On Fri, 5 Nov 2004 23:35:09 +0530, "Rony Bill" <[EMAIL PROTECTED]> said: > > ----- Original Message ----- > From: "Sarfaraz Kazi" <[EMAIL PROTECTED]> > > > > > the system went off in the middle of the installation > > process. now when i > > start the machine, the fans work, hdd works, cd drive > > works but i don't get > > any display and no POST,i.e., i'm not getting the > > single beep on boot. the > > hdd activity led stays constantly on. indicates some > > problem with bios. does > > it has to do anything with the fact that i changed the > > cmos battery while > > the system was down? > > Check your processor and then MB if your processor works well on another > MB. > Cross check is the best way to narrow down the posibilities. Remove your > processor and refit the assembly, maybe contact problems. This does not > have > anything to do with software installation. >
as per my observations and experiance some cabinets have this problem ..when you remove the board from cabinet and test it it works fine but as soon as u fix it in the cabinet display goes off .... don't know the reason behind it ... just try this rk > Rony. > > > > -- > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers -- http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
