>> >>MAXIMUM_CONSOLE_LOGLEVEL=8 >>DEFAULT_CONSOLE_LOGLEVEL=8 > > > Chage it to 9. 9 is printk_spew > > However I just looked at the epia-m auto.c main() and the serial port > is not enabled until _after_ enable_smbus(). So something in your > smbus may be hanging things up until it times out. > > Try this: > > in epia-m/auto.c comment out line 124, enable_smbus() and re-run. > With loglevel 9 you should get the "In auto.c main()" message pretty > quick. If that works then try moveing enable_smbus() to after the > serial init. > > If that crashes or hangs then you will have to leave it alone and > debug code prior to main() and find out where its looping to cause the > pause.
Ok, first I have commented out enable_smbus(), for that there are unreadable characters at the console and it takes the same time --> the false way Then I recognized the lines above in auto.c, which disable the Firewire stuff, but The Epia-ML does not have Firewire, ok it is the same chipset and the firewire is integrated in the chip, but voila it works. I have commented out line 119-123 and all works fine on high speed :D Is there a better way? And now, the next problem. It is possible to get the vesafb on boottime. Because, there is no longer a bootsplash :( Stefan means, I need an CLE266 fb kerneldriver and it should work, but via offered a kernel modul, only Know anybody a kernel fb driver for that chipset. chris -- LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios
