Quoting Myles Watson <[EMAIL PROTECTED]>:
>
>
>> > static int spd_read_byte(unsigned device, unsigned address)
>> > {
>> > int i;
>> >
>> > if (device == 0x50){
>> > return do_smbus_read_byte(device, address);
>> > } else if (device == 0x51){
>> > for (i=0; i < (sizeof spd_table/sizeof spd_table[0]); i++){
>> > if (spd_table[i].address == address){
>> > return spd_table[i].data;
>> > }
>> > }
> return 0xFF; /* This line returns 0xFF when address not found */
>> > } else {
>> > return 0xFF; /* returns 0xFF on any failures */
>> > }
>> > }
>
Hmm, This isn't working. In raminit.c the spd_read_byte() uses
ctrl->channel0[i] not device (0x51). Example:
smbus_read_byte(ctrl->channel0[i], 2)
I will have to investigate what this tranlates to. Does anyone know
off the top of their head what ctrl->channel0[i] translates to?
Thanks - Joe
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
