On 02.12.2007 21:05, Harald Gutmann wrote: > Hello! > > As i know the PCI-Express port on that board should work with lb but i've > troubles on using an nvidia-grapic card with the propritary nvidia driver and > lb. i used the revison 2994 for this test with lb-v2. Or is it nessacary to > use a patch to get the PCI-Express working with lb? > > here are some informations on my system: > > dmesg shows the following output according to the nvidia module: > nvidia: module license 'NVIDIA' taints kernel. > NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 > 14:08:38 > PDT 2007 > NVRM: RmInitAdapter failed! (0x12:0x2b:1557) > NVRM: rm_init_adapter(0) failed > > the xorg logfile contains the following error: > (EE) NVIDIA(0): The NVIDIA kernel module does not appear to be receiving > (EE) NVIDIA(0): interrupts generated by the NVIDIA graphics device > (EE) NVIDIA(0): PCI:7:0:0. Please see Chapter 8: Common Problems in the > (EE) NVIDIA(0): README for additional information. > (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! > (EE) Screen(s) found, but none have a usable configuration. > > > where the last two lines (beginning with NVRM) in the dmesg appear when i try > to start the xserver with the nvidia grapics driver. > > attached is the superio output from lb, and from the propritary bios. >
Please attach lspci -vvvxxx under lb and prop as well. I suspect some age-old PCI setup difference may be causing problems here. And I have no idea whether we boot the Nvidia graphics BIOS or not. A LinuxBIOS serial capture should help to clear that up. Regards, Carl-Daniel -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
