New question #211481 on ADCH++: https://answers.launchpad.net/adchpp/+question/211481
I use adch + + and I have a connection problem I created a hubdc witch adch++ 2.81 on linux I tried it in our university campus where we have NAT ( IPs 192.168.0.1/255) passive mode is the only option. After some checking I saw this http://www.brynosaurus.com/pub/net/p2pnat/img9.png I am in this situation and works well But the next situation does not work http://www.brynosaurus.com/pub/net/p2pnat/img8.png what settings should be made to work? something can be done to work ? my email address is [email protected] Send me an email pls some information : http://www.brynosaurus.com/pub/net/p2pnat/ excuse me but my English is not very good hub isn't on the private network, is on internet is have an ip 86.123.234.248 are 2 university campus, each having a server used as rooter for the private network inside each campus (IP 192.168.0.1/255) server ip university campuses are 193.231.40.44/45 passive mode is the only option to connect to the hub and to download from other users outside the campus users on the private network within a campus can not downlad each other using passive mode hub is made just for the two campuses passive mode and NAT traversal allows users to connect from one campus to campus but not inside two private networks within campuses mode active allows connecting users within the private network on campus 1 and not allow users to connect to the campus 2 http://img109.imageshack.us/img109/9308/63413713.png Green Line allows connection The red line does not allow connection pls contact me with a solution -- You received this question notification because you are a member of Dcplusplus-team, which is an answer contact for ADCH++. _______________________________________________ Mailing list: https://launchpad.net/~linuxdcpp-team Post to : [email protected] Unsubscribe : https://launchpad.net/~linuxdcpp-team More help : https://help.launchpad.net/ListHelp
