On Sunday 06 April 2003 06:24 pm, Nikhil Joshi wrote:
> Hello linuxers,
> However I am not able to ping the client from the server.
> Also the client starts loading the kernel. However the Kernel
> does not load fully and the booting does not continue. I have no clue
> what may be the problem. I went through LTSP documentation but I could
> not figure out from that too.
have you read the Diskless-HOWTO. it preety much tells you what you need to
get diskless machines running. ( we have tried it ! )
i could write it here, but instead me jogging my memory incorrectly, i would
advice you to look it up.
do let me know if you have problems after trying what they have given there.
:-)
> Do I need to use a hub just to connect one Server and one node?
No, you can use a cross cable, ( search google on how to wire your own cross
cable ) AFAIK a cross cable connect the signal from the Tx pin of 1 computer
to the Rx pn of the 2 nd computer and vice-versa.
--
~What this really means is that you realize the true bounds to your
knowledge.~
Steven Brown
--
http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
