> Hello Everyone,
>
> MTNL has suddenly decided to do away with new subscriptions for the
> "Telephone for Internet" scheme where it charged a flat fee of Rs.
500/-
> per month for all calls unlimitted to any dialup ISP. The existing
> customers, that includes me, of this scheme are being told to
'kindly
> get lost' by increasing the monthly tarrifs from 500/- to 1000/- for
> Scheme A and 700/- to 1400/- for Scheme B. They are killing the
dialup
> and dialup ISPs and are trying to push Triband down our throats. The
> triband is not viable for me as my usage is above 250 mb and I would
> require to shell out atleast 500/- + 250/- = 750/- every month and
that
> too would be a limit of 400 MB. R-Connect gives me 1 GB for Rs
650/-.
>
> I want to break MTNL's linux monopoly by using my newly acquired
> Reliance LSP350R for net usage in Linux. The Mandrake 10.1 does not
> mount it, although it detects it, inspite of all commands tried from
the
> internet. The FC4 distro can detect it automatically and mounts it
on
> /ttyACM0. The problem is that I am not able to get it talking in
KPPP.
>
> I tried the initialising string as it exists in the windows. I don't
> know what should be the 'Flow Control' option Hardware/Software/None
and
> the Line Termination CR/LF/Both.
>
> Has anyone successfully used this new model LSP350R for r-connect in
> linux. If so, please help me by giving me the detailed settings for
the
> same. From 1st November the new tarrifs will be applicable so by
then I
> have to make the necessary crossover.
>
> Regards,
>
> Rony.
>
Perhaps this may help. Courtesy Mr. S . K. Goel
([EMAIL PROTECTED]) .
Regards,
Komal
Create a file /etc/wvdial.conf having following entries :-
[Modem0]
Modem= /dev/ttyUSB0
Baud= 115200
SetVolume=0
DialCommand= ATDT
FlowControl= Hardware(CRTSCTS)
[Dialer R]
Username= my phone number
Password= my phone number
Phone= #777
Stupid Mode= 1
Inherits= Modem0
Step -- 2.
==========
Create a file /etc/resolv.conf having following entries :-
nameserver 202.138.103.100
nameserver 202.138.97.193
nameserver 127.0.0.1
Step -- 3.
==========
Give command
service named start
Step -- 4.
==========
login as root
type following command
modprobe uhci
modprobe usbserial
modprobe ftdi_sio
For Connecting to internet type
=================================
wvdial R
--
http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
