Hallo Jürgen, hier nochmal zwei Parameter für den Kernel:
"Oddly enough, even though I have an almost identical setup (same motherboard, FX8350 processor), enabling the IOMMU didn't make any difference for me. Still no USB, networking, etc. What did help, though, was adding "iommu=soft" to the kernel command line. Now it all works fine (except that, for some strange reason, my Logitech Zone Touch Mouse doesn't work)." und "I have the same FX8350 running on a Gigabyte 990FXA-UD3 using OpenSuse 13.1. The solution that worked for me was to edit the bootloader using YAST, the default selection (or the selection you are using to load OpenSuse 13.1 in my case), "iommu=pt" after "quiet showopts". For example: "resume=/dev/disk/by-id/ata-Hitachi_HDS721010CLA332_JP2921HQ1076NA-part2 splash=silent quiet showopts iommu=pt" Now all my USB ports 2.0 and 3.0 are working and my internet networking is working too!. Also make sure IOMMU is enabled in BIOS. I hope this helps someone else." Also probir mal als Kernelparameter: iommu=soft oder showopts iommu=pt Viele Grüße Holger -- Mein öffentlicher PGP-key ist hier hinterlegt: pool.sks-keyservers.net _______________________________________________ linuxmuster-user mailing list [email protected] https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
