On Mon, Oct 11, 2010 at 11:02 AM, Dattatray Kamble <[email protected]> wrote: ... snip ...
> I have few public IP's ..I don't have modem...My proxy configured as > transparent with two ethernet cards. > If i apply DNAT rule then i can access the vsftpd system locally with > public ip.but i can't access the system on lan.. > > The rule applied as follows -- > > #iptables -t nat -A PREROUTING -d 118.x.x.x -j DNAT --to 192.y.y.y > > this 118.x.x.x is no where assigned in the network so where should i apply > port forwarding if no ethernet card available for that ip. Please see [1]. Your ISP must have installed some kind of box on your premise that converts the media from cable/ DSL / leased line / to Ethernet frames to connect to your LAN. You need to read the docs on that device and/or talk to the support guys @ your ISP. Your 118.x.x.x is most likely assigned to that box. > i am struggling on this issue since 5 days. [1] I would strongly advice you to learn the basics of network topology in a visual form. IMO, w/o a visual topology it is difficult to explain how your network is setup and w/o that info it is next to impossible for anyone to help you. You may continue to struggle for many more days if you are unwilling to take this step. -- Arun Khan -- http://mm.glug-bom.org/mailman/listinfo/linuxers
