http://www.draisberghof.de/usb_modeswitch/usb_modeswitch.conf# /etc/usb_modeswitch.conf
#
# Last modified: 2009-08-26
#
# Configuration for usb_modeswitch, a mode switching tool for controlling
# flip flop (multiple device) USB gear
#
# Main purpose is to trigger the switching of several known UMTS modems
# from storage device mode ("ZeroCD TM" for use with MS Windows) to modem
# (serial) device mode
#
# Detailed instructions and a friendly forum on the homepage:
# http://www.draisberghof.de/usb_modeswitch
#
# News update: you want to read the paragraph about troubleshooting there
# if you run into problems !!!# Just set or remove the comment signs (# and ;) in order to activate # your device. (Actual entries are further down, after the reference.) # # For custom settings: # Numbers can be decimal or hexadecimal, MessageStrings MUST be # hexadecimal without prepended "0x". Digits 9-16 in the known # MessageStrings are arbitrary; I set them to "12345678" # What it all means (short command line flags appended): # # # * DefaultVendor -v <hex number> # * DefaultProduct -p <hex number> # # This is the ID the USB device shows after having been plugged in. # The program needs this; if not found -> no action. # # # * TargetVendor -V <hex number> # * TargetProduct -P <hex number> # # These are the IDs of the USB device after successful mode switching. # They are optional, but I recommend to provide them for better analysis. # You definitely need them if you enable CheckSuccess (see below) # # # * TargetProductList (file only) <comma separated hex strings> # # Like TargetProduct, but more than one possibility. Only used in automated # config files (in /etc/usb_modeswitch.d). # # # * TargetClass -C <hex number> # # Some weird devices don't change IDs. They only switch the device class. # If the device has the target class -> no action (and vice versa) # # # * MessageEndpoint -m <hex number> # # A kind of address inside the interface to which the "message" # (the sequence that does the actual switching) is directed. # Starting from version 0.9.7 the MessageEndpoint is autodetected # if not given # # # * MessageContent -M <hex string> # # A hex string containing the "message" sequence; it will be # sent as a USB bulk transfer. # # # * ResponseEndpoint -r <hex number> # * NeedResponse <0/1> -n # # Some devices were reported to require receiving the response of the # bulk transfer to do the switching properly. Usually not needed. # Starting from version 1.0.0 the ResponseEndpoint is autodetected # if not given # # # * DetachStorageOnly <0/1> -d # # Some devices just need to be detached from the usb-storage # driver to initiate the mode switching. Using this feature # instead of removing the whole usbstorage module keeps other # storage devices working. # # # * HuaweiMode <0/1> -H # # Some Huawei devices can be switched by a special control # message. # # # * SierraMode <0/1> -S # # Some Sierra devices can be switched by a special control # message. # # # * SonyMode <0/1> -O # # Some Sony-Ericsson devices can be switched by a special control # message. This is experimental and might not have a stable result # # # * ResetUSB <0/1> -R # # Some devices need a rougher treatment. If the switching seems # to do something (run udevmonitor), but your system does not reflect # it, try this somewhat brutal method to do a reset after switching. # Mind that if your device switched OK before, this will probably set # it back to storage mode ... # # # * Interface -i <hex number> # * Configuration -u <hex number> # * AltSetting -a <hex number> # # More USB parameter to help with tricky devices and for doing lots # of cruel experiments ... # ## Note: ## AltSetting/Configuration changes and ResetUSB are executed after all ## other steps and can be combined or used on their own (e.g. a reset ## might have the same effect as a manual replug) # # # * InquireDevice <0|1> -I (disables inquiry) # # The standard since 1.0.0 is to do a SCSI inquiry on the default device # before other actions. This might be a future way to identify a device # without ambiguities. If it causes trouble with your device, just disable. # # # * CheckSuccess -s <number> # # Check continuously if the switch succeeded for max <number> seconds. # First, an