After trying VGABIOS, I also tried emulator program. but it also didn't work.
As for geforce2, linux totoally locks up.
As for Millennium I, it output segmentation fault like below.
----------------
# ./testbios-mil1 -v vgabios.mil1
running file vgabios.mil1
No size specified. defaulting to 32k
No base specified. defaulting to 0xc0000
No initial code segment specified. defaulting to 0xc000
No initial instruction pointer specified. defaulting to 0x0003
heechul: devfn = 0x200
int1a encountered.
EAX=0000b102 EBX=00000000 ECX=00000519 EDX=0000102b
ESP=0000fff0 EBP=00000000 ESI=00000000 EDI=00000000
DS=0040 ES=0000 SS=0030 CS=c000 EIP=00006206
NV UP DI PL ZR NA PE NC
Segmentation fault
----------------
I adjusted devfn value as 0x200 because mil1 is on bus 2, slot 0, function 0.
all of my tested vga cards ( mga mil1, geforce2, .. ) have rom on it. and my
motherboard is 815ep based ms7057c.
-
HeeChul Yun,
Embedded S/W Team at ETRI
e-mail: [EMAIL PROTECTED]
phone: +82-42-860-1673
> -----Original Message-----
> From: Ronald G Minnich [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, June 08, 2002 12:46 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: About VGABIOS support
>
>
> I forgot one thing. I think you should try to use the emulator program
> first before trying with linuxbios. There may be BIOS
> interrupts that are
> used in your VGA cards that are not supported yet.
>
> If you find such problems can you let me know?
>
> ron
>
