr(MC_CF1017_DATA, msr);
printk(BIOS_DEBUG, "DRAM controller init done.\n");
post_code(POST_MEM_SETUP_GOOD);
@@ -786,8 +761,7 @@
* Check for failed DLL settings now that we have done a
* memory write.
*/
- msrnum = GLCP_DELAY_CONTROLS;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLCP_DELAY_CONTROLS);
if ((msr.lo & 0x7FF) == 0x104) {
/* If you had it you would need to clear out the fail boot
* count flag (depending on where it counts from etc).
@@ -799,10 +773,9 @@
*/
/* Reset the system. */
- msrnum = MDD_SOFT_RESET;
- msr = rdmsr(msrnum);
+ msr = rdmsr(MDD_SOFT_RESET);
msr.lo |= 1;
- wrmsr(msrnum, msr);
+ wrmsr(MDD_SOFT_RESET, msr);
}
printk(BIOS_DEBUG, "RAM DLL lock\n");
Modified: LinuxBIOSv3/southbridge/amd/cs5536/cs5536.c
===================================================================
--- LinuxBIOSv3/southbridge/amd/cs5536/cs5536.c 2007-07-23 16:49:00 UTC (rev
463)
+++ LinuxBIOSv3/southbridge/amd/cs5536/cs5536.c 2007-07-23 23:18:41 UTC (rev
464)
@@ -29,13 +29,8 @@
#include <statictree.h>
#include "cs5536.h"
-struct msrinit {
- u32 msrnum;
- struct msr msr;
-};
-
/* Master configuration register for bus masters */
-static struct msrinit SB_MASTER_CONF_TABLE[] = {
+static const struct msrinit SB_MASTER_CONF_TABLE[] = {
{USB2_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00008f000}},
{ATA_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00048f000}},
{AC97_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00008f000}},
@@ -44,7 +39,7 @@
};
/* CS5536 clock gating */
-static struct msrinit CS5536_CLOCK_GATING_TABLE[] = {
+static const struct msrinit CS5536_CLOCK_GATING_TABLE[] = {
{GLIU_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000004}},
{GLPCI_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000005}},
{GLCP_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000004}},
@@ -99,32 +94,18 @@
*/
static void pm_chipset_init(void)
{
- u32 val = 0;
- u16 port;
+ outl(0x0E00, PMS_IO_BASE + 0x010); /* 1ms */
- port = (PMS_IO_BASE + 0x010);
- val = 0x0E00; /* 1ms */
- outl(val, port);
-
- /* PM_WKXD */
/* Make sure bits[3:0]=0000b to clear the saved Sx state. */
- port = (PMS_IO_BASE + PM_WKXD);
- val = 0x0A0; /* 5ms */
- outl(val, port);
+ outl(0x00A0, PMS_IO_BASE + PM_WKXD); /* 5ms */
- /* PM_WKD */
- port = (PMS_IO_BASE + PM_WKD);
- outl(val, port);
+ outl(0x00A0, PMS_IO_BASE + PM_WKD);
- /* PM_SED */
- port = (PMS_IO_BASE + PM_SED);
- val = 0x04601; /* 5ms, # of 3.57954MHz clock edges */
- outl(val, port);
+ /* 5ms, # of 3.57954MHz clock edges */
+ outl(0x4601, PMS_IO_BASE + PM_SED);
- /* PM_SIDD */
- port = (PMS_IO_BASE + PM_SIDD);
- val = 0x08C02; /* 10ms, # of 3.57954MHz clock edges */
