On Fri, 2005-06-03 at 08:49 -0600, Ronald G. Minnich wrote: > > On Wed, 1 Jun 2005, Hugo MERCIER wrote: > > > I just wanted to test the probing (No erasing or programming yet). > > And ... it fails. flash_rom doesn't find anything : the reported IDs > > bytes are the same as those reported without the probing memory cycles > > (0x555,0xAAA, ...) > > asus loves to put GPIO enables ont their boards to control flash writes. > My guess is you are getting no write cycles to the flash part. > > This is pretty easy to probe for, find the GPIO registers and starting > changing them one at a time, and see if at some point you have flash > writes working. Some of them, when changed, may reset the board ... so be > prepared for that. >
I don't think we have flash_enable for the chipset. So writing command to the flash part has no effect. -- Li-Ta Lo <[EMAIL PROTECTED]> Los Alamos National Lab _______________________________________________ LinuxBIOS mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
