On Mon, Aug 11, 2008 at 7:49 AM, km <[EMAIL PROTECTED]> wrote:
> On Sun, Aug 10, 2008 at 3:47 PM, kamal <[EMAIL PROTECTED]> wrote:
>> Mehul Ved wrote:
>>>
>>> On 8/10/08, km <[EMAIL PROTECTED]> wrote:
>>>>
>>>>        MOTHERBOARD     P5K64 WS
>>>
>>> Looking at the specifications[1], doesn't seem it may have serious
>>> problems, except if you're planning to use crossfire. I have no idea
>>> about crossfire support on linux.
>>>
>>
>> i think it's SLI compatible.
>>
>>>>        GPU             NVidia GeForce 9800 GT 512 MB
>>>>                        (denied availability of all specific makes i
>>>>                        mentioned; ZOTAC, XFX, ASUS) :(
>>>
>>> Try rashi peripherals[2]. But why are you buying a crossfire
>>> compatible board with a Nvidia graphics cards?
>>
>> Both the nVidia graphic card and the specified MoBo are SLI compatible,
>> although I won't be using it at least in the immediate future; i look
>> forward to have a dual graphic card setup soon though. Therefore SLI.
>> AFAIK, Crossfire is specific to ATI cards. I just hope I did my homework
>> right :)
>> Will check on this once more and will confirm.
>>
>
> Err! it appears like i didn't do my homework right! Thanks a ton again
> for pointing it out Mehul, you really saved a lot more than just my a.. :P
> I don't know when and how I missed it, but that was a disaster waiting to
> happen!!
>
> P5K64 WS is not an SLI compatible board; neither is P5K WS.
> So am back to square one!  I really owe you one for this Mehul! :)
> Many thanks!!
>
> Sincere apologies to all for this. Big blunder on my part. Lesson learned! I
> think. Will get back with my selection of MoBo, this time, being careful.
>
> --
> Regards
> kamal morjal
> --
> http://mm.glug-bom.org/mailman/listinfo/linuxers
>
Hmmm...
 Dear kamal,

I dunno if this is relevant, but i've been using a similarly
configured workstation system, and think it's config may help you out.
I've used it exclusively on fedora, and never had any issues with any
of the components. Note, I bought this sytem before MAD announced it
was opening up the ATI Chipset documentation, so shortly, i expect
crossfire to be as well supported on linux, if not better than Nvidia
SLI.

1. Mobo - Tyan Thunder n6650W, Dual socket AMD Opteron Compatible
board, Dual Nvidia Chipset, and SLI Capable, with 2 pcie x16 , 2 pcie
x8 , 2 pci-X 64 bit, 1 PCI 32 bit.
2. CPU - AMD Opteron 2212, 2.0 GHZ Dual Core, but the board can take 2
x Quad Core Opterons.
3. Memory - 4 x 1 GB 533 MHZ ECC Memory from Transcend
4. GPU - Geforce 8600GT 512 MB, though i've tried out SLI once with
2xGeforce 7300 256 MB.
5. Optical - Samsung OctoEdge 18x SATA DVD-RW Drive.(Dunno even, it's
been about a year since i got my drive, and it's still going stromg..
as always, YMMV.)

This setup is Rock solid, and when mounted in a VIP cabinet, rather
good looking even:P Plus, the possibility of going to 8 cores once i
can get some moolah is what keeps me going :P

Regards,
R. K. Rajeev
-- 
http://mm.glug-bom.org/mailman/listinfo/linuxers

Reply via email to