- outl(val, port);
+ /* 10ms, # of 3.57954MHz clock edges */
+ outl(0x8C02, PMS_IO_BASE + PM_SIDD);
}
/**
@@ -136,7 +117,6 @@
{
int i;
struct msr msr;
- int numEnabled = 0;
printk(BIOS_DEBUG, "chipset_flash_setup: Start\n");
for (i = 0; i < ARRAY_SIZE(FlashInitTable); i++) {
@@ -164,9 +144,6 @@
printk(BIOS_DEBUG, "MSR(0x%08X, %08X_%08X)\n",
MDD_NORF_CNTRL, msr.hi, msr.lo);
wrmsr(MDD_NORF_CNTRL, msr);
-
- /* Update the number enabled. */
- numEnabled++;
}
}
printk(BIOS_DEBUG, "chipset_flash_setup: Finish\n");
@@ -253,6 +230,7 @@
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_ISA, 0);
+
gpio_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1);
gpio_addr &= ~1; /* Clear I/O bit */
printk(BIOS_DEBUG, "GPIO_ADDR: %08X\n", gpio_addr);
@@ -440,16 +418,14 @@
*(bar + UOCMUX) &= PUEN_SET;
/* Host or Device? */
- if (sb->enable_USBP4_device) {
+ if (sb->enable_USBP4_device)
*(bar + UOCMUX) |= PMUX_DEVICE;
- } else {
+ else
*(bar + UOCMUX) |= PMUX_HOST;
- }
/* Overcurrent configuration */
- if (sb->enable_USBP4_overcurrent) {
+ if (sb->enable_USBP4_overcurrent)
*(bar + UOCCAP) |= sb->enable_USBP4_overcurrent;
- }
}
/* PBz#6466: If the UOC(OTG) device, port 4, is configured as a
@@ -478,15 +454,13 @@
/* Disable virtual PCI UDC and OTG headers. */
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_UDC, 0);
- if (dev) {
+ if (dev)
pci_write_config32(dev, 0x7C, 0xDEADBEEF);
- }
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_OTG, 0);
- if (dev) {
+ if (dev)
pci_write_config32(dev, 0x7C, 0xDEADBEEF);
- }
}
/**
@@ -502,9 +476,8 @@
{
struct device *dev;
struct msr msr;
- u32 msrnum;
struct southbridge_amd_cs5536_config *sb;
- struct msrinit *csi;
+ const struct msrinit *csi;
post_code(P80_CHIPSET_INIT);
dev = dev_find_device(PCI_VENDOR_ID_AMD,
@@ -520,7 +493,7 @@
if (!IsS3Resume())
{
struct acpi_init *aci = acpi_init_table;
- for (; aci->ioreg; aci++) {
+ for (/* Nothing */; aci->ioreg; aci++) {
outl(aci->regdata, aci->ioreg);
inl(aci->ioreg);
}
@@ -535,22 +508,20 @@
/* Allow I/O reads and writes during a ATA DMA operation. This could
* be done in the HD ROM but do it here for easier debugging.
*/
- msrnum = ATA_SB_GLD_MSR_ERR;
- msr = rdmsr(msrnum);
+ msr = rdmsr(ATA_SB_GLD_MSR_ERR);
msr.lo &= ~0x100;
- wrmsr(msrnum, msr);
+ wrmsr(ATA_SB_GLD_MSR_ERR, msr);
/* Enable post primary IDE. */
- msrnum = GLPCI_SB_CTRL;
- msr = rdmsr(msrnum);
+ msr = rdmsr(GLPCI_SB_CTRL);
msr.lo |= GLPCI_CRTL_PPIDE_SET;
- wrmsr(msrnum, msr);
+ wrmsr(GLPCI_SB_CTRL, msr);
csi = SB_MASTER_CONF_TABLE;
for (/* Nothing */; csi->msrnum; csi++) {
msr.lo = csi->msr.lo;
msr.hi = csi->msr.hi;
- wrmsr(csi->msrnum, msr); /* MSR - see table above */
