This board (http://www.ieiworld.com/en/product_IPC.asp?model=PCISA-LX)
is based on amd-lx800/cs5536, so most of the on-board hardware is work
normally.
Signed-off-by: Nikolay Petukhov <[EMAIL PROTECTED]>
--
Nikolay
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/cache_as_ram_auto.c LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/cache_as_ram_auto.c
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/cache_as_ram_auto.c 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/cache_as_ram_auto.c 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,138 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ * Borrowed from amd/db800.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/msr.h"
+#include <cpu/amd/lxdef.h>
+#include <cpu/amd/geode_post_code.h>
+#include "southbridge/amd/cs5536/cs5536.h"
+
+#define POST_CODE(x) outb(x, 0x80)
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
+#include "southbridge/amd/cs5536/cs5536_early_setup.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+
+static inline int spd_read_byte(unsigned int device, unsigned int address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#define ManualConf 1 /* Do automatic strapped PLL config */
+#define PLLMSRhi 0x0000059C /* CPU and GLIU mult/div 500/400*/
+#define PLLMSRhi 0x0000049C /* CPU and GLIU mult/div 500/333*/
+#define PLLMSRhi 0x0000039C /* CPU and GLIU mult/div 500/266*/
+//0x0000059C 0000 0000 0000 0000 0000 |0101 1|0|01 110|0
+/* Hold Count - how long we will sit in reset */
+#define PLLMSRlo 0x00DE6000
+
+#define DIMM0 0xA0
+#define DIMM1 0xA2
+
+#include "northbridge/amd/lx/raminit.h"
+#include "northbridge/amd/lx/pll_reset.c"
+#include "northbridge/amd/lx/raminit.c"
+#include "sdram/generic_sdram.c"
+#include "cpu/amd/model_lx/cpureginit.c"
+#include "cpu/amd/model_lx/syspreinit.c"
+
+static void msr_init(void)
+{
+ msr_t msr;
+
+ /* Setup access to the cache for under 1MB. */
+ msr.hi = 0x24fffc02;
+ msr.lo = 0x1000A000; /* 0-A0000 write back */
+ wrmsr(CPU_RCONF_DEFAULT, msr);
+
+ msr.hi = 0x0; /* Write back */
+ msr.lo = 0x0;
+ wrmsr(CPU_RCONF_A0_BF, msr);
+ wrmsr(CPU_RCONF_C0_DF, msr);
+ wrmsr(CPU_RCONF_E0_FF, msr);
+
+ /* Setup access to the cache for under 640K. Note MC not setup yet. */
+ msr.hi = 0x20000000;
+ msr.lo = 0xfff80;
+ wrmsr(MSR_GLIU0 + 0x20, msr);
+
+ msr.hi = 0x20000000;
+ msr.lo = 0x80fffe0;
+ wrmsr(MSR_GLIU0 + 0x21, msr);
+
+ msr.hi = 0x20000000;
+ msr.lo = 0xfff80;
+ wrmsr(MSR_GLIU1 + 0x20, msr);
+
+ msr.hi = 0x20000000;
+ msr.lo = 0x80fffe0;
+ wrmsr(MSR_GLIU1 + 0x21, msr);
+}
+
+static void mb_gpio_init(void)
+{
+ /* Early mainboard specific GPIO setup. */
+}
+
+void cache_as_ram_main(void)
+{
+ POST_CODE(0x01);
+
+ static const struct mem_controller memctrl[] = {
+ {.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}}
+ };
+
+ SystemPreInit();
+ msr_init();
+
+ cs5536_early_setup();
+
+ /* Note: must do this AFTER the early_setup! It is counting on some
+ * early MSR setup for CS5536.
+ */
+ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ mb_gpio_init();
+ uart_init();
+ console_init();
+
+ pll_reset(ManualConf);
+
+ cpuRegInit();
+
+ sdram_initialize(1, memctrl);
+
+ /* Check memory. */
+ /* ram_check(0x00000000, 640 * 1024); */
+
+ /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
+ return;
+}
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/chip.h LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/chip.h
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/chip.h 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/chip.h 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_iei_pcisa_lx_ops;
+
+struct mainboard_iei_pcisa_lx_config {
+ int nothing;
+};
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/cmos.layout LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/cmos.layout
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/cmos.layout 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/cmos.layout 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,74 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+1008 16 h 0 check_sum
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/Config.lb LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/Config.lb
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/Config.lb 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/Config.lb 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,194 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+if HAVE_PIRQ_TABLE
+ object irq_tables.o
+end
+
+if USE_DCACHE_RAM
+ #compile cache_as_ram.c to auto.inc
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+end
+
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+### Should this be in the northbridge code?
