[lmn] linbo dualboot-Installation windows 7 und debain 8.3

Mon, 29 Feb 2016 06:49:23 -0800 

Hallo, 
 
ich bin neu in der Liste, wir wollen in unserer Schule zunächst  einer Raum mit 
30 Arbeitsplätzen plus 2 Lehrerarbeitsplätzen  umgestalten in einen Dualboot 
mit Windows7 (später windows10) und  debian. 
 
Ich habe mich sehr mit den Foren beschäftigt, aber keinen  Lösungsansatz 
gefunden. 
 
Ich habe den server mit linuxmuster babo 6.1.4 erstellt. Die  Linbo-Version ist 
2.2.6. 
 
Anbei habe ich die hoffentlich ausreichenden Dateien start.conf,  
start.conf.r205 für den Raum, start.conf-10.16.205.1, die  workstations und aus 
dem Ordner /var/linbo/pxelinux.cfg/ die  Datei r205, sowie die linbo log-datei. 
 
Ich habe die folgende Installation getätigt 
 
1) gebootet mit pxe 
2) partitioniert 
3) neustart und debian-Installation 
4) Neustart mit pxe und unsychronisierter Start. Diesen Start  bricht er ab 
 
Es kommt: 
List of all partitions 
no filesystem could mount  root, tried: 
kernel panic  - not syncing: VFS Unable to mount root fs on  unknown-block(0,0) 
 
Mir ist klar, dass der client keinen mount-Punkt findet. Aber wie  kann ich das 
einstellen unter linbo? 
Eigentlich liegt debian (8.3) unter /dev/sda2 
 
Vielen Dank für Eure Hilfe 
 
Thomasr205 aus pxelinux.cfg template for the default pxelinux config file
#
# if you don't want this file being overwritten by workstations import remove 
the following line
# ### managed by linuxmuster.net ###
#
# [email protected]
# 10.02.2014
#

# use "reboot" instead of "linbo" for clients which need the reboot workaround 
DEFAULT linbo

# you have to uncomment next line if you want to be able to type options on the 
boot 
# 1

# 3 secs boot  timeout
TIMEOUT 30

KBDMAP /german.kbd
DISPLAY /boot.msg

# the default boot method, pxelinux boots linbo kernel directly
LABEL linbo
KERNEL linbo
APPEND initrd=linbofs.lz vga=788 quiet splash 

# boot method to use with reboot workaround
LABEL reboot
KERNEL grub.exe
APPEND keeppxe --config-file=pxe basedir /; default 0; timeout 0; hiddenmenu; 
title REBOOT; fallback 1; find --ignore-floppies --ignore-cd --set-root 
/.linbo.reboot; cmp /.linbo.reboot /.grub.reboot || ls FALLBACK; write 
/.grub.reboot DONE; ls /boot/grub/menu.lst && configfile /boot/grub/menu.lst; 
ls /menu.lst && configfile /menu.lst; chainloader +1; title LINBO PXE; kernel 
(pd)/linbo quiet splash vga=788 ; initrd (pd)/linbofs.lz;

# to boot LINBO in debug mode simply type "debug" on boot  and press ENTER
LABEL debug
KERNEL linbo
APPEND initrd=linbofs.lz vga=788 debug 

---
Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! 
Rundum glücklich mit freenetMail

Attachment: workstations
Description: Binary data

Attachment: start.conf-10.16.205.1
Description: Binary data

Attachment: start.conf.r205
Description: Binary data

Attachment: start.conf
Description: Binary data

### New session started at Mon, 29 Feb 2016 13:01:21 +0100 ###
## Hardware-Setup - Begin ##
erved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x0400-0x0453]
pnp 00:08: [io  0x0458-0x047f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfec00000-0xfecfffff]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xff000000-0xffffffff]
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x0454-0x0457]
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 1636
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c7: irq 45 for MSI/MSI-X
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:000: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,800000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1875k, total 262080k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (c0000000 fff0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe606000
libata version 3.00 loaded.
ehci_hcd 0000:00:1a0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe605000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf86c2000, c8:60:00:a1:95:c4, XID 0c200000 IRQ 46
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 5-1: new low-speed USB device number 2 using xhci_hcd
Refined TSC clocksource calibration: 2593.459 MHz.
Switching to clocksource tsc
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:108B:0005.0001: input: USB HID v1.11 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input0
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:108B:0005.0002: input: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input1
usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1.5:10
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2.00: failed to resume link (SControl 0)
usb 2-1.6: new low-speed USB device number 4 using ehci_hcd
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-16:1.0/input/input4
generic-usb 0003:046D:C03E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM            PHILIPS  SPD3200L1        L5S4 PQ: 0 ANSI: 0
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
## Hardware-Setup - End ##
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

### New session started at Mon, 29 Feb 2016 13:22:18 +0100 ###
## Hardware-Setup - Begin ##
erved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x0400-0x0453]
pnp 00:08: [io  0x0458-0x047f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfec00000-0xfecfffff]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xff000000-0xffffffff]
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x0454-0x0457]
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 1636
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,800000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1875k, total 262080k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (c0000000 fff0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <[email protected]>
http://www.scyldcom/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe606000
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf86dc000, c8:60:00:a1:95:c4, XID 0c200000 IRQ 51
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe605000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 5-1: new low-speed USB device number 2 using xhci_hcd
Refined TSC clocksource calibration: 2593.459 MHz.
Switching to clocksource tsc
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:108B:0005.0001: input: USB HID v111 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input0
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:108B:0005.0002: input: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input1
usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2.00: failed to resume link (SControl 0)
usb 2-1.6: new low-speed USB device number 4 using ehci_hcd
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4
generic-usb 0003:046D:C03E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM            PHILIPS  SPD3200L1        L5S4 PQ: 0 ANSI: 0
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
## Hardware-Setup - End ##
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Installation finished. No error reported.
This is the contents of the device map /cache/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd0) /dev/sda
kexec -l  --append="root=/dev/sda2 ro splash" /mnt/vmlinuz

