Hi all, Sorry for posting a hardware related issue. Any help would be higly appreciated
I have RH 9 installed on my machine.. Currently my PC has PIO 4 and Ultra DMA 2 enabled I want to enable Ultra DMA 3 or 4 or 5 When i try to update my BIOS to change the Ultra DMA Setting, it says "Ultra DMA 3/4 will only work when there is a 80 pin shielded cable" 1) I just wanted to know do we get 80 pin shielded cable in Mumbai (Lamington road)?? 2) How can I identify a "80 pin shielded cable" ? i.e. will it be round or flat like any FRC??? 3) If at all I get a 80 pin Shielded cable what length should i buy? I think FRC's come in 18", 24" sizes. thanks for your help... bala ----------------------------------- Balajee Chandrasekaran MASTEK "Making a valuable difference" Mastek in NASSCOM's 'India Top 20' Software Service Exporters List. In the US, we're called MAJESCO ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Opinions expressed in this e-mail are those of the individual and not that of Mastek Limited, unless specifically indicated to that effect. Mastek Limited does not accept any responsibility or liability for it. This e-mail and attachments (if any) transmitted with it are confidential and/or privileged and solely for the use of the intended person or entity to which it is addressed. Any review, re-transmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. This e-mail and its attachments have been scanned for the presence of computer viruses. It is the responsibility of the recipient to run the virus check on e-mails and attachments before opening them. If you have received this e-mail in error, kindly delete this e-mail from all computers. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
