Steffen D. wrote: > Dear Mailinglist, > > im trying to build a bios for GeodeLX cpu. I have a development board > from LogicPC. Afaik this is the same board that was used for the > development for OLCP. > I try it with the svn version Linuxbios-3. I have made a image with make > menuconfig and configured everything cleary for the geodelx board. I > flash the rom with windows and a galep 5 flash device. > Im very sure that the flashing works because i can clone the bios which > comes with the board. > > I dont get any output over rs232. > > Im using SST 49LF004B roms with 4mbit. Maybe here is the problem? I have > made linuxbios.rom with a target size of 2mb. I also tryed "cat > linuxbios.rom linuxbios.rom > linuxbios4m.rom". I found this hin here in > the ml. > > Every help is welcome! > > Regards, > > Steffen >
Steffen, Use linuxBIOS v2 and buildrom to build GeodeLX platforms. Start with the amd/norwich or amd/db800 mainboards. Marc -- Marc Jones Senior Firmware Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
