Re: [LinuxBIOS] flash issue with AMD Ref board

Thu, 12 May 2005 10:47:33 -0700

It's SST 49LF004. It the replacement for SST49LF040. They use same argorithm to flash. I looked the flash_and_burn utility. That's the case there too.
 
beneo.
 
----- Original Message -----
From: YhLu
Sent: Thursday, May 12, 2005 9:53 AM
Subject: RE: [LinuxBIOS] flash issue with AMD Ref board

SST49LF004 or SST49LF040 ?
 
YH

From: beneo [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 11, 2005 7:20 PM
To: beneo; YhLu; [email protected]
Subject: Re: [LinuxBIOS] flash issue with AMD Ref board

YhLu,
 
EEPOM should be SST 49LF004, sorry.
 
I also get the CPU version, it's a print out from cat /proc/cpuinfo. Total two CPU, I put the the second CPU here.
 
processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 5
model name      : 02/05
stepping        : 8
cpu MHz         : 1395.089
cache size      : 1024 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext l
m 3dnowext 3dnow
bogomips        : 2785.28
 
Thanks
 
Beneo
 
----- Original Message -----
From: beneo
Sent: Wednesday, May 11, 2005 7:14 PM
Subject: Re: [LinuxBIOS] flash issue with AMD Ref board

EEPROM is SST 48LF004.
 
I install 2GB to CPU0 and 2GB to CPU1. I use 512MB DIMM, 4 DIMM per CPU, so total should be 4GB. But linux command cat /proc/meminfo report one 2 GB when using LinuxBIOS.
 
I have two opteron CPU, I'm not sure the version though.
 
thanks
 
beneo
 
----- Original Message -----
From: YhLu
Sent: Wednesday, May 11, 2005 7:27 PM
Subject: RE: [LinuxBIOS] flash issue with AMD Ref board

what is EEPROM in your BIOS socket?
 
How do you install your DIMM? 4x1G in CPU0?
 
What is your cpu version?
 
YH

From: beneo [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 11, 2005 6:57 PM
To: [email protected]
Subject: [LinuxBIOS] flash issue with AMD Ref board

 
I'm playing with the AMD seranede board. The flash_and_burn utility can not program linuxBIOS to the flash. but I can read the linuxbios and save to a file correctly.
 
If I boot from AMI BIOS, using same utility, I can program a linuxBIOS into the flash. That made me believe some setting by linuxBIOS on the AMD Ref board is not right. I just don't know what.
 
I used gdb to trace the code, Flash_and_burn utility enables flash by program two AMD Southbridge 8111 registers, One for enable 4MB window to flash (DevB, 0x43), one for enable write to the flash (DevB, 0x40). I checked the AMD datasheet, it seems all it need. But if I boot with LinuxBIOS, the flash erase command has no effect. with AMI BIOS, I can sucessfully erase a sector.
 
could anybody give me some pointer on what to check?
 
I should add, the linuxBIOS only reports 2GB memory when I really have 4GB in the system. I don't know if this have something to do with my issue.
 
Thanks
 
Beneo
 

_______________________________________________
LinuxBIOS mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios

_______________________________________________
LinuxBIOS mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios

_______________________________________________
LinuxBIOS mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
_______________________________________________
LinuxBIOS mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios

Reply via email to