* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [051203 16:04]: > This reason is that linux is not able to locate the interrupt table, > because linuxbios failed to copy the table to the area at 0xf0000: > > .... > Copying IRQ routing tables to 0xf0000...done. > Verifing copy of IRQ routing tables at 0xf0000...failed > Moving GDT to 0x500...ok > Wrote linuxbios table at: 00000530 - 000006b4 checksum e72d > > I saw that this issue was discussed earlier in this list (March 2005, > started by ramesh), but I found no reference as to if and how it was ever > solved.
Are you using LinuxBIOS v1 or v2? Try disabling CONFIG_COMPRESS. The bios area around 0xf0000 is probably readonly, so the write fails. CONFIG_COMPRESS will leave the in-flash copy of the pirq table readable for Linux. Stefan -- LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios
