Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "jcrouse" checked in revision 2967 to
the LinuxBIOS source repository and caused the following 
changes:

Change Log:
[LinuxBIOS] flashrom support for AMD Geode CS5536

Attached is a patch that enables AMD Geode CS5536 chipset support.  I
have tested it successfully on a MSM800 board from digital logic.

Signed-off-by: Lane Brooks <[EMAIL PROTECTED]>
Acked-by: Jordan Crouse <[EMAIL PROTECTED]>



Build Log:
Compilation of agami:aruma is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=aruma&vendor=agami
Compilation of amd:serengeti_cheetah is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=serengeti_cheetah&vendor=amd
Compilation of asus:a8v-e_se is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=a8v-e_se&vendor=asus
Compilation of iwill:dk8_htx is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=dk8_htx&vendor=iwill
Compilation of msi:ms9185 is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=ms9185&vendor=msi
Compilation of msi:ms9282 is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=ms9282&vendor=msi
Compilation of supermicro:h8dmr is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=h8dmr&vendor=supermicro
Compilation of tyan:s1846 is still broken
See the error log at 
http://qa.linuxbios.org/log_buildbrd.php?revision=2967&device=s1846&vendor=tyan


If something broke during this checkin please be a pain 
in jcrouse's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     LinuxBIOS automatic build system



-- 
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios

Reply via email to