I enable enable com1 get it through. ....
YH
PCI: 00:1f.2 20 * [0x000030a0 - 0x000030af] io
1: PNP: 002e.2 60 * [0x000003f8 - 0x000003ff] io
1: PCI: 00:1f.2 10 * [0x000030b0 - 0x000030b7] io
2: PCI: 00:1f.2 10 * [0x000030b0 - 0x000030b7] io
On 7/5/05, Steve Magnani <[EMAIL PROTECTED]> wrote:
> Might be the keyboard or floppy, too - I turned those off as well.
>
> Steve
> -----Original Message-----
> From: "Steve Magnani" <[EMAIL PROTECTED]>
> To: [email protected], [EMAIL PROTECTED], [email protected]
> Date: Tue, 05 Jul 2005 18:04:38 -0500
> Subject: Re: dead loop in compute_allocate_resource
>
> > I ran into something similar over the weekend, with a s2735 variant
> > (Intel
> > 7501 Xeon development kit) I'm working on. I had assumed it was
> > something
> > I did wrong in Config.lb - I set the USB and IDE devices "on" even
> > though
> > my southbridge LPC setup disables them. When I set the USB and IDE
> > devices
> > "off" in Config.lb my problem went away. Not a solution, I know, but it
> > might help track down the problem.
> >
> > Steve
>
>
>
_______________________________________________
LinuxBIOS mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
