See patch.
Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Use the preferred order of 'static const' instead of 'const static'.
This is the common style in both Linux as well as in LinuxBIOS.
Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
Index: fintek.c
===================================================================
--- fintek.c (Revision 2895)
+++ fintek.c (Arbeitskopie)
@@ -29,7 +29,7 @@
#define FINTEK_VENDOR_ID 0x3419
-const static struct superio_registers reg_table[] = {
+static const struct superio_registers reg_table[] = {
{0x0106, "F71862FG", {
{EOT}}},
{0x4103, "F71872F/FG / F71806F/FG", { /* Same ID? Datasheet typo? */
Index: winbond.c
===================================================================
--- winbond.c (Revision 2895)
+++ winbond.c (Arbeitskopie)
@@ -36,7 +36,7 @@
*
* Some other Super I/Os only use bits 3..0 of 0x09 as ID.
*/
-const static struct superio_registers reg_table[] = {
+static const struct superio_registers reg_table[] = {
/* ID and rev[3..0] */
{0x527, "W83977CTF", { /* TODO: Not yet in sensors-detect */
{EOT}}},
Index: ite.c
===================================================================
--- ite.c (Revision 2895)
+++ ite.c (Arbeitskopie)
@@ -26,7 +26,7 @@
#define CHIP_VERSION_REG 0x22
-const static struct superio_registers reg_table[] = {
+static const struct superio_registers reg_table[] = {
{0x8661, "IT8661F", {
/* TODO: Needs different init sequence. */
{NOLDN, NULL,
Index: nsc.c
===================================================================
--- nsc.c (Revision 2895)
+++ nsc.c (Arbeitskopie)
@@ -24,7 +24,7 @@
#define CHIP_ID_REG 0x20 /* Super I/O ID (SID) / family */
#define CHIP_REV_REG 0x27 /* Super I/O revision ID (SRID) */
-const static struct superio_registers reg_table[] = {
+static const struct superio_registers reg_table[] = {
{0xd0, "PC87371", { /* From sensors-detect */
{EOT}}},
{0xdf, "PC97371", { /* From sensors-detect */
Index: superiotool.c
===================================================================
--- superiotool.c (Revision 2895)
+++ superiotool.c (Arbeitskopie)
@@ -170,7 +170,7 @@
{
int i, j, opt, option_index;
- const static struct option long_options[] = {
+ static const struct option long_options[] = {
{"dump", no_argument, NULL, 'd'},
{"verbose", no_argument, NULL, 'V'},
{"version", no_argument, NULL, 'v'},
Index: ali.c
===================================================================
--- ali.c (Revision 2895)
+++ ali.c (Arbeitskopie)
@@ -25,7 +25,7 @@
#define DEVICE_REV_REG 0x1f
-const static struct superio_registers reg_table[] = {
+static const struct superio_registers reg_table[] = {
/* TODO: M5113 doesn't seem to have ID registers? */
{0x5315, "M1535/M1535D/M1535+/M1535D+", {
{NOLDN, NULL,
Index: smsc.c
===================================================================
--- smsc.c (Revision 2895)
+++ smsc.c (Arbeitskopie)
@@ -26,7 +26,7 @@
#define DEVICE_ID_REG 0x20
#define DEVICE_REV_REG 0x21
-const static struct superio_registers reg_table[] = {
+static const struct superio_registers reg_table[] = {
/* The following Super I/Os use the 0x20/0x21 ID registers. */
{0x0e, "LPC47N252", { /* From sensors-detect */
{EOT}}},
Index: superiotool.h
===================================================================
--- superiotool.h (Revision 2895)
+++ superiotool.h (Arbeitskopie)
@@ -100,7 +100,7 @@
void probe_idregs_winbond(uint16_t port);
/** Table of which config ports to probe for each Super I/O family. */
-const static struct {
+static const struct {
void (*probe_idregs) (uint16_t port);
int ports[MAXNUMPORTS]; /* Signed, as we need EOT. */
} superio_ports_table[] = {
signature.asc
Description: Digital signature
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
