Am 16. Mai 2016 12:51:17 MESZ, schrieb "Jörg Richter" <[email protected]>: >Hallo Matthias, > >Du musst in der ntp.conf auf dem Client die IP des Servers eintragen, >damit der Client weiß, wo er nach der Uhrzeit fragen soll. > >Viele Grüße > >Jörg Richter > >> Am 16.05.2016 um 12:22 schrieb Matthias Lauffer ><[email protected]>: >> >> Hallo Jürgen, >> >> bei mir gibt es keine ntp.conf auf dem Server >> >> grüße matthias >> >>> Am 16.05.2016 um 11:57 schrieb [email protected]: >>> Hallo Matthias, >>> einfach die IP des Server in /etc/ntp.conf <http://ntp.conf> >eintragen. >>> Gruß Jürgen >>> >>> >>> >------------------------------------------------------------------------ >>> Gesendet mit der Telekom Mail App >>> ><http://www.t-online.de/service/redir/email_app_android_sendmail_footer.htm> >>> >>> >>> >>> --- Original-Nachricht --- >>> *Von: *Matthias Lauffer >>> *Betreff: *Re: [lmn] NTP auf ipfire - duut nett >>> *Datum: *16.05.2016, 11:51 Uhr >>> *An: *Discussions about using linuxmuster.net >>> >>> >>> >>> >>> Hallo Jörg, >>> >>> hui - am Pfingstmontagmittag, so schnell ne Antwort :) >>> >>> Bin leider nicht so firm ... desshalb noch mal nachgefragt: >>> >>> Wie probier ich den? (was mach ich genau...? >>> >>> lg >>> matthias >>> >>>> Am 16.05.2016 um 11:44 schrieb Jörg Richter: >>>> Hallo Matthias, >>>> >>>> probier doch mal den NTP-Server, der auf dem LML-Server läuft. >>>> >>>> >>>> Viele Grüße >>>> >>>> Jörg Richter >>>> >>>> >>>> >>>>> Am 16.05.2016 um 11:40 schrieb Matthias Lauffer: >>>>> Hallo, will nicht unbedingt einen neuen Thread aufmachen. >>>>> >>>>> Meine ubuntu-clients haben nicht immer die richtige Zeit. >>>>> Und dies Problem habe ich schon min. 1 Jahr, da meist andere Dinge >grad >>>>> wichtiger sind ;) >>>>> >>>>>>> hätte gern einen Tipp, wo ich am besten Anfange ....<< >>>>> >>>>> >>>>> >>>>> Hier eine ungefähre Zustandsbeschreibung: >>>>> ---------------------------------------- >>>>> >>>>> Nun habe ich durch Zufall gesehen, dass offensichtlich der ipfire >einen >>>>> "Dienst"? hat? >>>>> >>>>> Und sein mein monipi Läuft bin ich auf folgenden Fehler gestoßen: >>>>> >>>>> ---------------------schnipp----------------------------------- >>>>> Service description NTP Time >>>>> Output of check plugin CRIT - found 5 peers, but none is suitable >>>>> ... >>>>> Currently in downtime no >>>>> In notification period yes >>>>> ... >>>>> >>>>> Check manual (for Check_MK based checks): >>>>> >>>>> This check uses the output of ntpq -p as sent by the agent in >order to >>>>> check the quality of the NTP time synchronization of the client. >If more >>>>> than one peer is available, NTP chooses the "best" of them as >"system >>>>> peer". This check only measures the time difference to that system >peer. >>>>> The check is CRIT or WARN, if the time supplied by the system peer >is >>>>> not good enough (see below for parameters). It is UNKNOWN if no >system >>>>> peer is present or the system peer is unreachable. >>>>> >>>>> The check is CRIT, when there are NTP peers reachable but non of >those >>>>> is used by the NTP daemon. That is the case if the time provided >by >>>>> those peers is too bad. >>>>> >>>>> Note: If you want to check the health of the peers, you might want >to >>>>> use ntp, which creates one individual check per NTP peer. >>>>> ----------------schnapp----------------------------------------- >>>>> >>>>> Ein ps zeigt folgendes: >>>>> 11:14/0 tux /etc/init.d # ps -A|grep ntp >>>>> 1165 ? 00:00:13 ntpd >>>>> 2081 ? 00:00:00 ntpd >>>>> >>>>> Ich glaub hab vor nem Jahr mal versucht ntp zu installieren, bin >mir da >>>>> aber nicht mehr sicher. Weiss nur dass es auch nicht zum Erfolg >geführt >>>>> hat. Mitlerweise sind wir bei linuxmuster.net >>> <http://linuxmuster.net> 6.1. >>>>> Vielleicht sind auch durch updates einige dinge "lahm gelegt" >worden. >>>>> Sicher aus gutem Grund. >>>>> >>>>> Wie würdet Ihr am besten vorgehen? >>>>> >>>>> Viele Grüße >>>>> Matthias - ps erholsame Pfingsttage und Ferien >>>>> _______________________________________________ >>>>> linuxmuster-user mailing list >>>>> [email protected] ><http://lists.linuxmuster.net> >>>>> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user >>>> >>>> _______________________________________________ >>>> linuxmuster-user mailing list >>>> [email protected] ><http://lists.linuxmuster.net> >>>> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user >>> >>> _______________________________________________ >>> linuxmuster-user mailing list >>> [email protected] ><http://lists.linuxmuster.net> >>> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user >>> >>> >>> >>> _______________________________________________ >>> linuxmuster-user mailing list >>> [email protected] >>> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user >> >> _______________________________________________ >> linuxmuster-user mailing list >> [email protected] >> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user > >_______________________________________________ >linuxmuster-user mailing list >[email protected] >https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
Muss ich zuvor auf dem Client ntp irgendwie installieren -- Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet. _______________________________________________ linuxmuster-user mailing list [email protected] https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
