> -----Original Message----- > From: Jordan Crouse [mailto:[EMAIL PROTECTED] > Sent: Friday, November 09, 2007 1:32 PM > To: Myles Watson > Cc: linuxbios@linuxbios.org > Subject: Re: Add support for the AMD SimNow (TM) simulator > > On 09/11/07 13:26 -0700, Myles Watson wrote: > > > -----Original Message----- > > > From: Jordan Crouse [mailto:[EMAIL PROTECTED] > > > > > > It will reset once - it shouldn't reset repeatedly (doesn't on my > > > test setup). I haven't tried the public version yet, I'll do that. > > > The issue is on the non-coherent devices - the coherent ones should > > > optimize correctly - if they don't, thats a way bigger problem. > > > > It continuously reset for me. It seems to work fine with a LAB payload > with > > the soft_reset commented out. > > what version of SimNow are you using, and what BSD?
4.4.1 cheetah_1p.bsd When I use cheetah_1p_jh.bsd it works. Myles > > > > > I haven't run into the other issues (beside the reset), so I don't > > > > know how to test them. > > > > > > If it boots quickly, then you don't hit the other problem. If the > > > thing grinds to a halt then you hit it. > > > > Maybe that's related to the single reset? > > No, it has to do with CAR issues on multiple nodes - you might not hit it > if you only have 1 processor x 1 core. > > -- > Jordan Crouse > Systems Software Development Engineer > Advanced Micro Devices, Inc. -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