interface access test: most devices vanish after # switching and can't be accessed anymore. # Second, a recount of target devices: one more than at the initial # count, at the same bus with a higher device number -> device # switched fine. # It's safe to give a higher value than needed; checking stops as # soon as the target device is found # # # -> All other entries are just ignored <- # Additional command line flags: # # Verbose output -W # No output at all -q # Other config file -c <file> # For filling in all this information for an unknown device, # see instructions and links on the homepage: # http://www.draisberghof.de/usb_modeswitch # # If you find working codes and configurations, please contribute # them! ;CheckSuccess=2 ####################################################### # Option GlobeSurfer Icon (aka "Vodafone EasyBox") # # The message SHOULD be the same for all Option devices ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x0af0 ;TargetProduct= 0x6600 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000601000000000000000000000000000000" ####################################################### # Option GlobeSurfer Icon 7.2 # # Contributor: The Pharscape Forum ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x0af0 ;TargetProduct= 0x6901 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000601000000000000000000000000000000" ######################################################## # Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II") # # Contributor: Bernd Holzmüller ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x0af0 ;TargetProduct= 0x6600 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000601000000000000000000000000000000" ;ResponseEndpoint=0x84 ######################################################## # Option GlobeTrotter GT MAX "7.2 Ready" # # Contributors: Lucas Benedicic, Morgwai Kotarbinski ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x0af0 ;TargetProduct= 0x6701 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000601000000000000000000000000000000" ######################################################## # Option GlobeTrotter EXPRESS 7.2 (aka "T-Mobile wnw Express II") # # Contributor: Fridtjof Busse ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x0af0 ;TargetProduct= 0x6701 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000601000000000000000000000000000000" # Response reading needed according to one (1) report ;ResponseEndpoint=0x84 ####################################################### # Option GlobeSurfer Icon 7.2, new firmware (HSO driver) # # Vendor/ProductID don't change when switching, only the device # class does. Most new Option devices work with this. Just adapt IDs! # HSO driver support is available at Pharscape (www.pharscape.org) # # Contributor: Paul Hardwick ;DefaultVendor= 0x0af0 ;DefaultProduct= 0x6911 ;TargetClass= 0xff # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000601000000000000000000000000000000" ######################################################## # Option iCON 210 # PROLiNK PHS100 (various looks) # Hyundai Mobile MB-810 # # One report of switching with DetachStorageOnly. Needs at least # a second to settle before binding to usbserial # # Contributor: wahlm, Peter Kraker, Pakdhetimin Sekum ;DefaultVendor= 0x1e0e ;DefaultProduct= 0xf000 ;TargetVendor= 0x1e0e ;TargetProduct= 0x9000 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="555342431234567800000000000006bd000000020000000000000000000000" ;ResponseEndpoint=0x01 ####################################################### # Option iCON 225 HSDPA # # New Firmware. HSO driver support is available at Pharscape (www.pharscape.org) # # Contributor: Matti Viljanen ;DefaultVendor= 0x0af0 ;DefaultProduct= 0x6971 ;TargetClass= 0xff # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243785634120100000080000601000000000000000000000000000000" ####################################################### # Option GlobeTrotter HSUPA Modem (aka "T-Mobile Web'n'walk Card Compact III') # # New Firmware. HSO driver support is available at Pharscape (www.pharscape.org) # # Contributor: Gerold Gruber ;DefaultVendor= 0x0af0 ;DefaultProduct= 0x7011 ;TargetClass= 0xff # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243785634120100000080000601000000000000000000000000000000" ###################################################### # Option