Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS.
The developer "uwe" checked in revision 2958 to the LinuxBIOS source repository and caused the following changes: Change Log: Fine-tune the V-link bus between K8T890 and VT8237R and set it to 8X transfer rate (up to 1066 MB/s) similar code placed here would be needed for VT8237A/S etc. Using VIA recommended values despite they are for K8T890CF, this is K8T890CE (still dont know what is exactly different). This patch enables the parity error reporting on V-Link, so it enables NMI generation for the SERR# errors. The NMI may not be generated, maybe port 61h needs some tuning too. Signed-off-by: Rudolf Marek <[EMAIL PROTECTED]> Acked-by: Uwe Hermann <[EMAIL PROTECTED]> Build Log: Compilation of agami:aruma is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=aruma&vendor=agami Compilation of amd:serengeti_cheetah is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=serengeti_cheetah&vendor=amd Compilation of asus:a8v-e_se is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=a8v-e_se&vendor=asus Compilation of iwill:dk8_htx is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=dk8_htx&vendor=iwill If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
