Sooo, hier die fehlenden Dateien und einige mehr, die mir interessant
vorkamen.
Insbesondere sind ziemlich am Ende der <hwk>_linbo.log einige Warnungen,
die ich verdächtig finde, z.B. "Warning: partition 1 does not end at a
cylinder boundary". Das würde auch zu dem passen, was Ihr so geschrieben
hattet. Allerdings dachte ich, linbo würde das selbständig regeln...
Ganz am Ende sind noch lokale (!) Dateien, die auf einem Rechner, der
heute gerade den Fehler hatte, noch auf der Linux-Partition lagen...
Vielen Dank und Gruß
Christoph
/var/linbo/pxelinux.cfg/<hwk>
-------------------------------------------------------------------------------------------
# use "reboot" instead of "linbo" for clients which need the reboot
workaround
DEFAULT linbo
# you have to uncomment next line if you want to be able to type options
on the boot prompt
#PROMPT 1
# 3 secs boot prompt timeout
TIMEOUT 30
KBDMAP /german.kbd
DISPLAY /boot.msg
# the default boot method, pxe boots linbo kernel directly
LABEL linbo
KERNEL linbo
APPEND initrd=linbofs.lz vga=788 quiet acpi=off pnpbios=off
# boot method to use with reboot workaround
LABEL reboot
KERNEL grub.exe
APPEND keeppxe --config-file=pxe basedir /; default 0; timeout 0;
hiddenmenu; title REBOOT; fallback 1; find --ignore-floppies --ignore-cd
--set-root /.linbo.reboot; cmp /.linbo.reboot /.grub.reboot || ls
FALLBACK; write /.grub.reboot DONE; ls /boot/grub/menu.lst && configfile
/boot/grub/menu.lst; ls /menu.lst && configfile /menu.lst; chainloader
+1; title LINBO PXE; kernel (pd)/linbo quiet vga=788; initrd
(pd)/linbofs.lz;
# to boot LINBO in debug mode simply type "debug" on boot prompt and
press ENTER
LABEL debug
KERNEL linbo
APPEND initrd=linbofs.lz vga=788 debug
<hwk>_linbo.log
-------------------------------------------------------------------------------------------
### New session started at Tue, 19 May 2015 09:20:10 +0200 ###
## Hardware-Setup - Begin ##
1d.7: reg 10: [mem 0xfe0fb800-0xfe0fbbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2928] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x4c00-0x4c07]
pci 0000:00:1f.2: reg 14: [io 0x4880-0x4883]
pci 0000:00:1f.2: reg 18: [io 0x4800-0x4807]
pci 0000:00:1f.2: reg 1c: [io 0x4480-0x4483]
pci 0000:00:1f.2: reg 20: [io 0x4400-0x440f]
pci 0000:00:1f.2: reg 24: [io 0x4080-0x408f]
pci 0000:00:1f.5: [8086:292d] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0x3c00-0x3c07]
pci 0000:00:1f.5: reg 14: [io 0x3880-0x3883]
pci 0000:00:1f.5: reg 18: [io 0x3800-0x3807]
pci 0000:00:1f.5: reg 1c: [io 0x3480-0x3483]
pci 0000:00:1f.5: reg 20: [io 0x3400-0x340f]
pci 0000:00:1f.5: reg 24: [io 0x3080-0x308f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [8086:4237] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0xfe1fe000-0xfe1fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2: bridge window [io 0x6000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff]
pci 0000:00:1c.2: bridge window [mem 0xfc700000-0xfcefffff 64bit pref]
pci 0000:0c:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:0c:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:0c:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
pci 0000:0c:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
pci 0000:0c:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.3: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
pci 0000:0d:00.0: [1180:0832] type 0 class 0x000c00
pci 0000:0d:00.0: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:0d:00.1: [1180:0822] type 0 class 0x000805
pci 0000:0d:00.1: reg 10: [mem 0xfebff400-0xfebff4ff]
pci 0000:0d:00.1: supports D1 D2
pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.1: PME# disabled
pci 0000:0d:00.2: [1180:0843] type 0 class 0x000880
pci 0000:0d:00.2: reg 10: [mem 0xfebff000-0xfebff0ff]
pci 0000:0d:00.2: supports D1 D2
pci 0000:0d:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.2: PME# disabled
pci 0000:0d:00.3: [1180:0592] type 0 class 0x000880
pci 0000:0d:00.3: reg 10: [mem 0xfebfec00-0xfebfecff]
pci 0000:0d:00.3: supports D1 D2
pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.3: PME# disabled
pci 0000:0d:00.4: [1180:0852] type 0 class 0x000880
pci 0000:0d:00.4: reg 10: [mem 0xfebfe800-0xfebfe8ff]
pci 0000:0d:00.4: supports D1 D2
pci 0000:0d:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.4: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff]
(subtractive decode)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2919]