+#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+# mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+
+if USE_DCACHE_RAM
+ mainboardinit cpu/amd/model_lx/cache_as_ram.inc
+ mainboardinit ./cache_as_ram_auto.inc
+end
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+chip northbridge/amd/lx
+ device pci_domain 0 on
+ device pci 1.0 on end # Northbridge
+ device pci 1.1 on end # Graphics
+ chip southbridge/amd/cs5536
+ # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
+ # SIRQ Mode = Active(Quiet) mode. Save power....
+ # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
+ register "lpc_serirq_enable" = "0x000010da"
+ register "lpc_serirq_polarity" = "0x0000EF25"
+ register "lpc_serirq_mode" = "1"
+ register "enable_gpio_int_route" = "0x0D0C0700"
+ register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
+ register "enable_USBP4_device" = "1" # 0: host, 1:device
+ register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+ register "com1_enable" = "0"
+ register "com1_address" = "0x3F8"
+ register "com1_irq" = "4"
+ register "com2_enable" = "0"
+ register "com2_address" = "0x2F8"
+ register "com2_irq" = "3"
+ register "unwanted_vpci[0]" = "0" # End of list has a zero
+ device pci 9.0 on end # Slot1
+ device pci a.0 on end # Slot2
+ device pci b.0 on end # Slot3
+ device pci c.0 on end # Slot4
+ device pci e.0 on end # Ethernet 0
+ device pci 10.0 on end # Ethernet 1
+ device pci 11.0 on end # SATA
+ device pci f.0 on # ISA Bridge
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off end # Com2
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off end # CIR
+ device pnp 2e.7 off end # GAME_MIDI_GIPO1
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b off end # HW Monitor
+ end
+ end
+ device pci f.2 on end # IDE Controller
+ device pci f.3 on end # Audio
+ device pci f.4 on end # OHCI
+ device pci f.5 on end # EHCI
+ end
+ end
+ # APIC cluster is late CPU init.
+ device apic_cluster 0 on
+ chip cpu/amd/model_lx
+ device apic 0 on end
+ end
+ end
+end
+
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/failover.c LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/failover.c
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/failover.c 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/failover.c 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "pc80/mc146818rtc_early.c"
+
+static unsigned long main(unsigned long bist)
+{
+ return bist;
+}
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/irq_tables.c LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/irq_tables.c
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/irq_tables.c 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/irq_tables.c 2007-11-26 10:02:48.000000000 +0500
@@ -0,0 +1,298 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ * Borrowed from amd/db800.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/pirq_routing.h>
+
+/* Platform IRQs */
+#define PIRQA 11
+#define PIRQB 10
+#define PIRQC 11
+#define PIRQD 5
+
+/* Link */
+#define LINK_PIRQA 1
+#define LINK_PIRQB 2
+#define LINK_PIRQC 3
+#define LINK_PIRQD 4
+#define LINK_NONE 0
+
+/* Map */
+#define IRQ_BITMAP_LINKA (1 << PIRQA)
+#define IRQ_BITMAP_LINKB (1 << PIRQB)
+#define IRQ_BITMAP_LINKC (1 << PIRQC)
+#define IRQ_BITMAP_LINKD (1 << PIRQD)
+#define IRQ_BITMAP_NOLINK 0x0
+
+#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD)
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32 + 16 * IRQ_SLOT_COUNT, /* there can be total 6 devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
+ EXCLUSIVE_PCI_IRQS, /* IRQs devoted exclusively to PCI usage */
+ 0x1078, /* Vendor */
+ 0x0002, /* Device */
+ 0, /* Crap (miniport) */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
+ 0x62, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+
+ .slots = {
+ [0] = {
+ .slot = 0x0, /* means also "on board" */
+ .bus = 0x00,
+ .devfn = (0x01<<3)|0x0, /* 0x01 is CS5536 */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ }
+ }
+ },
+
+ [1] = {
+ .slot = 0x0, /* means also "on board" */
+ .bus = 0x00,
+ .devfn = (0x0f<<3)|0x0, /* 0x0f is CS5536 (USB, AUDIO) */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQB, /* Audio */
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQD, /* USB */
+ .bitmap = IRQ_BITMAP_LINKD
+ }
+ }
+ },
+
+ [2] = {
+ .slot = 0x0, /* means also "on board" */
+ .bus = 0x00,
+ .devfn = (0x0e<<3)|0x0, /* 0x0e is eth0 */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ }
+ }
+ },
+
+ [3] = {
+ .slot = 0x0, /* means also "on board" */
+ .bus = 0x00,
+ .devfn = (0x10<<3)|0x0, /* 0x10 is eth1 */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ }
+ }
+ },
+
+ [4] = {
+ .slot = 0x0, /* means also "on board" */
+ .bus = 0x00,
+ .devfn = (0x11<<3)|0x0, /* 0x11 is SATA */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ }
+ }
+ },
+
+/*
+ * ################### backplane ###################
+ */
+
+/*
+ * Not exist on IP-6S, but it PCI1 on IP-7S.
