Hi all, I seem to have a problem when trying to use a lzma pre-compressed payload in buildrom in combination with an etherboot (or filo) payload. Things work fine with a kernel or LAB payload.
I've attached the LinuxBIOS Config.lb I used, and the boot output for etherboot. I recall having similar problems with a filo payload. If I disable CONFIG_COMPRESSED_PAYLOAD_LZMA and CONFIG_PRECOMPRESSED_PAYLOAD in Config.lb and disable the LZMA compression in buildrom's kconfig the Etherboot payload works just fine. Am I doing something stupid? Thanks, Ward. -- Ward Vandewege <[EMAIL PROTECTED]> Free Software Foundation - Senior System Administrator
minicom4.cap
Description: application/cap
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <[EMAIL PROTECTED]> for AMD.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
target m57sli
mainboard gigabyte/m57sli
option ROM_SIZE=0x100000
romimage "normal"
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x20000
option CONFIG_COMPRESSED_PAYLOAD_LZMA=1
option CONFIG_PRECOMPRESSED_PAYLOAD=1
option XIP_ROM_SIZE=0x40000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
payload ../payload.elf
end
romimage "fallback"
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x20000
option CONFIG_COMPRESSED_PAYLOAD_LZMA=1
option CONFIG_PRECOMPRESSED_PAYLOAD=1
option XIP_ROM_SIZE=0x40000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
payload ../payload.elf
end
romimage "failover"
option USE_FAILOVER_IMAGE=1
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=FAILOVER_SIZE
option CONFIG_COMPRESSED_PAYLOAD_LZMA=1
option CONFIG_PRECOMPRESSED_PAYLOAD=1
option XIP_ROM_SIZE=FAILOVER_SIZE
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