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007ddb0000 - 000000007fffffff
pnp: PnP ACPI: disabled
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2: bridge window [io 0x6000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff]
pci 0000:00:1c.2: bridge window [mem 0xfc700000-0xfcefffff 64bit pref]
pci 0000:0c:00.0: BAR 6: assigned [mem 0xfcf00000-0xfcf0ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.3: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:03: resource 0 [io 0x6000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xfc700000-0xfcefffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0c: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:0c: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0d: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
pci 0000:00:1a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 32 bytes, default 64
platform rtc_cmos: registered platform RTC device (no PNP device found)
microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
microcode: Microcode Update Driver: v2.00 <[email protected]>,
Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 1738
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K
mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
vesafb: mode is 800x600x16, linelength=1600, pages=33
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8800000, using 1875k,
total 32704k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (d0000000 1ff0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005880
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00005800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00005480
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd,
not after
ehci_hcd 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe0fbc00
libata version 3.00 loaded.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0c:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
r8169 0000:0c:00.0: setting latency timer to 64
r8169 0000:0c:00.0: irq 40 for MSI/MSI-X
r8169 0000:0c:00.0: eth0: RTL8168c/8111c at 0xf8552000,
00:23:54:41:0a:33, XID 1c4000c0 IRQ 40
r8169 0000:0c:00.0: eth0: jumbo features [frames: 6128 bytes, tx
checksumming: ko]
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe0fb800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x4c00 ctl 0x4880 bmdma 0x4400 irq 19
ata2: SATA max UDMA/133 cmd 0x4800 ctl 0x4480 bmdma 0x4408 irq 19
ata_piix 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x3c00 ctl 0x3880 bmdma 0x3400 irq 19
ata4: SATA max UDMA/133 cmd 0x3800 ctl 0x3480 bmdma 0x3408 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 8-5: new high-speed USB device number 2 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITADVD-RAM UJ870A, SB23, max UDMA/33
ata2.00: configured for UDMA/33
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1,
caps: 0xd04791/0xb00000/0x20000
psmouse serio4: synaptics: serio: Synaptics pass-through port at
isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST9160827AS, 3.CMF, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9160827AS 3.CM PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870A SB23 PQ: 0 ANSI: 5
Switching to clocksource tsc
usb 3-2: new full-speed USB device number 2 using uhci_hcd
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
## Hardware-Setup - End ##
Possible Bug detected: linbo_cmd already running.
909 root 2752 S /bin/sh /usr/bin/linbo_cmd ready
912 root 2752 R /bin/sh /usr/bin/linbo_cmd ready
Possible Bug detected: linbo_cmd already running.
921 root 2752 S /bin/sh /usr/bin/linbo_cmd ip
924 root 2752 R /bin/sh /usr/bin/linbo_cmd ip
Possible Bug detected: linbo_cmd already running.
960 root 2752 S /bin/sh /usr/bin/linbo_cmd version
963 root 2752 R /bin/sh /usr/bin/linbo_cmd version
Possible Bug detected: linbo_cmd already running.
982 root 2752 S /bin/sh /usr/bin/linbo_cmd cpu
985 root 2752 R /bin/sh /usr/bin/linbo_cmd cpu
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Checking that no-one is using this disk right now ...
OK
Warning: partition 1 does not end at a cylinder boundary
Warning: partition 2 does not start at a cylinder boundary
Warning: partition 2 does not end at a cylinder boundary
Warning: partition 3 does not start at a cylinder boundary
Warning: partition 3 does not end at a cylinder boundary
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
Installation finished. No error reported.
