On Wednesday 13 October 2010 10:27 AM, Dattatray Kamble wrote:
>
> Hi,
>
> I have public ip's range 118.y.y.1 - 118.y.y.5
> Squid is running on 118.y.y.1 ( eth1 )& 192.x.x.1 ( eth0 )
> My vsftpd is running on 192.y.y.5 in internal lan.
> Now i want to use one of my public ip 118.y.y.2, for accessing vsftpd from
> outside.
>
These are your earlier statements....
"Internet ---> Proxy (Squid) ------> FTP server
eth0-192.y.y.y 192.y.y.y
eth1-118.x.x.x "
" I want to configure ftp to different public ip other than squid's
public ip. "
" If i apply DNAT rule then i can access the vsftpd system locally with public
ip.but i can't access the system on lan.."
"this 118.x.x.x is no where assigned in the network so where should i apply
port forwarding if no ethernet card available for that ip."
" It's the Public IP pool provided from ISP. The IP's not configured
anywhere in the network. "
"If any request coming towards 118.y.y.y with port XXXX should forwarded
to 192.x.x.x with port XXXX. [This was already your solution]
I want to assign above rule through iptables. But i don't want to configure the
public ip for vsftpd anywhere. "
"I have public ip's range 118.y.y.1 - 118.y.y.5 Squid is running on 118.y.y.1 (
eth1 )& 192.x.x.1 ( eth0 )
My vsftpd is running on 192.y.y.5 in internal lan. Now i want to use one of my
public ip 118.y.y.2, for accessing vsftpd from
outside."
Go through the above statements and see what a mess you made with your query.
--
As a proper list etiquette...
Please trim your replies.
Post your replies below the relevant original text, leaving a line space.
Do not re-use old messages to write new ones.
Regards,
Rony.
--
http://mm.glug-bom.org/mailman/listinfo/linuxers
