On Mon, 2007-12-10 at 17:32 -0700, Marc Jones wrote:
>
> Steve Isaacs wrote:
> >
> > INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
> >
> > Issuing SOFT_RESET...
> >
>
> When I have seen a soft reset at this point it has been due to a memory
> problem. Try simpler configurations and try putting some basic memory
> test just before CAR is disabled. I would try on the interesting
> boundaries. For example, check where LinuxBIOS gets copied at 2MB and
> across a dimm boundary like 1GB+2MB.
>
> ram_check(0x00200000, 0x00200000 + (640 * 1024));
> ram_check(0x40200000, 0x40200000 + (640 * 1024));
>
> Also, most of the memory registers are located in Function 2 if you
> decide to dump and compare them.
>
Thanks, I'll give it a try. So, it may be that this problem is masking a
correct config?
It might be tomorrow or the next day before I have a result. I've got
meetings and a doc to finish.
Steve
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