This is the contents of the device map /cache/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(hd0) /dev/sda
kexec -l --append="--config-file=map(rd) (hd0,0); map --hook;
chainloader (hd0,0)/ntldr; rootnoverify(hd0,0) --device-map=(hd0)
/dev/sda" /usr/lib/grub.exe
lokale Datei linbo.log
-------------------------------------------------------------------------------------------
## Hardware-Setup - Begin ##
RT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control
mask: 0x15
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10,
disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 0000000037e80000 - 0000000037ffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x40000000-0xfff7ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xf0012000-0xf0012fff]
pnp 00:01: [mem 0xf0013000-0xf0013fff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xf0012000-0xf0012fff] has been reserved
system 00:01: [mem 0xf0013000-0xf0013fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0070-0x0075]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [mem 0x00000000-0x0009ffff]
pnp 00:06: [mem 0x000e0000-0x000fffff]
pnp 00:06: [mem 0xfff00000-0xffffffff]
pnp 00:06: [mem 0xffee0000-0xffefffff]
pnp 00:06: [mem 0xfec00000-0xfec0ffff]
pnp 00:06: [mem 0xfee00000-0xfee0ffff]
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
system 00:06: [mem 0xffee0000-0xffefffff] has been reserved
system 00:06: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0022]
pnp 00:07: [io 0x002e]
pnp 00:07: [io 0x0092]
pnp 00:07: [io 0x00a8-0x00a9]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0xfe10-0xfe11]
pnp 00:07: [io 0xfe00]
pnp 00:07: [io 0x4000-0x407f]
pnp 00:07: [io 0x4100-0x411f]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0xfe10-0xfe11] has been reserved
system 00:07: [io 0xfe00] has been reserved
system 00:07: [io 0x4000-0x407f] has been reserved
system 00:07: [io 0x4100-0x411f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [mem 0xc9000000-0xc9ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-03]
pci 0000:00:02.0: bridge window [io 0x5000-0x6fff]
pci 0000:00:02.0: bridge window [mem 0xca000000-0xca7fffff]
pci 0000:00:02.0: bridge window [mem 0xc8000000-0xc87fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04-05]
pci 0000:00:03.0: bridge window [io 0x7000-0x8fff]
pci 0000:00:03.0: bridge window [mem 0xca800000-0xcaffffff]
pci 0000:00:03.0: bridge window [mem 0xc8800000-0xc8ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 06-06]
pci 0000:00:13.0: bridge window [mem 0xcb000000-0xcb0fffff]
pci 0000:07:04.1: BAR 0: assigned [mem 0xcb100000-0xcb1000ff]
pci 0000:07:04.1: BAR 0: set to [mem 0xcb100000-0xcb1000ff] (PCI address
[0xcb100000-0xcb1000ff])
pci 0000:07:04.3: BAR 0: assigned [mem 0xcb100100-0xcb1001ff]
pci 0000:07:04.3: BAR 0: set to [mem 0xcb100100-0xcb1001ff] (PCI address
[0xcb100100-0xcb1001ff])
pci 0000:07:04.0: BAR 0: assigned [mem 0xcb100200-0xcb10027f]
pci 0000:07:04.0: BAR 0: set to [mem 0xcb100200-0xcb10027f] (PCI address
[0xcb100200-0xcb10027f])
pci 0000:00:13.1: PCI bridge to [bus 07-07]
pci 0000:00:13.1: bridge window [mem 0xcb100000-0xcb1fffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci 0000:00:13.1: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xc9000000-0xc9ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xca000000-0xca7fffff]
pci_bus 0000:02: resource 2 [mem 0xc8000000-0xc87fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x7000-0x8fff]
pci_bus 0000:04: resource 1 [mem 0xca800000-0xcaffffff]
pci_bus 0000:04: resource 2 [mem 0xc8800000-0xc8ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xcb000000-0xcb0fffff]
pci_bus 0000:07: resource 1 [mem 0xcb100000-0xcb1fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:10.0: PCI INT A disabled
pci 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:10.1: PCI INT B disabled
pci 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.2: PCI INT C disabled
pci 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:10.3: PCI INT D disabled
pci 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.4: PCI INT C disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x48
microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x48
microcode: Microcode Update Driver: v2.00 <[email protected]>,
Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 1754
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:03.0: setting latency timer to 64
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 800x600x16, linelength=1600, pages=127
vesafb: protected mode interface info at c000:ae56
vesafb: pmi: set display start = c00caea4, set palette = c00caf15
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xa0000000, mapped to 0xf8480000, using 1875k,
total 131072k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (a0000000 8000000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
ACPI Error: [Z00C] Namespace lookup failure, AE_NOT_FOUND
(20110623/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node
f603c998), AE_NOT_FOUND (20110623/psparse-536)
ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state
(20110623/ac-118)
input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWB]
input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (25 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
ACPI: Battery Slot [BAT0] (battery present)
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 20, io base 0x00004c00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 22, io base 0x00004c20
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x00004c40
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 23, io base 0x00004c60
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd,
not after
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 21, io mem 0xcb400000
libata version 3.00 loaded.
