Hi Michael, On 02.10.2007 02:21, Michael van der Kolff wrote: > Uhm, just forgot to attach the additional patch I applied. Here it comes :) > > On 10/2/07, Michael van der Kolff <[EMAIL PROTECTED]> wrote: >> >> I just used r2816 with linuxbios_flashrom_ite_spi_restructured3.diff, >> along with the attached patch (which just adds the different it8716 id >> used on the GA-M61P-S3 board) and got the following output from >> flashrom -V -m gigabyte:m61ps3 >> >> Calibrating delay loop... 793M loops per second. ok >> No LinuxBIOS table found. >> WARNING: No chipset found. Flash detection will most likely fail. >> Found board "GIGABYTE GA-M61P-S3": Enabling flash write... Serial >> flash segment 0xfffe0000-0xffffffff enabled >> Serial flash segment 0x000e0000-0x000fffff enabled >> Serial flash segment 0xffee0000-0xffefffff disabled >> Serial flash segment 0xfff80000-0xfffeffff enabled >> LPC write to serial flash enabled >> serial flash pin 29 >> OK. [...] >> Probing for MX25L4005, 512 KB >> RDID returned c2 20 13 >> probe_spi: id1 0xc2, id2 0x2013 >> MX25L4005 found at physical address: 0xfff80000 >> Flash part is MX25L4005 (512 KB) >> OK, only ENABLING flash write, but NOT FLASHING.
Can you resend the patch with a signed-off-by statement (http://linuxbios.org/Development_Guidelines#Sign-off_Procedure) and a changelog entry? My code is now in subversion, so you might want to rediff your patch and check whether everything still works. You can then include the following Acked-by in your mail: Acked-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]> Regards, Carl-Daniel -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