+ */
+ [5] = {
+ .slot = 0x1, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x09<<3)|0x0, /* 0x09 is PCI1 */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ }
+ }
+ },
+/*
+ * PCI2 IP-6S
+ */
+ [6] = {
+ .slot = 0x2, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x0a<<3)|0x0, /* 0x0a is PCI2 on IP-6S */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ }
+ }
+ },
+/*
+ * PCI3 IP-6S
+ */
+ [7] = {
+ .slot = 0x3, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x0b<<3)|0x0, /* 0x0b is PCI3 on IP-6S */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ }
+ }
+ },
+/*
+ * PCI4 IP-6S
+ */
+ [8] = {
+ .slot = 0x4, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x0c<<3)|0x0, /* 0x0c is PCI4 on IP-6S */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ }
+ }
+ },
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ /* Put the PIR table in memory and checksum. */
+ return copy_pirq_routing_table(addr);
+}
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/mainboard.c LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/mainboard.c
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/mainboard.c 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/mainboard.c 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,195 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ * Borrowed from amd/db800.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/lxdef.h>
+#include <device/pci_def.h>
+#include "../../../southbridge/amd/cs5536/cs5536.h"
+#include "chip.h"
+
+/* Print the platform configuration - do before PCI init or it will not
+ * work right.
+ */
+void print_conf(void)
+{
+#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
+ int i;
+ unsigned long iol;
+ msr_t msr;
+
+ int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, CPU_DM_CONFIG0,
+ CPU_RCONF_DEFAULT, CPU_RCONF_BYPASS, CPU_RCONF_A0_BF,
+ CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, CPU_RCONF_SMM, CPU_RCONF_DMM,
+ GLCP_DELAY_CONTROLS, GL_END
+ };
+
+ int gliu0_msr_defs[] = { MSR_GLIU0_BASE1, MSR_GLIU0_BASE2,
+ MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
+ GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
+ GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2,
+ MSR_GLIU0_SHADOW, GLIU0_IOD_BM_0, GLIU0_IOD_BM_1,
+ GLIU0_IOD_BM_2, GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2,
+ GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
+ GLIU0_GLD_MSR_COH, GL_END
+ };
+
+ int gliu1_msr_defs[] = { MSR_GLIU1_BASE1, MSR_GLIU1_BASE2,
+ MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5,
+ MSR_GLIU1_BASE6, MSR_GLIU1_BASE7, MSR_GLIU1_BASE8,
+ MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, GLIU1_P2D_R_0,
+ GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
+ GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, GLIU1_IOD_SC_0,
+ GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
+ GLIU1_GLD_MSR_COH, GL_END
+ };
+
+ int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3,
+ CPU_RCONF4, CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
+ };
+
+ int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1,
+ MDD_LEG_IO, MDD_PIN_OPT, MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH,
+ MDD_IRQM_PRIM, GL_END
+ };
+
+ int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF,
+ GLPCI_C0_DF, GLPCI_E0_FF, GLPCI_RC0, GLPCI_RC1, GLPCI_RC2,
+ GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, GL_END
+ };
+
+ int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2,
+ MDD_DMA_SHAD3, MDD_DMA_SHAD4, MDD_DMA_SHAD5, MDD_DMA_SHAD6,
+ MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END
+ };
+
+ printk_debug("---------- CPU ------------\n");
+
+ for (i = 0; cpu_msr_defs[i] != GL_END; i++) {
+ msr = rdmsr(cpu_msr_defs[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
+ cpu_msr_defs[i], msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- GLIU 0 ------------\n");
+
+ for (i = 0; gliu0_msr_defs[i] != GL_END; i++) {
+ msr = rdmsr(gliu0_msr_defs[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
+ gliu0_msr_defs[i], msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- GLIU 1 ------------\n");
+
+ for (i = 0; gliu1_msr_defs[i] != GL_END; i++) {
+ msr = rdmsr(gliu1_msr_defs[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
+ gliu1_msr_defs[i], msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- RCONF ------------\n");
+
+ for (i = 0; rconf_msr[i] != GL_END; i++) {
+ msr = rdmsr(rconf_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- VARIA ------------\n");
+ msr = rdmsr(0x51300010);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi,