via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: power state changed by ACPI to D0
pata_via 0000:00:0f.1: power state changed by ACPI to D0
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c90 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4c98 irq 15
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xcb400400,
00:90:f5:5b:2b:d6, IRQ 23
via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7849
advertising 01e1 Link 0000
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi2 : sata_via
scsi3 : sata_via
ata3: SATA max UDMA/133 cmd 0x4cb0 ctl 0x4ca4 bmdma 0x4c80 irq 21
ata4: SATA max UDMA/133 cmd 0x4ca8 ctl 0x4ca0 bmdma 0x4c88 irq 21
ata1.00: ATAPI: TSSTcorpCD/DVDW SN-S082D, SS03, max UDMA/33
ata1.00: configured for UDMA/33
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5
usb 5-7: new high-speed USB device number 2 using ehci_hcd
ata3.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 1596.000 MHz.
Switching to clocksource tsc
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x81a0b1,
caps: 0xa04713/0x204000/0x0
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input5
## Hardware-Setup - End ##
Possible Bug detected: linbo_cmd already running.
922 root 2752 S /bin/sh /usr/bin/linbo_cmd ready
925 root 2752 R /bin/sh /usr/bin/linbo_cmd ready
Possible Bug detected: linbo_cmd already running.
957 root 2752 S /bin/sh /usr/bin/linbo_cmd mac
960 root 2752 R /bin/sh /usr/bin/linbo_cmd mac
mkreiserfs 3.6.21 (2009 www.namesys.com)
Possible Bug detected: linbo_cmd already running.
1240 root 2752 S /bin/sh /usr/bin/linbo_cmd memory
1243 root 2752 R /bin/sh /usr/bin/linbo_cmd memory
mount: /dev/sda already mounted or /mnt busy
Installation finished. No error reported.
This is the contents of the device map /cache/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(hd0) /dev/sda
kexec -l --append="--config-file=map(rd) (hd0,0); map --hook;
chainloader (hd0,0)/ntldr; rootnoverify(hd0,0) --device-map=(hd0)
/dev/sda" /usr/lib/grub.exe
lokale Datei start.conf
-------------------------------------------------------------------------------------------
# LINBO start.conf fuer Windows XP
# Windows XP System auf Partition 1 (FAT32)
# Daten auf Partition 2
# Cache auf Partition 3
# Festplatte 20G (IDE)
[LINBO] # globale Konfiguration
KernelOptions =
Cache = /dev/sda3 # lokale Cache Partition
Server = 10.16.1.1
Group = nwt
RootTimeout = 600 # automatischer Rootlogout nach 600 Sek.
Autopartition = no # keine automatische Partitionsreparatur beim
LINBO-Start
AutoFormat = no # kein automatisches Formatieren aller
Partitionen beim LINBO-Start
AutoInitCache = no # kein automatisches Befüllen des Caches beim
LINBO-Start
DownloadType = rsync # Image-Download per torrent|multicast|rsync,
default ist rsync
BackgroundFontColor = white
ConsoleFontColorStdout = white
ConsoleFontColorStderr = red
[Partition] # Start einer Partitionsdefinition, Windows XP
Dev = /dev/sda1 # Device-Name der Partition (sda1 = erste
Partition auf erster IDE-Platte)
Size = 20971520 # Partitionsgroesse in kB (Bsp.: 5G)
Id = c # Partitionstyp (83 = Linux, 82 = swap, c =
FAT32, 7 = NTFS, ...)
