On 18.12.2007 15:56, Carl-Daniel Hailfinger wrote: > Add support for reading the AMD/ATI RV630 graphics chipset flash ROM. > Needs a board enable command line option (flashrom -m AMDATI:RV630) > Works with RV630, but BAR addresses have to be fixed up. > A timing issue causes all reads to be right-shifted by one bit, > resulting in the loss of the LSB. > For better debugging, I have to know the exact model of the flash chip > and the frequency currently on the SCK connector of the flash chip. >
Easiest way to debug would be to try this against a not POSTed card (secondary card) and then try it again when the card is POSTed. Compare the results (including status registers). Send them to the list. Regards, Carl-Daniel -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