+ msr.lo);
+
+ msr = rdmsr(0x51400015);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi,
+ msr.lo);
+
+ printk_debug("---------- DIVIL IRQ ------------\n");
+ msr = rdmsr(MDD_IRQM_YLOW);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi,
+ msr.lo);
+ msr = rdmsr(MDD_IRQM_YHIGH);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH,
+ msr.hi, msr.lo);
+ msr = rdmsr(MDD_IRQM_ZLOW);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi,
+ msr.lo);
+ msr = rdmsr(MDD_IRQM_ZHIGH);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH,
+ msr.hi, msr.lo);
+
+ printk_debug("---------- PCI ------------\n");
+
+ for (i = 0; pci_msr[i] != GL_END; i++) {
+ msr = rdmsr(pci_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- LPC/UART DMA ------------\n");
+
+ for (i = 0; dma_msr[i] != GL_END; i++) {
+ msr = rdmsr(dma_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- CS5536 ------------\n");
+
+ for (i = 0; cs5536_msr[i] != GL_END; i++) {
+ msr = rdmsr(cs5536_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
+ printk_debug("IOR 0x%08X is now 0x%08X\n",
+ GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol);
+ iol = inl(GPIOL_EVENTS_ENABLE);
+ printk_debug("IOR 0x%08X is now 0x%08X\n",
+ GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol);
+ iol = inl(GPIOL_INPUT_INVERT_ENABLE);
+ printk_debug("IOR 0x%08X is now 0x%08X\n",
+ GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol);
+ iol = inl(GPIO_MAPPER_X);
+ printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X,
+ iol);
+#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
+}
+
+static void init(struct device *dev)
+{
+ printk_debug("IEI PCISA-LX ENTER %s\n", __FUNCTION__);
+ printk_debug("IEI PCISA-LX EXIT %s\n", __FUNCTION__);
+}
+
+static void enable_dev(struct device *dev)
+{
+ dev->ops->init = init;
+}
+
+struct chip_operations mainboard_iei_pcisa_lx_ops = {
+ CHIP_NAME("IEI PCISA-LX Mainboard")
+ .enable_dev = enable_dev,
+
+};
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/Options.lb LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/Options.lb
--- LinuxBIOSv2-2986/src/mainboard/iei/pcisa-lx/Options.lb 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/src/mainboard/iei/pcisa-lx/Options.lb 2007-11-26 09:50:43.000000000 +0500
@@ -0,0 +1,180 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_PAYLOAD
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_COMPRESS
+uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses CONFIG_UDELAY_IO
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_VIDEO_MB
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses PIRQ_ROUTE
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE = 256*1024
+
+###
+### Build options
+###
+default CONFIG_CONSOLE_VGA=0
+default CONFIG_VIDEO_MB=8
+default CONFIG_PCI_ROM_RUN=0
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## no MP table
+##
+default HAVE_MP_TABLE=0
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=0
+
+## Delay timer options
+##
+default CONFIG_UDELAY_IO=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=9
+default PIRQ_ROUTE=1
+#object irq_tables.o
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+default FALLBACK_SIZE = 131072
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xc8000
+default DCACHE_RAM_SIZE=0x08000
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+
+default _RAMBASE = 0x00004000
+
+default CONFIG_ROM_PAYLOAD = 1
+
+##
+## The default compiler
+##
+default CROSS_COMPILE=""
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+end
+
diff -Nru LinuxBIOSv2-2986/targets/iei/pcisa-lx/Config.lb LinuxBIOSv2-2986-lx/targets/iei/pcisa-lx/Config.lb
--- LinuxBIOSv2-2986/targets/iei/pcisa-lx/Config.lb 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-lx/targets/iei/pcisa-lx/Config.lb 2007-11-26 10:13:13.000000000 +0500
@@ -0,0 +1,43 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+target pcisa-lx
+mainboard iei/pcisa-lx
+
+option CONFIG_COMPRESS=0
+option CONFIG_PRECOMPRESSED_PAYLOAD=0
+option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0
+option CONFIG_COMPRESSED_PAYLOAD_LZMA=0
+
+# Leave 36k for VSA.
+option ROM_SIZE=512*1024-36*1024
+option FALLBACK_SIZE=ROM_SIZE
+
+option DEFAULT_CONSOLE_LOGLEVEL = 0
+option MAXIMUM_CONSOLE_LOGLEVEL = 0
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_IMAGE_SIZE=96*1024
+ option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+ payload ../../payload.elf
+end
+
+buildrom ./pcisa-lx.rom ROM_SIZE "fallback"
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
