|
http://www.mail-archive.com/[email protected]/msg26932.html Charulatha V This is in prepartion for making GPIO an early platform device. For making GPIO an early platform device, gpio bank's base addresses are moved from gpio.c to plat/gpio.h. This patch also modifies omap_gpio_init() to make use of omap_gpio_chip_init() and omap_gpio_mod_init(). omap_gpio_mod_init() does the module init by clearing the status register and initializing the GPIO control register. omap_gpio_chip_init() initializes the chip request, free, get, set and other function pointers and sets the gpio irq handler. Signed-off-by: Charulatha V <[email protected]> --- arch/arm/plat-omap/gpio.c | 277 ++++++++++++++------------------ arch/arm/plat-omap/include/plat/gpio.h | 68 ++++++++- 2 files changed, 185 insertions(+), 160 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 76a347b..c8f2c3c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -31,7 +31,6 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE 0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -40,15 +39,9 @@ #define OMAP1510_GPIO_INT_STATUS 0x14 #define OMAP1510_GPIO_PIN_CONTROL 0x18 -#define OMAP1510_IH_GPIO_BASE 64 - /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -70,12 +63,6 @@ /* * OMAP7XX specific GPIO registers */ -#define OMAP7XX_GPIO1_BASE 0xfffbc000 -#define OMAP7XX_GPIO2_BASE 0xfffbc800 -#define OMAP7XX_GPIO3_BASE 0xfffbd000 -#define OMAP7XX_GPIO4_BASE 0xfffbd800 -#define OMAP7XX_GPIO5_BASE 0xfffbe000 -#define OMAP7XX_GPIO6_BASE 0xfffbe800 #define OMAP7XX_GPIO_DATA_INPUT 0x00 #define OMAP7XX_GPIO_DATA_OUTPUT 0x04 #define OMAP7XX_GPIO_DIR_CONTROL 0x08 @@ -83,22 +70,9 @@ #define OMAP7XX_GPIO_INT_MASK 0x10 #define OMAP7XX_GPIO_INT_STATUS 0x14 -#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE - /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE 0x48018000 -#define OMAP242X_GPIO2_BASE 0x4801a000 -#define OMAP242X_GPIO3_BASE 0x4801c000 -#define OMAP242X_GPIO4_BASE 0x4801e000 - -#define OMAP243X_GPIO1_BASE 0x4900C000 -#define OMAP243X_GPIO2_BASE 0x4900E000 -#define OMAP243X_GPIO3_BASE 0x49010000 -#define OMAP243X_GPIO4_BASE 0x49012000 -#define OMAP243X_GPIO5_BASE 0x480B6000 - #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 #define OMAP24XX_GPIO_SYSSTATUS 0x0014 @@ -150,26 +124,6 @@ #define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 #define OMAP4_GPIO_CLEARDATAOUT 0x0190 #define OMAP4_GPIO_SETDATAOUT 0x0194 -/* - * omap34xx specific GPIO registers - */ - -#define OMAP34XX_GPIO1_BASE 0x48310000 -#define OMAP34XX_GPIO2_BASE 0x49050000 -#define OMAP34XX_GPIO3_BASE 0x49052000 -#define OMAP34XX_GPIO4_BASE 0x49054000 -#define OMAP34XX_GPIO5_BASE 0x49056000 -#define OMAP34XX_GPIO6_BASE 0x49058000 - -/* - * OMAP44XX specific GPIO registers - */ -#define OMAP44XX_GPIO1_BASE 0x4a310000 -#define OMAP44XX_GPIO2_BASE 0x48055000 -#define OMAP44XX_GPIO3_BASE 0x48057000 -#define OMAP44XX_GPIO4_BASE 0x48059000 -#define OMAP44XX_GPIO5_BASE 0x4805B000 -#define OMAP44XX_GPIO6_BASE 0x4805D000 struct gpio_bank { unsigned long pbase; @@ -181,14 +135,12 @@ struct gpio_bank { u32 suspend_wakeup; u32 saved_wakeup; #endif -#ifdef CONFIG_ARCH_OMAP2PLUS u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; u32 saved_datain; u32 saved_fallingdetect; u32 saved_risingdetect; -#endif u32 level_mask; u32 toggle_mask; spinlock_t lock; @@ -1669,6 +1621,122 @@ static void __init omap_gpio_show_rev(void) */ static struct lock_class_key gpio_lock_class; +static void omap_gpio_mod_init(struct gpio_bank *bank, int id) +{ + if (cpu_class_is_omap2()) { + static const u32 non_wakeup_gpios[] = { + 0xe203ffc0, 0x08700040 + }; + if (id < ARRAY_SIZE(non_wakeup_gpios)) + bank->non_wakeup_gpios = non_wakeup_gpios[id]; + + if (cpu_is_omap44xx()) { + __raw_writel(0xffffffff, bank->base + + OMAP4_GPIO_IRQSTATUSCLR0); + __raw_writel(0x00000000, bank->base + + OMAP4_GPIO_DEBOUNCENABLE); + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); + } else if (cpu_is_omap34xx()) { + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + + OMAP24XX_GPIO_IRQSTATUS1); + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_DEBOUNCE_EN); + + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); + /* Enable autoidle for the OCP interface */ + omap_writel(1 << 0, 0x48306814); + } else if (cpu_is_omap24xx()) + /* Enable autoidle for the OCP interface */ + omap_writel(1 << 0, 0x48019010); + } else if (cpu_class_is_omap1()) { + if (bank_is_mpuio(bank)) + __raw_writew(0xffff, bank->base + + OMAP_MPUIO_GPIO_MASKIT); + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { + __raw_writew(0xffff, bank->base + + OMAP1510_GPIO_INT_MASK); + __raw_writew(0x0000, bank->base + + OMAP1510_GPIO_INT_STATUS); + } + if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { + __raw_writew(0x0000, bank->base + + OMAP1610_GPIO_IRQENABLE1); + __raw_writew(0xffff, bank->base + + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + + OMAP1610_GPIO_SYSCONFIG); + + /* Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + } + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + + OMAP7XX_GPIO_INT_STATUS); + } + } +} + +static void __init omap_gpio_chip_init(struct gpio_bank *bank) +{ + int j, gpio_bank_bits = 16; + static int gpio; + + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) + gpio_bank_bits = 32; /* 7xx has 32-bit GPIOs */ + + if ((bank->method == METHOD_GPIO_24XX) || + (bank->method == METHOD_GPIO_44XX)) + gpio_bank_bits = 32; + + bank->mod_usage = 0; + /* REVISIT eventually switch from OMAP-specific gpio structs + * over to the generic ones + */ + bank->chip.request = omap_gpio_request; + bank->chip.free = omap_gpio_free; + bank->chip.direction_input = gpio_input; + bank->chip.get = gpio_get; + bank->chip.direction_output = gpio_output; + bank->chip.set = gpio_set; + bank->chip.to_irq = gpio_2irq; + if (bank_is_mpuio(bank)) { + bank->chip.label = "mpuio"; +#ifdef CONFIG_ARCH_OMAP16XX + bank->chip.dev = &omap_mpuio_device.dev; +#endif + bank->chip.base = OMAP_MPUIO(0); + } else { + bank->chip.label = "gpio"; + bank->chip.base = gpio; + gpio += gpio_bank_bits; + } + bank->chip.ngpio = gpio_bank_bits; + + gpiochip_add(&bank->chip); + + for (j = bank->virtual_irq_start; + j < bank->virtual_irq_start + gpio_bank_bits; j++) { + lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); + set_irq_chip_data(j, bank); + if (bank_is_mpuio(bank)) + set_irq_chip(j, &mpuio_irq_chip); + else + set_irq_chip(j, &gpio_irq_chip); + set_irq_handler(j, handle_simple_irq); + set_irq_flags(j, IRQF_VALID); + } + set_irq_chained_handler(bank->irq, gpio_irq_handler); + set_irq_data(bank->irq, bank); +} + static int __init _omap_gpio_init(void) { int i; @@ -1779,7 +1847,6 @@ static int __init _omap_gpio_init(void) } #endif for (i = 0; i < gpio_bank_count; i++) { - int j, gpio_count = 16; bank = &gpio_bank[i]; spin_lock_init(&bank->lock); @@ -1791,105 +1858,8 @@ static int __init _omap_gpio_init(void) continue; } - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - - gpio_count = 32; /* 7xx has 32-bit GPIOs */ - } - -#ifdef CONFIG_ARCH_OMAP2PLUS - if ((bank->method == METHOD_GPIO_24XX) || - (bank->method == METHOD_GPIO_44XX)) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writew(0x0015, bank->base + - OMAP4_GPIO_SYSCONFIG); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* - * Initialize interface clock ungated, - * module enabled - */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writew(0x0015, bank->base + - OMAP24XX_GPIO_SYSCONFIG); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* - * Initialize interface clock ungated, - * module enabled - */ - __raw_writel(0, bank->base + - OMAP24XX_GPIO_CTRL); - } - if (i < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[i]; - gpio_count = 32; - } -#endif - - bank->mod_usage = 0; - /* REVISIT eventually switch from OMAP-specific gpio structs - * over to the generic ones - */ - bank->chip.request = omap_gpio_request; - bank->chip.free = omap_gpio_free; - bank->chip.direction_input = gpio_input; - bank->chip.get = gpio_get; - bank->chip.direction_output = gpio_output; - bank->chip.set = gpio_set; - bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { - bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif - bank->chip.base = OMAP_MPUIO(0); - } else { - bank->chip.label = "gpio"; - bank->chip.base = gpio; - gpio += gpio_count; - } - bank->chip.ngpio = gpio_count; - - gpiochip_add(&bank->chip); - - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + gpio_count; j++) { - lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); - set_irq_chip_data(j, bank); - if (bank_is_mpuio(bank)) - set_irq_chip(j, &mpuio_irq_chip); - else - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_simple_irq); - set_irq_flags(j, IRQF_VALID); - } - set_irq_chained_handler(bank->irq, gpio_irq_handler); - set_irq_data(bank->irq, bank); + omap_gpio_mod_init(bank, i); + omap_gpio_chip_init(bank); if (cpu_is_omap34xx() || cpu_is_omap44xx()) { sprintf(clk_name, "gpio%d_dbck", i + 1); @@ -1899,17 +1869,6 @@ static int __init _omap_gpio_init(void) } } - /* Enable system clock for GPIO module. - * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap16xx()) - omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); - - /* Enable autoidle for the OCP interface */ - if (cpu_is_omap24xx()) - omap_writel(1 << 0, 0x48019010); - if (cpu_is_omap34xx()) - omap_writel(1 << 0, 0x48306814); - omap_gpio_show_rev(); return 0; diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index de7c547..a06acb6 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -29,7 +29,8 @@ #include <linux/io.h> #include <mach/irqs.h> -#define OMAP1_MPUIO_BASE 0xfffb5000 +#define OMAP1_MPUIO_BASE 0xfffb5000 +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) @@ -62,8 +63,73 @@ #define OMAP_MPUIO_LATCH 0x34 #endif +/* + * OMAP1510 GPIO base addresses + */ +#define OMAP1510_GPIO_BASE 0xfffce000 +#define OMAP1510_IH_GPIO_BASE 64 + +/* + * OMAP1610 GPIO base addresses + */ +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 + +/* + * OMAP7XX GPIO base addresses + */ +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 + +/* + * omap24xx GPIO base addresses + */ +#define OMAP242X_GPIO1_BASE 0x48018000 +#define OMAP242X_GPIO2_BASE 0x4801a000 +#define OMAP242X_GPIO3_BASE 0x4801c000 +#define OMAP242X_GPIO4_BASE 0x4801e000 + +#define OMAP243X_GPIO1_BASE 0x4900C000 +#define OMAP243X_GPIO2_BASE 0x4900E000 +#define OMAP243X_GPIO3_BASE 0x49010000 +#define OMAP243X_GPIO4_BASE 0x49012000 +#define OMAP243X_GPIO5_BASE 0x480B6000 + +/* + * omap34xx GPIO base addresses + */ +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 + #define OMAP34XX_NR_GPIOS 6 +/* + * OMAP44XX GPIO base addresses + */ +#define OMAP44XX_GPIO1_BASE 0x4a310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 + +#define METHOD_MPUIO 0 +#define METHOD_GPIO_1510 1 +#define METHOD_GPIO_1610 2 +#define METHOD_GPIO_7XX 3 +#define METHOD_GPIO_24XX 5 +#define METHOD_GPIO_44XX 6 + #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) -- 1.6.3.3 -- -- Subscription settings: http://groups.google.com/group/linuxkernelnewbies/subscribe?hl=en |