+ wrmsr(csi->msrnum, msr);
}
/* Flash BAR size setup. */
@@ -566,7 +537,7 @@
for (/* Nothing */; csi->msrnum; csi++) {
msr.lo = csi->msr.lo;
msr.hi = csi->msr.hi;
- wrmsr(csi->msrnum, msr); /* MSR - see table above */
+ wrmsr(csi->msrnum, msr);
}
}
}
@@ -601,9 +572,8 @@
printk(BIOS_ERR, "cs5536: %s: enable_ide_nand_flash is %d\n",
__FUNCTION__, sb->enable_ide_nand_flash);
- if (sb->enable_ide_nand_flash == 1) {
+ if (sb->enable_ide_nand_flash == 1)
enable_ide_nand_flash_header();
- }
enable_USB_port4(sb);
@@ -633,8 +603,7 @@
*/
static void cs5536_pci_dev_enable_resources(struct device *dev)
{
- /* TODO: Shouldn't this be BIOS_SPEW? */
- printk(BIOS_ERR, "cs5536: %s()\n", __FUNCTION__);
+ printk(BIOS_SPEW, "cs5536: %s()\n", __FUNCTION__);
pci_dev_enable_resources(dev);
enable_childrens_resources(dev);
}
Modified: LinuxBIOSv3/southbridge/amd/cs5536/stage1.c
===================================================================
--- LinuxBIOSv3/southbridge/amd/cs5536/stage1.c 2007-07-23 16:49:00 UTC (rev
463)
+++ LinuxBIOSv3/southbridge/amd/cs5536/stage1.c 2007-07-23 23:18:41 UTC (rev
464)
@@ -19,6 +19,7 @@
#include <types.h>
#include <msr.h>
+#include <lib.h>
#include <amd_geodelx.h>
#include "cs5536.h"
@@ -43,7 +44,7 @@
struct msr msr;
/* Forward MSR access to CS5536_GLINK_PORT_NUM to CS5536_DEV_NUM. */
- msr.hi = msr.lo = 0x00000000;
+ msr.hi = msr.lo = 0;
/* TODO: unsigned char -> u8? */
#if CS5536_GLINK_PORT_NUM <= 4
@@ -88,6 +89,14 @@
}
}
+static const struct msrinit msr_table[] = {
+ {MDD_LBAR_SMB, {.hi = 0x0000f001, .lo = SMBUS_IO_BASE}},
+ {MDD_LBAR_GPIO, {.hi = 0x0000f001, .lo = GPIO_IO_BASE}},
+ {MDD_LBAR_MFGPT, {.hi = 0x0000f001, .lo = MFGPT_IO_BASE}},
+ {MDD_LBAR_ACPI, {.hi = 0x0000f001, .lo = ACPI_IO_BASE}},
+ {MDD_LBAR_PMS, {.hi = 0x0000f001, .lo = PMS_IO_BASE}},
+};
+
/**
* Set up I/O bases for SMBus, GPIO, MFGPT, ACPI, and PM.
*
@@ -97,32 +106,10 @@
*/
static void cs5536_setup_iobase(void)
{
- struct msr msr;
+ int i;
- /* Setup LBAR for SMBus controller. */
- msr.hi = 0x0000f001;
- msr.lo = SMBUS_IO_BASE;
- wrmsr(MDD_LBAR_SMB, msr);
-
- /* Setup LBAR for GPIO. */
- msr.hi = 0x0000f001;
- msr.lo = GPIO_IO_BASE;
- wrmsr(MDD_LBAR_GPIO, msr);
-
- /* Setup LBAR for MFGPT. */
- msr.hi = 0x0000f001;
- msr.lo = MFGPT_IO_BASE;
- wrmsr(MDD_LBAR_MFGPT, msr);
-
- /* Setup LBAR for ACPI. */
- msr.hi = 0x0000f001;
- msr.lo = ACPI_IO_BASE;
- wrmsr(MDD_LBAR_ACPI, msr);
-
- /* Setup LBAR for PM support. */
- msr.hi = 0x0000f001;
- msr.lo = PMS_IO_BASE;
- wrmsr(MDD_LBAR_PMS, msr);
+ for (i = 0; i < ARRAY_SIZE(msr_table); i++)
+ wrmsr(msr_table[i].msrnum, msr_table[i].msr);
}
/**
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
