* Huang-Jen Wang <[EMAIL PROTECTED]> [050412 10:46]: > Hi Stefan, > The message as follow: > setup_timers: CPU 2005 MHz > pci_init: Scanning PCI: found 4 devices > malloc_diag: alloc: 184 bytes (4 blocks), free: 16192 bytes (1 blocks) > pci_init: 00:18.0 1022:1100 0600 00 > pci_init: 00:18.1 1022:1101 0600 00 > pci_init: 00:18.2 1022:1102 0600 00 > pci_init: 00:18.3 1022:1103 0600 00 > Press <Enter> for default boot, or <Esc> for boot prompt... timed out > boot: hda2:/boot/vmlinuz root=/dev/hda2 console=tty0 console=ttyS0,115200 > malloc_diag: alloc: 264 bytes (5 blocks), free: 16112 bytes (1 blocks) > malloc_diag: alloc: 280 bytes (6 blocks), free: 16096 bytes (1 blocks) > file_open: dev=hda2, path=/boot/vmlinuz > find_ide_controller: PCI IDE #0 not found > IDE channel 0 not found > devopen: failed to open ide
The IDE controller is not detected. Did you set PCI_BRUTE_SCAN = 1 in the filo config file? Stefan _______________________________________________ LinuxBIOS mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
