Hallo Holger,
> ich nehme an, dass du in dem Zuge auch ein update des Clients gemacht hast?
> Mit neuem Kernel?
Update habe ich gemacht.
> .. und Arbeitet normal.
> Ich nehme an, dass dein Update den grub von linbo entfernt hat? Du
> bootest also ohne Linbo?
Linbo läuft noch immer.
> was für Hardware ist das den?
> lspci > /root/lspci.txt
> und dann die lspci.txt posten.
0:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family
DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family
High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family
PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family
PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family
PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller
(rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port
SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus
Controller (rev 04)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
> Oder sag uns, welcher Chipsatz und welche Graka.
>
> Schau auf dem Client auch, ob es eine /etc/X11/xorg.conf
> gibt.
> Falls ja: posten.
Eine xorg.conf gab es nicht, aber eine xorg.conf.failsafe mit folgendem Inhalt:
Section "Device"
Identifier "Configured Video Device"
Driver "fbdev"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Gruß
Veit
_______________________________________________
linuxmuster-user mailing list
[email protected]
https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