### New session started at Mon, 29 Feb 2016 13:27:11 +0100 ###
## Hardware-Setup - Begin ##
erved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x0400-0x0453]
pnp 00:08: [io  0x0458-0x047f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfec00000-0xfecfffff]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xff000000-0xffffffff]
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x0454-0x0457]
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 1636
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,800000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1875k, total 262080k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (c0000000 fff0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe606000
libata version 3.00 loaded.
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 100
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.0: debug port 2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf86dc000, c8:60:00:a1:95:c4, XID 0c200000 IRQ 51
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe605000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 4-1: new high-speed USB device number 2 using ehci_hcd
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 5-1: new low-speed USB device number 2 using xhci_hcd
Refined TSC clocksource calibration: 2593.460 MHz.
Switching to clocksource tsc
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:108B:0005.0001: input: USB HID v1.11 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input0
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:108B:0005.0002: input: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input1
usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi4 : usb-storage 4-1.5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2.00: failed to resume link (SControl 0)
usb 4-1.6: new low-speed USB device number 4 using ehci_hcd
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input4
generic-usb 0003:046D:C03E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM            PHILIPS  SPD3200L1        L5S4 PQ: 0 ANSI: 0
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
## Hardware-Setup - End ##
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Installation finished. No error reported.
This is the contents of the device map /cache/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd0) /dev/sda
kexec -l  --append="root=/dev/sda2 ro splash root=/dev/sda2" /mnt/vmlinuz

### New session started at Mon, 29 Feb 2016 14:11:12 +0100 ###
## Hardware-Setup - Begin ##
erved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x0400-0x0453]
pnp 00:08: [io  0x0458-0x047f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfec00000-0xfecfffff]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xff000000-0xffffffff]
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x0454-0x0457]
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W]
fuse init (API version 7.17)
msgmni has been set to 1636
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,800000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1875k, total 262080k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (c0000000 fff0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 11.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
xhci_hcd 0000:04:000: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf86d8000, c8:60:00:a1:95:c4, XID 0c200000 IRQ 51
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe606000
usb 3-1: new low-speed USB device number 2 using xhci_hcd
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe605000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:108B:0005.0001: input: USB HID v1.11 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input0
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb3/3-1/3-1:1.1/input/input3
generic-usb 0003:108B:0005.0002: input: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input1
usb 5-1: new high-speed USB device number 2 using ehci_hcd
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 2593.459 MHz.
Switching to clocksource tsc
usb 6-1: new high-speed USB device number 2 using ehci_hcd
hub 6-1:10: USB hub found
hub 6-1:1.0: 8 ports detected
ata2.00: failed to resume link (SControl 0)
usb 6-1.5: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi4 : usb-storage 6-1.5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1.01: failed to resume link (SControl 0)
usb 6-1.6: new low-speed USB device number 4 using ehci_hcd
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.0/input/input4
generic-usb 0003:046D:C03E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
scsi 4:0:0:0: CD-ROM            PHILIPS  SPD3200L1        L5S4 PQ: 0 ANSI: 0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
## Hardware-Setup - End ##
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Installation finished. No error reported.
This is the contents of the device map /cache/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd0) /dev/sda
kexec -l  --append="root=/dev/sda2 ro splash root=/dev/sda2" /mnt/vmlinuz

### New session started at Mon, 29 Feb 2016 14:48:58 +0100 ###
## Hardware-Setup - Begin ##
erved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x0400-0x0453]
pnp 00:08: [io  0x0458-0x047f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfec00000-0xfecfffff]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xff000000-0xffffffff]
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x0454-0x0457]
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.17)
msgmni has been set to 1636
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:000: detected 262144K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,800000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1875k, total 262080k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (c0000000 fff0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.93 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver libusual
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
Freeing unused kernel memory: 400k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe606000
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe605000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf86dc000, c8:60:00:a1:95:c4, XID 0c200000 IRQ 51
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 4-1: new high-speed USB device number 2 using ehci_hcd
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 5-1: new low-speed USB device number 2 using xhci_hcd
Refined TSC clocksource calibration: 2593.458 MHz.
Switching to clocksource tsc
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:108B:0005.0001: input: USB HID v111 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input0
input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:108B:0005.0002: input: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:06:00.0-1/input1
usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi4 : usb-storage 4-1.5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2.00: failed to resume link (SControl 0)
usb 4-1.6: new low-speed USB device number 4 using ehci_hcd
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d0/usb4/4-1/4-1.6/4-1.6:1.0/input/input4
generic-usb 0003:046D:C03E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM            PHILIPS  SPD3200L1        L5S4 PQ: 0 ANSI: 0
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
## Hardware-Setup - End ##
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Installation finished. No error reported.
This is the contents of the device map /cache/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd0) /dev/sda
kexec -l  --append="root=/dev/sda2 ro splash root=/dev/sda2" /mnt/vmlinuz


_______________________________________________
linuxmuster-user mailing list
[email protected]
https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user

Antwort per Email an