iCON 401 # # HSO driver # # Contributor: Vincent Teoh ;DefaultVendor= 0x0af0 ;DefaultProduct= 0x7401 ;TargetClass= 0xff # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243785634120100000080000601000000000000000000000000000000" ;ResponseEndpoint=0x81 ######################################################## # Vodafone K3760 (made by Option, HSO driver) # # Contributor: The Solutor ;DefaultVendor= 0x0af0 ;DefaultProduct= 0x7501 ;TargetClass= 0xff # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243785634120100000080000601000000000000000000000000000000" ######################################################## # AT&T USBConnect Quicksilver (made by Option, HSO driver) # # Contributor: sissie from Bullteam ;DefaultVendor= 0x0af0 ;DefaultProduct= 0xd033 ;TargetClass= 0xff # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243785634120100000080000601000000000000000000000000000000" ######################################################## # Huawei E220 (aka "Vodafone EasyBox II", aka "T-Mobile wnw Box Micro") # Huawei E230 # Huawei E270 # Huawei E870 # and probably most other Huawei devices (just adapt product ID) # # Two options: 1. removal of "usb-storage" 2. the special control # message found by Miroslav Bobovsky # # Contributor: Hans Kurent, Denis Sutter, Vincent Teoh ;DefaultVendor= 0x12d1; ;DefaultProduct= 0x1003 # choose one of these: ;DetachStorageOnly=1 ;HuaweiMode=1 ######################################################## # Huawei E169 # # Contributor: Dale Lane ;DefaultVendor= 0x12d1; ;DefaultProduct= 0x1001 # choose one of these: ;DetachStorageOnly=1 ;HuaweiMode=1 ######################################################## # Huawei E180 # # Contributor: Tom Dawahare ;DefaultVendor= 0x12d1 ;DefaultProduct= 0x1414 # choose one of these: ;DetachStorageOnly=1 ;HuaweiMode=1 ######################################################## # Huawei E630 # # You might also try to use the Huawei sequence with it # # Beware: there are modem-only variants around - no storage, # no switching necessary! # # Contributor: Joakim Wenrgren ;DefaultVendor= 0x1033 ;DefaultProduct= 0x0035 ;TargetVendor= 0x12d1 ;TargetProduct= 0x1003 ;DetachStorageOnly=1 ######################################################## # ZTE MF620 (aka "Onda MH600HS") # # Probably works with DetachStorageOnly too # # Contributor: Flávio Moringa ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0001 # only for reference and 0.x versions # MessageEndpoint=0x04 ;MessageContent="55534243123456780000000000000600000000000000000000000000000000" ######################################################## # ZTE MF622 (aka "Onda MDC502HS") # # Contributor: andylog ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0002 # only for reference and 0.x versions # MessageEndpoint=0x04 ;MessageContent="55534243f8f993882000000080000a85010101180101010101000000000000" ######################################################## # ZTE MF622 (probably different version) # # Contributor: Pedro Algarvio ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0001 ;DetachStorageOnly=1 ######################################################## # ZTE MF628 # # Captured with "usbmon". Has a micro SD slot which can be # activated alternatively # # Contributor: Alvaro Lopes <alvieboy at alvie dot com> ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 # To modem mode: ;TargetVendor= 0x19d2 ;TargetProduct= 0x0015 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="5553424312345678000000000000061b000000030000000000000000000000" # To SD slot mode: ;TargetVendor= 0x05c6 ;TargetProduct= 0x2001 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="55534243123456782000000080000a86010101180101010101000000000000" ;ResponseEndpoint=7 ######################################################## # ZTE MF628+ (tested version from Telia / Sweden) # ZTE MF626 # ZTE MF633 # ZTE MF636 (aka "Telstra / BigPond 7.2 Mobile Card") # # Contributor: Joakim Wennergren ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0031 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456782000000080000c85010101180101010101000000000000" # if that command doesn't work, try the other ("eject") ;MessageContent="5553424312345678000000000000061b000000030000000000000000000000" ######################################################## # ZTE MF638 (aka "Onda MDC525UP") # # Contributor: andylog ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0037 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456782000000080000c85010101180101010101000000000000" ######################################################## # ZTE AC8710 # # Two ID variants known; check your default # # Contributor: Michael Khurtsiya ;DefaultVendor= 0x19d2 ;DefaultProduct= 0xfff5 ;TargetVendor= 0x19d2 ;TargetProduct= 0xffff # No. 2 ;DefaultVendor= 0x19d2 ;DefaultProduct= 0xfff6 ;TargetVendor= 0x19d2 ;TargetProduct= 0xfff1 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="5553424312345678c00000008000069f030000000000000000000000000000" ######################################################## # ZTE AC2710 (EVDO) # # Contributor: Wasim Baig ;DefaultVendor= 0x19d2 ;DefaultProduct= 0xfff5 ;TargetVendor= 0x19d2 ;TargetProduct= 0xffff ;MessageContent="5553424312345678c00000008000069f010000000000000000000000000000" # Just for information: try it with the message from the AC8710 ... ######################################################## # ZTE 6535-Z # # Contributor: David Taillandier ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0052 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456782000000080000c85010101180101010101000000000000" ######################################################## # ONDA MT503HS (most likely a ZTE model) # # Contributor: Lucio Asnaghi a.k.a. kRAkEn/gORe ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0002 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="55534243b0c8dc812000000080000a85010101180101010101000000000000" ######################################################## # ONDA MT505UP (most likely a ZTE model) # # Contributor: Alex Scortegagna ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0002 # only for reference and 0.x versions # MessageEndpoint=0x03 ;MessageContent="55534243123456780000010080000a28000000001c00002000000000000000" ######################################################## # Novatel Wireless Ovation MC950D HSUPA # Novatel Wireless Merlin XU950D # Novatel Wireless Ovation 930D # # Contributor: Razvan Dragomirescu, Mike Kirk ;DefaultVendor= 0x1410 ;DefaultProduct= 0x5010 ;TargetVendor= 0x1410 ;TargetProduct= 0x4400 # only for reference and 0.x versions # MessageEndpoint=0x09 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" # Note: detaching the storage driver might work as well ######################################################## # Novatel U727 USB modem # # Modem only versions (no switching required) are around. # # Contributor: Chris Thielen ;DefaultVendor= 0x1410 ;DefaultProduct= 0x5010 ;TargetVendor= 0x1410 ;TargetProduct= 0x4100 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # Novatel MC990D # # Contributor: Joakim Wennergren ;DefaultVendor= 0x1410 ;DefaultProduct= 0x5020 ;Interface= 5 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # Novatel U760 USB modem # # Contributor: Richard Laager ;DefaultVendor= 0x1410 ;DefaultProduct= 0x5030 ;TargetVendor= 0x1410 ;TargetProduct= 0x6000 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # Alcatel One Touch X020 (aka OT-X020, aka MBD-100HU, aka Nuton 3.5G), works with Emobile D11LC # Alcatel One Touch X030 (aka OT-X030, aka Nuton NT36HD) # # Contributor: Aleksandar Samardzic, Marcelo Fernandez ;DefaultVendor= 0x1c9e ;DefaultProduct= 0x1001 ;TargetVendor= 0x1c9e ;TargetProduct= 0x6061 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000606f50402527000000000000000000000" ######################################################## # Alcatel X200/X060S ;DefaultVendor= 0x1bbb ;DefaultProduct= 0xf000 ;TargetVendor= 0x1bbb ;TargetProduct= 0x0000 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456788000000080000606f50402527000000000000000000000" ######################################################## # AnyDATA ADU-500A, ADU-510A, ADU-510L, ADU-520A # # This ID gets an "Option" treatment by newer kernels. # Use module option "option_zero_cd=2" with usb-storage. # A kernel patch to fix the problem is pending # # Contributor: Vladimir Poluektov, Gabriel Smolar ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x16d5 ;TargetProduct= 0x6502 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # BandLuxe C120 # # Reportedly needs several switch calls in a certain order. See # http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=71 # This might be a case to try the new ResetUSB function # # Contributor: Alexander Czigler ;DefaultVendor= 0x1a8d ;DefaultProduct= 0x1000 ;TargetVendor= 0x1a8d ;TargetProduct= 0x1002 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456781200000080000603000000020000000000000000000000" ;ResponseEndpoint=0x82 ######################################################## # Solomon S3Gm-660 # # Same notes apply as with the BandLuxe C120 above # # Contributor: Alexander Czigler ;DefaultVendor= 0x1dd6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x1dd6 ;TargetProduct= 0x1002 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456781200000080000603000000020000000000000000000000" ;ResponseEndpoint=0x82 ######################################################## # C-motech D-50 (aka "CDU-680") # # Interesting notes about the device in the forum post at # http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=69 # # Contributor: Alexander Czigler ;DefaultVendor= 0x16d8 ;DefaultProduct= 0x6803 ;TargetVendor= 0x16d8 ;TargetProduct= 0x6803 # only for reference and 0.x versions # MessageEndpoint=0x07 ;MessageContent="555342431234567824000000800008ff524445564348470000000000000000" ######################################################## # C-motech CGU-628 (aka "Franklin Wireless CGU-628A" aka "4G Systems XS Stick W12") # # Contributor: Mathias Picker ;DefaultVendor= 0x16d8 ;DefaultProduct= 0xf000 ;TargetVendor= 0x16d8 ;TargetProduct= 0x6006 # only for reference and 0.x versions # MessageEndpoint=0x09 ;MessageContent="55534243d85dd88524000000800008ff524445564348470000000000000000" ######################################################## # Toshiba G450 # # Contributor: Mijail Anton ;DefaultVendor= 0x0930 ;DefaultProduct= 0x0d46 ;TargetVendor= 0x0930 ;TargetProduct= 0x0d45 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # UTStarcom UM175 (distributor "Alltel") # # Contributor: Mark A. Ziesemer ;DefaultVendor= 0x106c ;DefaultProduct= 0x3b03 ;TargetVendor= 0x106c ;TargetProduct= 0x3715 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="555342431234567824000000800008ff024445564348470000000000000000" ######################################################## # Hummer DTM5731 # # Contributor: "paul" ;DefaultVendor= 0x1ab7 ;DefaultProduct= 0x5700 ;TargetVendor= 0x1ab7 ;TargetProduct= 0x5731 # only for reference and 0.x versions # MessageEndpoint=0x07 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # A-Link 3GU # # Contributor: A-Link Europe Ltd. ;DefaultVendor= 0x1e0e ;DefaultProduct= 0xf000 ;TargetVendor= 0x1e0e ;TargetProduct= 0x9200 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="5553424312345678000000000000061b000000020000000000000000000000" ######################################################## # Sierra Wireless Compass 597 # # Contributor: Vincent Teoh ;DefaultVendor= 0x1199 ;DefaultProduct= 0x0fff ;TargetVendor= 0x1199 ;TargetProduct= 0x0023 ;SierraMode=1 ######################################################## # Sierra Wireless AirCard 881U (most likely 880U too) # # Contributor: Vincent Teoh ;DefaultVendor= 0x1199 ;DefaultProduct= 0x0fff ;TargetVendor= 0x1199 ;TargetProduct= 0x6856 ;SierraMode=1 ######################################################## # Sony Ericsson MD400 # # This is experimental. Might switch back after some time. Please report! ;DefaultVendor= 0x0fce ;DefaultProduct= 0xd0e1 ;TargetClass= 0x02 ;SonyMode=1 # This might work too instead; subject to testing ;Configuration=2 ######################################################## # LG LDU-1900D EV-DO (Rev. A) # # Recommended init command: ATE0V1&D2&C1S0=0 # # Contributor: Jérôme Oufella ;DefaultVendor= 0x1004 ;DefaultProduct= 0x1000 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="55534243123456780000000000000aff554d53434847000000000000000000" ######################################################## # Samsung SGH-Z810 USB (with microSD card) # # This ID gets an "Option" treatment by newer kernels. # Use module option "option_zero_cd=2" with usb-storage. # A kernel patch to fix the problem is pending # # Contributor: A Friend ;DefaultVendor= 0x05c6 ;DefaultProduct= 0x1000 ;TargetVendor= 0x04e8 ;TargetProduct= 0x6601 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000616000000000000000000000000000000" ######################################################## # MobiData MBD-200HU # # Contributor: Stefan Olejnik ;DefaultVendor= 0x1c9e ;DefaultProduct= 0xf000 ;TargetVendor= 0x1c9e ;TargetProduct= 0x9000 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456788000000080000606f50402527000000000000000000000" ######################################################## # ST Mobile Connect HSUPA USB Modem # # Use /dev/ttyUSB2 for connecting # # Contributor: Vincent Teoh ;DefaultVendor= 0x1c9e ;DefaultProduct= 0xf000 ;TargetVendor= 0x1c9e ;TargetProduct= 0x9063 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456788000000080000606f50402527000000000000000000000" ######################################################## # MyWave SW006 Sport Phone/Modem Combination # # Has a card reader too, working fine # # Contributor: Aaron Guidazzi ;DefaultVendor= 0x1c9e ;DefaultProduct= 0x9200 ;DefaultVendor= 0x1c9e ;DefaultProduct= 0x9202 # only for reference and 0.x versions # MessageEndpoint=0x03 ;MessageContent="55534243123456780000000000000606f50402527000000000000000000000" ######################################################## # Cricket A600 # # Switches to ACM device. Might need a ResetUSB after switching - or not # # Contributor: Jeffrey Hoogland ;DefaultVendor= 0x1f28 ;DefaultProduct= 0x0021 ;TargetVendor= 0x1f28 ;TargetProduct= 0x0020 # only for reference and 0.x versions # MessageEndpoint=0x08 ;MessageContent="555342431234567824000000800108df200000000000000000000000000000" # Afterwards (optional): "usb_modeswitch -v 0x1f28 -p 0x0020 -R" ######################################################## # EpiValley SEC-7089 (featured by Alegro and Starcomms / iZAP) # # Contributor: Chris Wright ;DefaultVendor= 0x1b7d ;DefaultProduct= 0x0700 ;TargetVendor= 0x1b7d ;TargetProduct= 0x0001 # only for reference and 0.x versions # MessageEndpoint=0x07 ;MessageContent="555342431234567824000000800008FF05B112AEE102000000000000000000" ######################################################## # Samsung U209 # # Has a modem and a storage device after switching # # Contributor: Arif Ahmed ;DefaultVendor= 0x04e8 ;DefaultProduct= 0xf000 ;TargetVendor= 0x04e8 ;TargetProduct= 0x6601 # only for reference and 0.x versions # MessageEndpoint=0x05 ;MessageContent="55534243123456780000000000000616000000000000000000000000000000" ######################################################## # Huawei E1692 # # Contributor: Roberto Riggio ;DefaultVendor= 0x12d1 ;DefaultProduct= 0x1446 # choose one of these: ;DetachStorageOnly=1 ;HuaweiMode=1 ######################################################## # Huawei E270+ (HSPA+ modem) # # The "option" driver may bind to it out of the box # depending on kernel version # # Huawei's software on Windows uses the card in "NDIS mode" # with an Ethernet interface (this should be possible to do # in Linux as well; cdc-ether?) # # Contributor: Paranoid Paranoia ;DefaultVendor= 0x12d1 ;DefaultProduct= 0x1446 ;TargetVendor= 0x12d1 ;TargetProduct= 0x14ac ;MessageContent="55534243123456780000000000000011060000000000000000000000000000" ;CheckSuccess=5 ######################################################## # Huawei E1550 # # Contributor: Anders Blomdell, Ahmed Soliman ;DefaultVendor= 0x12d1 ;DefaultProduct= 0x1446 ;TargetVendor= 0x12d1 ;TargetProduct= 0x1001 # only for reference and 0.x versions # MessageEndpoint=0x01 ;MessageContent="55534243123456780000000000000011060000000000000000000000000000" ######################################################## # ZTE K3520-Z # # Contributor: Paul McDermott ;DefaultVendor= 0x19d2 ;DefaultProduct= 0x2000 ;TargetVendor= 0x19d2 ;TargetProduct= 0x0055 # only for reference # MessageEndpoint=0x09 ;MessageContent="55534243123456782000000080000c85010101180101010101000000000000" ######################################################## # MobiData MBD-100HU # # Unconfirmed. Please report! # # Contributor: Chris ? ;DefaultVendor= 0x1c9e ;DefaultProduct= 0xf000 ;TargetVendor= 0x1c9e ;TargetProduct= 0x9603 ;MessageContent="55534243123456788000000080000606f50402527000000000000000000000" |
