On Thu, Sep 20, 2007 at 08:57:39AM +0200, Steffen D. wrote: > When i use the normal bios which is shipped with the hardware - it > works.
Hardware is rarely the problem. > Lspci -vvv also says "Interrupt: pin A routed to IRQ 0" (for the wifi > card). Seems that it is the problem but what can i do now? > > More output from lspci -vvv (PCI2PCI-Bridge) > ----------------------- > 00:0e.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) > (prog-if 00 [Normal decode]) Could you send the corresponding lspci output from when booting the factory BIOS? Seems there's a common problem with LB and PCI-PCI bridges. Also some trouble on the M57SLI discussed right now. Is your bridge also set to subtractive decode with the factory BIOS? > I/O behind bridge: 0000f000-00000fff These two values look wrong. > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff As does these. > Interrupt: pin A routed to IRQ 0 This is definately not right. //Peter -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