FSType = vfat # Dateisystem auf der Partition
Bootable = no # Bootable-Flag
[Partition] # Start einer Partitionsdefinition, Datenpartition
Dev = /dev/sda2 # Device-Name der Partition (sda2 = zweite
Partition auf erster IDE-Platte)
Size = 10485760 # Partitionsgroesse in kB (Bsp.: 10G)
Id = 7 # Partitionstyp (83 = Linux, 82 = swap, c =
FAT32, 7 = NTFS, ...)
FSType = ntfs # Dateisystem auf der Partition
Bootable = no # Bootable-Flag
[Partition] # Definition der Cache-Partition
Dev = /dev/sda3 # Device-Name der Partition (sda3 = dritte
Partition auf erster IDE-Platte)
Size = # Partitionsgroesse in kB (Bsp.: keine Angabe =
Rest der Platte, ca. 5GB)
Id = 83 # Partitionstyp (83 = Linux, 82 = swap, c =
FAT32, ...)
FSType = reiserfs # Dateisystem fuer Cache-Partition (reiserfs empf.)
Bootable = no # Bootable-Flag
[OS] # Beginn einer
Betriebssystemdefinition
Name = Windows XP # Name des Betriebssystems
Version = # Version (optional, frei
waehlbar)
Description = Windows XP
#Image = winxp-fat.rsync # Dateiname des
differentiellen Images (Erweiterung .rsync)
#Image =
IconName = winxp.png
Image =
BaseImage = nwt.cloop
Boot = /dev/sda1 # Partition, die Kernel &
Initrd enthaelt
Root = /dev/sda1 # Rootpartition, in die das
BS installier ist
# bei Windows ist Boot und
Root immer dieselbe Partition
Kernel = grub.exe # Relativer Pfad zum
Kernel, bei Windows immer grub.exe
Initrd = # Relativer Pfad zur
Initrd, bei Windows immer leer
# Kernel-Parameter fuer
Windows-Boot aus 1. Partition der 1. IDE-Festplatte
# bei SATA-Platten statt
/dev/sda /dev/sda eintragen
Append = # bleibt bei Windows leer
StartEnabled = yes # "Start"-Button anzeigen
SyncEnabled = yes # "Sync+Start"-Button anzeigen
NewEnabled = yes # "Neu+Start"-Button anzeigen
Hidden = yes # verstecke OS-Reiter
Autostart = no # kein automatischer
synchronisierter Start des Betriebssystems
AutostartTimeout = 5
DefaultAction = start
lokale Datei menu.lst (noch ohne Mini-Bootmenü)
-------------------------------------------------------------------------------------------
# This is the default menu.lst which is automatically used by LINBO for
local
# boot with reboot workaround. You don't have to provide it under
/var/linbo.
#
# Grub first tries to find the reboot flag (/.linbo.reboot) which was
created
# by LINBO on the root partition of the os together with the identical grub
# flag (/.grub.reboot).
# If the reboot flag was found grub sets the root partition accordingly and
# compares the two flag files. If they are different grub falls back to the
# second menu entry "LINBO LOCAL" and tries to boot the linbo kernel
from cache.
# If the two flag files were identical grub writes the string "DONE" to the
# grub flag file so that they are different on next boot. After that it
tries
# to boot on three different ways before it falls back to second entry.
# For grub commands see
http://diddy.boot-land.net/grub4dos/files/commands.htm.
default 0
timeout 0
hiddenmenu
title REBOOT
fallback 1
find --ignore-floppies --ignore-cd --set-root /.linbo.reboot
cmp /.linbo.reboot /.grub.reboot || ls FALLBACK
write /.grub.reboot DONE
ls /boot/grub/menu.lst && configfile /boot/grub/menu.lst
ls /menu.lst && configfile /menu.lst
chainloader +1
title LINBO LOCAL
find --ignore-floppies --ignore-cd --set-root /linbofs.lz
kernel /linbo initrd=linbofs.lz vga=788 quiet
initrd /linbofs.lz
_______________________________________________
linuxmuster-user mailing list
[email protected]
https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
